Hamdi D.-E-Mobility Project Manager
Check rate
Experience
E-Mobility Project Manager
DELTA ENERGY SYSTEMS (GERMANY) GmbH
- Analyze subject-specific requirements, taking the project objectives into account (using Doors as a tool)
- Derive work packages and define milestones based on the previous requirements analysis
- Create and continuously update the project plan using MS Project
- Coordinate with departments and series production industrialization
- Review and track milestones and work packages (MS Project, JIRA confluence)
- Prepare monthly presentations for management on the project, project planning, status, and outlook
- Coordinate prototype builds and tests as part of Design Verification
- Document all project activities, including all required forecasts, analyses, recommendations, and plans (A-Spice compliant)
- Coordinate with sites in China and Thailand
Business Consultant
4M KONTEYNER SiSTEMLERI SANAYi VE TiCARET LiMiTED SİRKETi
- Independently develop and design residential containers, office containers, construction containers, and Tinyhouse variants
- Calculate and simulate the required specifications
- Create a factory layout with two different production lines
- Build 15 prototypes for the show area
- Optimize manufacturing costs for series production
- Train and qualify employees for series production
- Develop marketing strategies (applying the marketing mix)
- Develop sales strategies for local markets in Turkey and international markets for export products
Electric Car High-Voltage Expert Trainer
steep GmbH
- Prepare, deliver, and follow up on technical training sessions in person and online
- Create and adapt training concepts and materials for in-person and online teaching
- Further develop teaching and learning programs in collaboration with vehicle manufacturers
- Learn the specifications of the vehicles and technologies covered in training using technical documentation
E-Mobility Project Manager, Control Units/Inverters
SILVER ATENA Electronic Systems Engineering GmbH
- Create milestones and monitor them against time, cost, and quality requirements
- Support the overall project manager for control unit development on mechanical topics and, temporarily, hardware scope
- Report to internal and external stakeholders
- Plan tasks in detail and assign work packages
- Identify critical paths, manage project controls, and report project progress to decision-makers
- Conduct root cause analysis (RCA - Root Cause Analysis) after Design Verification
- Manage communication with customers and suppliers
- Manage suppliers for the EMV filter product scope
- Plan resource allocation within the team
- Conduct tolerance stack-up analysis and derive a fixture/holding concept
- Coordinate with external interfaces in France, Hungary, Japan, India, and China
E-Mobility Project Development, Fuel Cell Vehicle
TURNKEY PROJECTS GmbH
- Prepare market potential analyses and conduct benchmarks
- Determine demand and potential technical development
- Calculate the funding required to build two prototypes
- Set up the E-E architecture in the CAD system and carry out initial sizing of electronic components, the fuel cell, and the powertrain
- Write the business plan and financing concept
- Prepare the concept for public project funding applications
- Build knowledge and expertise in fuel cell technology
E-Mobility Control Unit Project Manager
Rolls-Royce Power Systems AG
- Subproject management for rail hybrid systems (diesel/electric machine) and marine hybrid systems in the high-end yacht segment
- In-house consulting: development, training, and implementation of a change management system
- Wrote training materials for the new change management process in the Diagnostics and Data Management department
- Introduced and trained staff on the PTC Integrity tool for requirements and change management
- Planned and managed work packages, prioritized scheduled change requests, and documented them using PTC Integrity
- Reported status to the overall project manager and department heads
- Planned team resource allocation
- Applied the V-model and CMMI model
E-Mobility E-Motor Project Manager
ZF Sachs E-Mobility Division
- Managed the development of electric motors for BEV vehicles in the Daimler passenger car and commercial vehicle segments
- Detailed project planning and breakdown into work packages
- Reviewed the LOP from earlier project phases
- Conducted stakeholder analysis and initiated escalations at higher levels
- Reported status to internal decision-makers
- Monitored quality criteria and managed the supplier in Slovenia at the electric motor production line
- Coordinated electric machine builds in the prototype workshop
- Met cost and schedule targets
Electromobility Project Manager
TURNKEY PROJECTS GmbH
- Initial design and selection of electronic components
- Developed the architecture and its HW interfaces
- Concept: a fully electric city car, a compact, practical design for everyday use with low weight
- Wrote instructions for installing the components and routing the wiring harness for the complete vehicle on a Mini Cooper test vehicle
- Prepared the master schedule for potential series production development
- Analyzed market potential and wrote the business plan
Project Manager, Hinges and Panoramic Roof
Kico GmbH
- Managed the scope for the McLaren's FKL and HKL hinges, door hinges, and the Audi A7's sunroof and body-in-white components
- Main point of contact for the customer; managed suppliers in the Czech Republic and England, and production in Hungary and Poland
- Tracked delivery dates and managed suppliers and task forces
- Met budget requirements and milestones
- Managed prototype builds and implementation of the Note-3 sampling process
Body-in-White Project Manager
Bertrandt Technologie GmbH
- Managed front and rear hood body components made of aluminum
- Responsible for 236 additional assembly parts (mechanical, electrical, electronic, and mechatronic systems)
- Managed development partners and suppliers
- Task force: tracked delivery dates for particularly challenging suppliers and managed suppliers
- Met cost targets and milestones from design release through tool/milling release
Project Lead, Vehicle Seats
ISRINGHAUSEN GmbH
- Coordinated prototype builds
- Recorded details and variants of vehicle seats and seat benches for the client Volkswagen
- Planned capacity and assignments for prototype production
- Led the prototype production project team and managed development partners and suppliers
- Tracked delivery dates and ensured cost targets and milestones were met
Exhaust Systems Project Manager
Eberspächer GmbH
- Calculations and simulations
- Coordinated calculations and simulations
- Analyzed the mechanical and thermomechanical properties of exhaust systems
- Coordinated concepts with interface teams
- Built and applied FEM calculation models
- Validated results through testing
Business Consultant
Freelance Consultant
- Conducted site analyses in Turkey for investments in renewable energy (biogas plants, photovoltaic systems)
- Developed projects and financing solutions
- Advised investors on local market opportunities
- Sales partnerships with Dreyer & Bosse (combined heat and power plants up to 1 MW capacity) and MT Energy (biogas plants) for the Turkish market
Body-in-White Project Manager
EDAG GmbH & Co. KGaA
- Developed and built a cab prototype, closely aligning requirements with the client
- Developed and coordinated the prototype build
- Managed internal and external interfaces (Netherlands)
- Evaluated flow analyses (CFD) and CAE calculations
- Coordinated and implemented the camouflage concept
- Prepared the build for testing and trials
Development Engineer
Wilhelm Karmann GmbH
Developed a lightweight modular design concept for the Audi A4 Cabriolet
Developed a multifunctional rear wall module system, including the integration of electrical, hydraulic, and safety systems
Designed detailed components using extruded aluminum to achieve high versatility and modularity
Developed the overall vehicle and body-in-white concepts for the Nissan Micra C+C Cabriolet; led the A-pillar and roof area work package
Coordinated interfaces and suppliers in Germany, Japan, and England, and aligned with series production in Japan
Developed the A-pillar for series production using hydroforming technology for the Volvo C70 Cabriolet; designed individual components and coordinated interfaces internally and in Sweden
Developed early-stage alternative body and lightweight design concepts for the ScaLight and ATLAS projects; ran idea workshops, conducted patent research, and designed the floor, tunnel, A-pillar, and side wall work packages
Technologies used: hydroforming, laser welding, roll forming, high-strength steel materials
Coordinated prototype production and internal/external interfaces
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Automotive, Energy, and Manufacturing.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Project Management, Product Development, Strategy, Finance, Sales, and Supply Chain Management.
Skills
Areas Of Expertise:
- Project Manager
- Project Lead
- Interim Management
- Concept Development
- Engineering
Applications / Cad/Pdm Tools:
- Catia V5
- Unigraphics
- Autodesk Inventor 2023
- Ptc Integrity
- Ptc Creo 6.30
- Autocad
- Autodesk Inventor
- Autodesk Plant Design
- Enovia Vpm
- Pvsol Premium (Tool For Designing Photovoltaic Systems)
- Jira
- Doors
Other Tools:
- Rplan
- Ms Office 2021
- Ms Project 2021
Languages
Education
Skilled Worker Certificate · Industrial Mechanic
TH Georg Agricola
Dipl.-Ing. (FH) · General Mechanical Engineering · Bochum, Germany
FH Bochum
Basic Studies · Mechanical Engineering, specialization in Manufacturing Engineering · Bochum, Germany
Certifications & licenses
Qualification as a High-Voltage Technician: Qualified Person for High-Voltage Systems in Motor Vehicles
Training: High-Voltage Expert for High-Voltage Systems in Motor Vehicles
TÜV Certification as a Lighting and LED Design Specialist - TÜV
Statistics
Experience
Global experience
Expertise
Qualifications
Frequently asked questions
Have questions? Find more information here.
Hamdi is based in Cologne, Germany.
Hamdi speaks the following languages: Turkish (Native), German (Advanced), English (Advanced).
Hamdi has at least 22 years of experience. During this time, Hamdi has worked in at least 13 different roles and for 14 different companies. The average length of individual experience is 2 years and 6 months. Note that Hamdi may not have shared all experience and actually has more experience.
Based on recent experience, Hamdi would be well-suited for roles such as: E-Mobility Project Manager, Business Consultant, Electric Car High-Voltage Expert Trainer.
Hamdi's most recent position is E-Mobility Project Manager at DELTA ENERGY SYSTEMS (GERMANY) GmbH.
In recent years, Hamdi has worked for DELTA ENERGY SYSTEMS (GERMANY) GmbH, 4M KONTEYNER SiSTEMLERI SANAYi VE TiCARET LiMiTED SİRKETi, steep GmbH, and SILVER ATENA Electronic Systems Engineering GmbH.
Hamdi is most experienced in industries like Automotive, Energy, and Manufacturing.
Hamdi is most experienced in business areas like Project Management, Product Development, and Strategy. Hamdi also has some experience in Finance, Sales, and Supply Chain Management.
Hamdi has recently worked in industries like Automotive, Energy, and Manufacturing.
Hamdi has recently worked in business areas like Project Management, Product Development, and Marketing.
Hamdi holds a Bachelor in General Mechanical Engineering from TH Georg Agricola and a Bachelor in Industrial Engineering, specialization in Marketing from NWA der FH Osnabrück.
Hamdi has 4 certificates. Among them, these include: Qualification as a High-Voltage Technician: Qualified Person for High-Voltage Systems in Motor Vehicles, Training: High-Voltage Expert for High-Voltage Systems in Motor Vehicles, and TÜV Certification as a Lighting and LED Design Specialist - TÜV.
The availability of Hamdi needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 6 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Hüseyin Ö.
Cavit S.
Johannes F.
Hasan K.
Okan A.
Münevver Y.
Muharrem S.
Serhat K.
Hakan K.
Mirko H.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a E-Mobility Project Manager
Samet P.
Yusuf D.
Erkan S.
Bülent Ö.
Sami D.
Ebru A.
Frank J.
Mesut Y.
Burhan D.
Markus M.
Nearby freelancers
Professionals working in or nearby Cologne, Germany
Juliane W.
Andreas S.
Thorsten H.
Eberhart N.
Panagiotis A.
Denis A.
Suparni N.
Felix R.
Viktor R.
Linda S.
