Pressure Vessel Experts in Germany
in minutes from over 15,000 CVs with the power of AIHire experts who design, check, and document pressure vessels, from ASME Section VIII and EN 13445 work to weld details, nozzle loads, and fabrication support. Get fast, precise matching with vetted, available specialists.
Meet FRATCH Experts in Germany, who have recently used Pressure Vessel
Volker Schreiner
Last position:
Operations Manager ATT Area at Klingelnberg AG
Bridging the vacancy of operations manager ATT area
Process optimization
Reduction of lead times
Reorganization of the ATT area
Increase in OTIF from 73% to 92%
Greater flexibility in employee deployment through internal equipment training
Integration of a new cooperation partner
Implementation of an MDE system
Dirk Volkmann
Last position:
Interim Project Manager at Energy Producer
- Innovation division: Project development for a brownfield biofuel production partnership
Jürgen Rausch
Last position:
Founder / Managing Partner at RAUSCH Unternehmensberatung GmbH
- Business consulting, process consulting, digitalization consulting, and funding consulting as well as coaching for small and medium-sized enterprises (SMEs)
Gregor Pestsov
Last position:
Engineering Data Management Project Manager
Technical and commercial risk assessment for an investment project in the hardware sector (scaling potential, liability risks, operational processes) Process consulting for two SMEs in the engineering environment, focusing on workflow digitization, PLM
Over Díaz
Last position:
Senior Quality Manager at Denys GmbH
- Responsible for quality assurance (QA/QC), as-built documentation and audit planning
- Coordinating inspection of open trench and trenchless construction work (HDD, microtunneling)
- Quality control of HDPE pipe welding, conducting quality tests, pigging, pipe calibration and leak testing (pipe diameters 50–500 mm)
- Ensuring compliance with highest safety, environmental and quality standards
Thierry Hittinger
Last position:
Integration Consultant at Performgate
- Supported the integration of the first acquisitions as part of a buy-and-build strategy
- Optimized the management control systems
Ralf Hirsch
Last position:
HSE Manager at Hitachi Energy
- New build of a converter station in Nortorf/Wilster for Tennet.
- Supervision and coordination of the companies involved in the project.
- Advice and support for the commissioning project management on all occupational and fire safety issues.
- Instruction of companies and their employees about the project specifics during commissioning.
- Requesting and collecting job descriptions and associated risk assessments.
- Supervision and issuing of work permits for respective tasks.
- Monitoring compliance with legal requirements for occupational and fire safety on construction sites.
- Maintaining incident statistics and analyzing incidents.
- Regular inspections and documentation.
- Conducting kick-off meetings with client and contractors.
- Monitoring and ensuring compliance with specific work details.
- Monitoring and ensuring proper protective measures during work.
Manfred Wüst
Last position:
Head of Purchasing and Project Procurement, Special Machine Engineering at Client in Hamburg
- Leading the purchasing team
- Identifying cost saving opportunities and efficiency improvements in the procurement process and implementing process optimizations
- Developing and implementing procurement strategies in coordination with product management (CTO) and operations management (COO)
- Managing and selecting suppliers for high-quality and cost-effective products and services
- Negotiating purchasing contracts and framework agreements
- Monitoring material flow between suppliers, external manufacturing and assembly companies, and in-house production
- Ensuring compliance with quality and delivery standards in coordination with QA (production)
Bernd Schamberger
Last position:
Diplom-Ingenieur, Development Engineer, Senior Design Engineer at Microvision GmbH
- Development of optomechanical components and assemblies in collaboration with systems and optics development, considering feasibility, space requirements, handling, manufacturing aspects and series production suitability
- Preparation of mechanical studies and consulting on studies to meet customer requirements, detailed design and custom fabrication for proof of concept of initial active samples
- Concepts for injection molding tools for first samples and series production
- Prototype designs, prototype manufacturing and CNC small series production
- Design studies for new generations of LiDAR sensors and implementation of specific customer requests, considering conventional and future sensor technologies
- Design of inspection, measuring and testing fixtures, drawing derivation, awarding and supervision of production
- Procurement of special accessories
- Derivations for marketing with renderings, turntable animations, explosion simulations and illustrations
- Assistance with static calibration and LiDAR testing
- Laboratory setups as well as general simulations for lab applications, software-assisted alignment
- Setup and maintenance of a company PDM
Stefan Schotte
Last position:
Interim Manager Project Management PMO at ND Coatings GmbH (Meyer Werft Papaenburg)
Revenue €90M, 50 employees
Industry: shipbuilding, marina
Temporary fill of PMO lead position
Capture and validation of PMO processes
Creation of capacity planning until 2032
Evaluation of standard preservation processes, including VSM and macro mapping
Development of planning tools for project coordinators
Participation in alignment meetings with Meyer Werft
Data provision for monthly review
Contribution to procurement strategy for new ships
Creation of AKV and job descriptions for project managers and project coordinators
Project management of the cruise ship Disney Adventure
Re-design of reporting tool
Development of a planning tool for project coordinators with planning horizon until 2032
Design of an on-call service including work instructions
Creation of costing models for proposals
Project management Disney Adventure
Klaus Brenner
Last position:
Conversion, expansion and new fit-out of a railway station into a restaurant at ILO-Arts Heidelberg
- Coordination and execution of the conversion, expansion and new fit-out of a railway station into a restaurant
Dane Clarke
Last position:
Mechanical Design Engineer at SUSS MicroTec
- Independent work as a Mechanical Design Engineer.
- Design work in SolidWorks 2022.
- Derivation of drawings for created assemblies and individual parts, considering surface finish, machining, and material.
- 3D design and redesign of modules for computer chip manufacturing.
- 3D design and implementation of concepts in close coordination with the design team.
- Design of a solvent (acids and bases) extraction system focusing on cost reduction and automatic retention.
- Use of 3D sketches for the layout of hose guides.
- Reading pneumatic diagrams and implementing them in CAD.
- Development of a gas component plate to supply four lines, including filter integration and design simplification.
- Prototype construction and new development.
- Import and processing of STEP files.
- 3D design of E-cabinet components based on templates.
- Use of PLM systems SAP and ECTR for saving, copying, linking, attaching data, status changes, and versioning.
- Creation of work lists, maintenance of material master data and change numbers.
- Structure maintenance and BOM export.
- Working with transactions for change, document, and material masters.
- Creation of layouts for the complete system and individual modules for internal coordination.
Prashob P K
Last position:
Sr. QA/QC Engineer at Aries Marine & Engineering Services
- Pressure vessels stage wise inspections (as per ITP or RFI)
- Storage tanks inspections
- Valves, spools, fittings inspections
- Furnace inspection
- Casting and forging inspection
- Burners inspection
- Compressors inspection
- Valve testing, VI, DI and PMI inspection
- Pipe spooling stage wise inspections (as per ITP or RFI)
- Structural steel prefabrication stage wise inspections (as per ITP or RFI)
- Welder qualification witnessing, welding procedure preparation, welder certificate renewal
- Hydro test witnessing, pneumatic test witnessing
- Dimensional inspection, structural alignment and bolt tightening inspection
- Coating condition monitoring services
- Coating pull-off test witnessing and report endorsement as a TPI
- Powder coating inspection on behalf of client
- Blasting and coating inspection with chloride and visual test as per client specification as a TPI
- Galvanizing inspection and report endorsement as a TPI agency
- Material receiving inspection and report submission as a TPI agency
- MTC review and mechanical test witnessing for material identification
- Pre-shipment inspection and load-out inspection at ports
- Stage wise witness and report submission according to ITP as a TPI agency
- Quality audit to subcontractor on behalf of client
- Quality plan and ISO documentation preparation for client
- Project final dossier and manufacturer data report (MDR) review and endorsement as a TPI
Ossama Dreibati
Last position:
FE Simulation and Design at Self-employed
- Design and development of charging inlets for megawatt charging systems
- Development of strategies for applying AI in mechanical engineering
- Concept development of inductive charging systems for autonomous vehicles in industrial environments
- Creating concepts for electronically controlled safety brakes for elevators
- Development of power generators with and without iron cores (output below 1 kV)
- Development of solutions for marking plastic and stainless steel components
- Development of various brackets in compliance with EHEDG guidelines
- Requirement management using JAMA
- Simulation of the strength behavior of wastewater treatment plants
- FE optimization simulation of equipment behavior under vibration loads using ANSYS
- Maintenance of bills of materials and databases
- Development of various opto-mechanical systems
- Distance measurement and safety light curtains
- Rapid prototyping methods like 3D printing, SLS, liquid silicone, STL
- Development of modules and connection techniques for integrating power supply and data management units onto PCBs
- Development of shielding elements for industrial equipment
- Implementation of design solutions for connecting PCBs with plugs or cables
- Development of busbars to meet ESD requirements
- Development of fasteners made of V4A steels with clinching, crimping, and/or riveting options for hygienic requirements
- Development of 2K injection molded parts and compressed elastomers
- Development of cable glands made of V4A stainless steel for hygienic requirements
- Development of devices with optical and electronic modules
- Conducting qualification tests (temperature cycling, leak tightness, climate tests, etc.)
- Conducting process and design FMEA
- Development according to agile processes
- Material-appropriate design for chemical resistance (cleaning and disinfecting agents)
- Optimization of injection molded parts for ultrasonic and laser welding
- Investigation of the influence of marking methods (laser marking, electrolytic marking) on part resistance to chemicals
- Corrosion assessment and investigation of stainless steel parts
- Design of parts for machining from welded semifinished products (V4A stainless steels)
- Development of parts made of metallic materials for wireless power transfer devices (CAD: Creo Parametric)
- Creating drawings and models for clients
- FE analysis of the behavior of elastomer seals including installation (CAE: ANSYS)
- Design and development of glass-to-V4A stainless steel connections according to EHEDG guidelines
- Implementation of design solutions for joining similar and dissimilar materials (adhesive bonding, welding, snap hooks) using CAD: Creo Direct Modeling and SolidWorks
- Equipment design for the pharmaceutical and food industries using FDA-approved materials and according to EHEDG guidelines (CAD: Creo Direct Modeling, SolidWorks)
- FE analysis of the effect of temperature on plastic assemblies (CAE: ANSYS)
- Further development of a tool for FE calculation of additive manufacturing (laser sintering process) (CAE: CalculiX)
- Consulting and services in the field of CAD & CAE engineering
- Further development of FE systems for analyzing component strength and topology optimization
- Further development and implementation of an indicator lamp from electrical, optical and mechanical components for integration into a safety module (CAD: Creo Direct Modeling)
- FE simulation to investigate assembly tightness and optimize seals (CAE: ANSYS)
Anastasia Rutman
Last position:
Participation in the Coaching Center at Wipa GmbH
- Participation in the Coaching Center at Wipa GmbH
Discover over 15,000 top freelancers
Statistics of experts using Pressure Vessel
Aggregated from the professional profiles of matched freelancers.
Experience
32 years
Position duration
1.9 years
Positions per freelancer
20
Top business areas
Project Management, Product Development, Quality Assurance
Top industries
Manufacturing, Automotive, Construction
Certification focus areas
Quality Assurance, Operations, Product Development
Bachelor's degree or higher
75%
Master's degree or higher
50%
Doctorate
17%
Certifications per freelancer
2
Most common languages
German, English, French
Speak two or more languages
94%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using Pressure Vessel
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
What it covers
Pressure vessels are closed containers built to hold gases or liquids under pressure. Companies bring in specialists for new vessel design, rerates, fitness-for-service, and drawing checks for reactors, separators, receivers, and autoclaves.
Standards and codes
- ASME Section VIII design and documentation
- EN 13445 calculations and compliance work
- Material selection, corrosion allowance, and weld details
- Nozzle loads, supports, and fatigue checks
Typical deliverables
Strong professionals produce calculation packages, fabrication drawings, datasheets, inspection plans, and review comments. They also support procurement by clarifying code requirements, vendor documents, and deviations before release.
When companies need help
You usually need outside expertise when a project must move quickly, when in-house staff are busy, or when a design must fit a specific code route. In Germany, this often comes up in chemical, energy, food, and process plants where pressure equipment must be documented clearly.
What good specialists do
Good specialists know the code, but they also understand how vessels are built and inspected. They spot weak points early, such as nozzle reinforcement, supports, head choice, fabrication limits, or service conditions that drive corrosion or cyclic loading.
Working methods
Remote work is often enough for calculations, document review, and code questions. On-site time helps with existing equipment, inspections, tie-ins, and talks with fabrication or QA teams. Clear drawings, load cases, and process data make the work faster and safer.
Frequently asked questions
Not sure where to start with Pressure Vessel? These answers cover the essentials.
A pressure vessel is used to contain fluids at a pressure different from the outside environment. It appears in process plants, energy systems, and equipment such as separators, receivers, reactors, and storage vessels. The exact design depends on the service fluid, temperature, pressure, and inspection needs.
Pressure Vessel work focuses on code compliance, stress under internal or external pressure, and safe fabrication details. General mechanical design may stop at function and fit, while vessel work also needs calculations, weld rules, supports, corrosion allowance, and documentation for review. That is why code knowledge matters so much.
The most common references are Pressure Vessel codes such as ASME Section VIII and EN 13445. Projects may also need client specifications, material standards, welding rules, and local inspection requirements. The right code path depends on the project location, industry, and approval route.
A strong Pressure Vessel specialist usually understands process data, materials, welding, and inspection. Familiarity with pipe loads, finite element checks, fabrication methods, and vendor document review is also useful. Good communication with QA and procurement teams helps keep the package consistent.
Companies often bring in Pressure Vessel expertise when a bid, design review, or vendor package needs quick support. It is also useful when internal specialists are overloaded, when a design needs an independent check, or when a project in Germany must align with local expectations and English-language vendor documents.
Much of Pressure Vessel work can be done remotely, especially calculations, code interpretation, and document review. On-site presence is valuable for site surveys, inspections, and meetings with fabrication or maintenance teams. Many projects use a mix of both.
Look for clear calculations, code traceability, and drawings that match the process and fabrication data. A good Pressure Vessel expert explains assumptions, flags missing inputs early, and keeps documents consistent across datasheets, models, and vendor submissions. Practical experience with reviews and manufacturing constraints is a strong sign.
No. Pressure Vessel work also covers modifications, repairs, rerates, life extension, and checks on existing equipment. Many assignments start with an installed vessel that needs updated documentation, a changed duty, or a new inspection scope.
The average hourly rate of freelancers in Germany who have used Pressure Vessel in their recent projects is 111 €, which corresponds to a daily rate of about 886 € based on an 8-hour working day.
Of the freelancers in Germany who have used Pressure Vessel in their recent projects, 75% hold at least a Bachelor's degree, 50% hold at least a Master's degree, and 17% hold a doctorate.
On average, freelancers in Germany who have used Pressure Vessel in their recent projects have 32 years of professional experience, with a single engagement typically lasting around 1.9 years.
The most common languages among freelancers in Germany who have used Pressure Vessel in their recent projects are German (100%), English (94%), and French (28%).
The most common industries among freelancers in Germany who have used Pressure Vessel in their recent projects are Manufacturing (94%), Automotive (72%), and Construction (67%).
The most common business areas among freelancers in Germany who have used Pressure Vessel in their recent projects are Project Management (83%), Product Development (78%), and Quality Assurance (78%).
Main locations of FRATCH Experts, who have recently used Pressure Vessel
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
