Non-Destructive Testing Experts in Germany
in minutes from over 15,000 CVs with the power of AIHire experts who run ultrasonic testing, radiographic testing, and eddy current inspections, then document flaws, verify welds, and support quality checks across production and maintenance. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used Non-Destructive Testing
Cedric Tiogo
Last position:
B2B Freelance Design Engineer for Special-Purpose Machinery at FEM-Composites GmbH
- Cost estimation for a hydraulic system, taking into account the costs over the entire product life cycle and optimizing the technical specifications.
Markus Gattermann
Last position:
Managing Owner at GEC-Solutions
Interim management, project leadership and technical consulting in mechanical and plant engineering for projects in mechanical engineering with a focus on automotive, e-mobility and series production
- Taking over and stabilizing critical projects in special machine construction and the automotive sector (SMEs, OEM, mechanical engineering, automotive)
- Supporting companies facing project delays, scheduling issues and operational challenges
- Leading engineering and project teams and managing complex project structures
- Optimizing processes in development, production and project execution
- Focus on on-time delivery, efficiency, quality and series readiness
Skills:
- Automotive
- Interim Management
- Mechanical Engineering Project Management
- Special Machinery Construction
- Engineering Management
- Operations Management
- Series Ramp-up
- Production Optimization
- Project Stabilization
- Turnaround Management
- Troubleshooting
- Automotive
- E-Mobility
- CAPEX Projects
- Project Management
- Process Optimization
I take on responsibility as:
- Project Manager
- Engineering Manager
- Operations Manager
- Interim Manager
Industries:
- Automotive
- Mechanical Engineering
- E-Mobility
I take on responsibility at short notice in critical mechanical and plant engineering projects and bring schedules, costs and organization back under control.
Complex projects are part of my daily routine. As a senior mechanical engineering expert, I am used to working in the dynamic automotive environment.
Dieter Bomblat
Last position:
Logistics Project Manager at VetLogOne GmbH
- Planning and construction of an AutoStore to increase space efficiency and avoid new logistics space. Acquisition, costing, and integration for national and international clients in the pharmaceutical sector.
- AutoStore implementation (30,000 bins, 30 robots) – +50% space efficiency, -15% throughput. Reduced staffing needs by 12% through automation.
Dietmar Schmidt
Last position:
Automotive supplier, Bavaria and Saxony
- Commissioning of image processing solutions
- Adjustment and testing of image processing algorithms and communication interfaces of SensoPart and Keyence systems in the production line for electric vehicle batteries
- Expansion and testing of 1D and 2D readers (Siemens MV530)
- Acceptance of camera test technology with the end customer on site
René Surma
Last position:
Project Management at Freelancer
- New construction of a filling plant, two silos, and the connecting lines to production for an international company in the food industry
Deniz Öztürk
Last position:
Owner, Director of Projects at Alfanorm / Integralis
- Developing management strategy for industry-focused, stand-alone Testing, Inspection, and Certification company.
- Developing organizational strategy and planning tactical staffing for more than 150 employees.
- Securing accreditation for management system and related internal auditing processes.
- On behalf of INTERTEK Inc., managed testing inspections and certifications for turnaround project at SOCAR / Petrochemical Plant (20 MM$).
Johannes Pfleger
Last position:
Interim Director Operations at ZKW Elektronik GmbH
- Performed crisis management
- Ensured delivery capability
- Built stabilization base
Prashob P K
Last position:
Sr. QA/QC Engineer at Aries Marine & Engineering Services
- Pressure vessels stage wise inspections (as per ITP or RFI)
- Storage tanks inspections
- Valves, spools, fittings inspections
- Furnace inspection
- Casting and forging inspection
- Burners inspection
- Compressors inspection
- Valve testing, VI, DI and PMI inspection
- Pipe spooling stage wise inspections (as per ITP or RFI)
- Structural steel prefabrication stage wise inspections (as per ITP or RFI)
- Welder qualification witnessing, welding procedure preparation, welder certificate renewal
- Hydro test witnessing, pneumatic test witnessing
- Dimensional inspection, structural alignment and bolt tightening inspection
- Coating condition monitoring services
- Coating pull-off test witnessing and report endorsement as a TPI
- Powder coating inspection on behalf of client
- Blasting and coating inspection with chloride and visual test as per client specification as a TPI
- Galvanizing inspection and report endorsement as a TPI agency
- Material receiving inspection and report submission as a TPI agency
- MTC review and mechanical test witnessing for material identification
- Pre-shipment inspection and load-out inspection at ports
- Stage wise witness and report submission according to ITP as a TPI agency
- Quality audit to subcontractor on behalf of client
- Quality plan and ISO documentation preparation for client
- Project final dossier and manufacturer data report (MDR) review and endorsement as a TPI
Nikhil Biju Joseph
Last position:
Master Thesis Student at Infineon Technologies
- Development of a Virtual Exposure Matrix Using Artificial Intelligence for Lithography Processes in Semiconductor Manufacturing
- Machine Learning (KNIME, Python)
Carola Tesche
Last position:
Editor-in-Chief at Freelance Work
- MEDengineering – Editor-in-Chief for medical technology, focusing on components, electronics and materials for the development and design of medical devices – print and online
- VDI Nachrichten – Editor in the energy section, covering smart meter rollout, energy storage and new materials
- EPP (Electronics Production & Test Technology) – various technical articles on electronics manufacturing
- IKZ Haustechnik – Technical editor
- LPKF – technical articles and technical book proofreading
- Energie & Technik – Editor in the bioenergy, photovoltaics and geothermal section
- Developing company-specific marketing concepts for various companies
- Building corporate identity for startup companies
- Graphic design and copywriting for product brochures and flyers for various companies
- Butter and Salt Tech Marketing – creating and customizing PR concepts for clients
- Research and production of technical articles, company news and product presentations
- Creating whitepapers, interviews and customer-success stories
- Developing and customizing PR concepts for clients
Discover over 15,000 top freelancers
Statistics of experts using Non-Destructive Testing
Aggregated from the professional profiles of matched freelancers.
Experience
23 years
Position duration
3.4 years
Positions per freelancer
9
Top business areas
Operations, Quality Assurance, Product Development
Top industries
Manufacturing, Automotive, Professional Services
Certification focus areas
Quality Assurance, Product Development, Operations
Bachelor's degree or higher
88%
Master's degree or higher
38%
Certifications per freelancer
3
Most common languages
German, English, Spanish
Speak two or more languages
90%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using Non-Destructive Testing
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
What it covers
Non-Destructive Testing checks materials, welds, and components without damaging them. It is used to find cracks, porosity, corrosion, and other defects before they become failures. In Germany, it is common in manufacturing, energy, rail, and industrial maintenance.
Common methods
- Ultrasonic testing for internal flaws and thickness checks
- Radiographic testing for welds, castings, and hidden defects
- Magnetic particle testing for surface and near-surface cracks
- Dye penetrant testing for visible surface discontinuities
- Eddy current testing for conductive parts and fine defects
Where it is used
NDT supports new build, inspection programs, shutdowns, and repair work. It appears in pressure vessels, pipelines, structural steel, aircraft parts, and rotating equipment. Strong experts know how to match the method to the material, geometry, and defect type.
Skills that matter
Good professionals combine inspection knowledge with codes, reporting, and practical judgment. They read procedures, set up equipment, control calibration, and record results clearly. They also know when an indication is relevant and when it is not.
When companies bring in specialists
- A plant needs an external inspection during a shutdown
- A supplier must document weld quality for a client audit
- A project needs a method choice for a complex component
- A site in Germany needs local support with reports and coordination
What strong experts deliver
They bring clean procedures, repeatable findings, and reports that engineers can act on. They work carefully, follow safety rules, and keep traceable records. The best specialists make inspection results easy to trust and easy to use.
Frequently asked questions
What clients ask us most about Non-Destructive Testing — answered in short.
Non-Destructive Testing is used to check whether a part is sound without cutting it open or damaging it. Companies rely on it for weld inspection, flaw detection, corrosion checks, and acceptance testing on critical parts. It is common wherever failure would be expensive or unsafe.
NDT checks the same kinds of defects without destroying the sample, while destructive testing proves strength by breaking or deforming it. That makes NDT the better choice for installed equipment, finished parts, and ongoing inspection programs. Destructive testing still matters for qualification and lab work, but it answers a different question.
The most common Non-Destructive Testing methods are ultrasonic testing, radiographic testing, magnetic particle testing, dye penetrant testing, and eddy current testing. The right method depends on the material, thickness, access, and the defect you want to find. Strong specialists can explain why one method fits better than another.
A good NDT specialist usually also understands welding, materials, inspection codes, and report writing. Familiarity with calibration, safety rules, and quality systems is important too. For complex sites, the ability to coordinate with production, maintenance, and quality teams matters as much as the inspection itself.
Non-Destructive Testing tasks range from straightforward inspections to highly regulated assessments. Simple support work may need a method-savvy professional with solid field experience, while critical assets need someone who knows the code, the component type, and the failure mode. For pressure equipment, pipelines, and aerospace work, choose someone with relevant project history.
NDT itself is usually on-site because the inspection happens on the asset. Remote collaboration still helps with procedure review, data interpretation, report checking, and planning inspections before a shutdown or release. In Germany, many companies mix on-site field work with remote document and quality support.
A strong Non-Destructive Testing professional gives clear procedures, correct setup, traceable records, and findings that match the asset and the standard. Look for careful communication, good documentation, and the ability to explain why an indication matters. Quality shows up in consistency, not just in finding defects.
A NDT assignment can involve tight procedures, access limits, safety rules, and strict reporting. Freelancers should be ready to follow site rules, document results carefully, and work with engineers who depend on accurate findings. If you can handle the method, the paperwork, and the communication, you will fit well into most projects.
The average hourly rate of freelancers in Germany who have used Non-Destructive Testing in their recent projects is 94 €, which corresponds to a daily rate of about 755 € based on an 8-hour working day.
Of the freelancers in Germany who have used Non-Destructive Testing in their recent projects, 88% hold at least a Bachelor's degree and 38% hold at least a Master's degree.
On average, freelancers in Germany who have used Non-Destructive Testing in their recent projects have 23 years of professional experience, with a single engagement typically lasting around 3.4 years.
The most common languages among freelancers in Germany who have used Non-Destructive Testing in their recent projects are German (100%), English (90%), and Spanish (40%).
The most common industries among freelancers in Germany who have used Non-Destructive Testing in their recent projects are Manufacturing (90%), Automotive (50%), and Professional Services (50%).
The most common business areas among freelancers in Germany who have used Non-Destructive Testing in their recent projects are Operations (90%), Quality Assurance (90%), and Product Development (80%).
Main locations of FRATCH Experts, who have recently used Non-Destructive Testing
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
