Test Engineers in Germany
matched in minutes from 15,000 CVs with the power of AIBring in specialists for test automation, regression testing, API validation, and release readiness across web apps, mobile products, and enterprise systems. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Test Engineers in Germany
Muhammad Tanveer Baig
Last position:
Embedded Systems Consultant / Architect | Integration and Validation Engineer / Manager at Ingenieurbüro Baig
Led the hardware development and validation of a safety-critical 400 V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in line with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-border EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.
Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) reprocessing, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.
End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field of view limits, and thermal and voltage-related ECU state machines. Used a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.
Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.
Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.
Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurement data. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.
Successfully managed complete engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept through system integration and validation to technical documentation, supplier coordination, and user training.
Karlheinz Götz
Last position:
Consultant / Test Analyst / Supporter at Insurance office, Spaichingen
Project: Process optimization & IT support in an insurance broker office.
Project activities:
- Analysis of processes and definition of requirements
- Consulting for the implementation of a cloud solution (soho)
- Installation and verification of new infrastructure HW
- Cloud installation & configuration
- Definition and creation of use cases
- Performing user acceptance tests (UAT)
- User training / training
- IT support (cloud, PC, server, printer, network)
Label: Insurance, infrastructure, configuration, training, support
Basavaraj Chikkanagoudar
Last position:
ASIC Verification Engineer at Ogheri Consulting GmbH
- Built and configured a highly parameterized UVM environment to validate AMBA APB subsystem.
- Developed virtual sequencers to drive synchronized, parallel master-slave sequences ensuring accurate peripheral address decoding and protocol handshake.
- Methodologies: UVM, Constrained Random Verification
- Tools: Cadence Xcelium, SimVision
René Adam
Last position:
Test (Automation) Engineer at BWI GmbH
Introduced a unified test strategy to establish quality gates and define test activities for the 'ICaruS' subproject of the Bundeswehr
Built and implemented manual and automated tests, set up the test infrastructure, and introduced test management tools
Established KPIs and dashboards to present and distribute test metrics to project team members and stakeholders
Technologies used: Playwright, TypeScript, REST, PEGA Systems, Jira, HP ALM, GitLab Runner, Kubernetes, Git, VS Code, Angular, Scrum
Thorsten Matzner
Last position:
Odoo Implementer at N.N.
As project manager for the Odoo implementation at a small company, I was responsible for designing, implementing, and training a fully integrated CRM and accounting system. Through structured requirements analysis, precise data migration, and targeted change management, I was able to complete the rollout in just eight weeks. The project led to a significant reduction in manual tasks, faster business processes, and increased real-time transparency.
Main Responsibilities
Requirements analysis and process mapping Configuration of Odoo modules: CRM, Sales, and Accounting Data migration (Excel/CSV → Odoo) and quality control Creation of workflows, automated email rules, and dashboards Conducting training sessions and providing support after go-live Project coordination (budget, schedule, stakeholder communication)
Key Achievements
Full implementation of the Odoo suite within the set timeframe (8 weeks) 30% reduction in accounting time and 25% acceleration of the lead-to-sale flow 100% customer satisfaction after go-live, based on survey results Successful migration of 100% of existing master data without data loss Establishment of a sustainable support infrastructure (3-month post go-live support)
Impact
Improved decision-making through real-time dashboards and automated reports Increased efficiency and cost savings (≈ €8,000/month) Scalability for future growth (additional modules can be integrated seamlessly) Strengthened sales and finance departments through seamless process integration
This summary highlights how I created concrete and measurable value for the company through structured project work, technical expertise, and targeted training.
Pierre-Jean Albertini-Fujii
Last position:
Verification Engineer – Aviation at Tri.Merge GmbH
- Automated Python-based analysis of test script repositories
- Built a SQLite database for signal and value tracking
- Identified critical discrepancies with ad-hoc SQL queries
- Technologies: Python, SQLite, Excel/ODBC
Mariam Amr Zayed
Last position:
Software Test Engineer at Sonnen Egypt
Carsten Büche
Last position:
Test engineer at DAT (Deutsche Automobil Treuhand GmbH)
- Conducted manual testing for claims creation, forwarding, repair cost calculation, parts selection and logging on the Gold.dat.de platform
- Automated key processes using ASKUI, including login, claim creation, calculations and parts selection
- Simulated user interactions (e.g., drag-and-drop) with ASKUI
- Integrated automated tests into CI/CD pipelines for early error detection
- Executed over 50 test scenarios and identified critical defects
- Reduced test time by 50% through automation
- Improved platform quality and user experience
Serge Patrick Tchuente
Last position:
Senior Test Engineer at Voith Group
- Software tests for control functions in e-mobility vehicles
- Development of software tests for complex system and component functions for control and regulation in commercial vehicles with electric mobility
- Analysis of software specifications and creation of test specifications for system and component function tests
- Further development and maintenance of test tools
- Carrying out manual and/or automated tests based on the test specifications
- Review of test specifications and participation in reviews of software specifications
- Tools: Vector CANalyzer, SIEMENS Polarion
Mangal Mahalinge
Last position:
Trainee Product Management at Digitale Leute Schule
- Remote learning with experts and 636 instructional units.
- Product management bootcamp teaching agile methods and software tools for modern product management in complex software projects.
- User experience (UX) · product management · Figma (software) · user-centered design · Scrum · agile project management · Jira · Confluence · product discovery · backlog management · user experience design (UED) · prototyping · lean thinking · product roadmapping · user stories · Miro collaboration platform · application monitoring tools · performance metrics · lean product management · product design kickoff indicators (KPI) & tracking events · product strategy · business modeling · product vision & goals · product discovery.
Fitim Karimani
Last position:
Specialist Development and Testing at Dräxlmaier Group
- Lead engineering of international test teams
- Test management and planning on ASPICE according to ISTQB standard
- Requirements engineering according to ASPICE SYS.1 & SYS.2
- Ensuring fulfillment of functional safety according to ISO 26262
- Defect management and analysis
- Solution finding of issues in core teams of system, hardware and software level
Mario Drmic
Last position:
Senior Test Engineer at Webasto SE
- Testing control units in the automotive roof systems area (ECU system test)
- Creating and maintaining test specifications for system and integration tests
- Planning and implementing automated tests including documentation of results
- Performing LIN conformance tests and cyber security tests
- Analyzing and evaluating software and hardware issues and coordinating with development teams
- Developing test strategies and test plans to ensure test coverage
Hayat Bouknine
Last position:
Qualification & Validation Engineer – Equipment and Utilities at SOPHARTEX
- Executed IQ/OQ/PQ for equipment and technical utility systems (HVAC, purified water, compressed air, clean steam).
- Managed and closed audit deviations and CAPA.
- Performed and tracked risk analyses (FMEA, criticality).
- Updated procedures and validation plans.
- Coordinated across departments and participated in audits.
Anicet Ngonthe
Last position:
Senior Test Specialist at RWE Supply & Trading
- Created a test strategy for manual testing and test automation
- Automated regression and end-to-end API test cases
- Performed functional testing on the Curvecraft portal
- Documented manual test procedures
- Planned and executed end-to-end and regression tests
- Test case design, test case creation, development of test scenarios
- Analyzed test results, logged defects, and retested fixes
- IT environment: Open API, C#, RestSharp, Azure, Azure DevOps, Visual Studio, NSwag, PostgreSQL, Azure Test Plan
Alexandra Blaj
Last position:
System Test Engineer at Magna Electronics
- Requirements analysis
- Requirements coverage review
- Test specification and test case creation
- Test automation and manual testing
- Functional testing
- Environmental testing (climatic chamber tests)
- Stress testing and regression testing
- HiL and black-box testing
- Test bench setup
- Test reporting and bug reporting
- Diagnostics testing based on ISO 14229
- System base functions testing including KPIs
- End-of-line testing of first produced ECU samples
- Supported automated testing through CI/CD processes
Discover over 15,000 top freelancers
Test Engineers statistics
Aggregated from the professional profiles of matched freelancers.
Experience
16 years
Position duration
2 years
Positions per freelancer
11
Top business areas
Quality Assurance, Product Development, Information Technology
Top industries
Information Technology, Manufacturing, Automotive
Certification focus areas
Quality Assurance, Information Technology, Project Management
Bachelor's degree or higher
100%
Master's degree or higher
41%
Certifications per freelancer
3
Most common languages
German, English, French
Speak two or more languages
95%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this role in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates for Test Engineers in Germany
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the role
Test scope
A Test Engineer checks whether software behaves as intended before it reaches users. The work covers manual testing, test automation, and the design of clear test cases. In many teams, the role overlaps with QA Engineer or software tester, but the focus stays on verification, defect discovery, and release confidence.
Typical deliverables
- Test plans and test cases tied to user stories and acceptance criteria
- Automated checks for regression, smoke, and integration flows
- Defect reports with reproducible steps and clear severity
- Test evidence for releases, audits, and handover to development teams
- Risk-based test coverage for features, fixes, and system changes
Core skills
A strong Test Engineer understands how applications fail and how to prove that they work. They think in edge cases, trace data flows, and turn business rules into reliable test scenarios. Common tools include Jira, TestRail, Selenium, Cypress, Playwright, Postman, and CI pipelines in GitHub Actions, GitLab CI, or Jenkins.
When companies hire
Freelance support is useful when a release needs an independent check, when automation lags behind development, or when a team lacks testing capacity during a busy project phase. Companies also bring in test specialists for migrations, ERP changes, API-heavy builds, and product launches. In Germany, this is common in manufacturing, finance, insurance, logistics, and B2B software teams that need structured quality work and clear documentation.
What good looks like
A strong tester does more than find bugs. They ask the right questions early, spot missing acceptance criteria, and make test results easy to trust.
- Clear communication with developers, product owners, and project managers
- Solid understanding of risk, coverage, and release impact
- Practical experience with manual and automated testing
- Careful documentation and disciplined follow-up on defects
- Ability to work remotely or on-site when a project needs close coordination
Specializations
Not every project needs the same profile. Some teams need a test automation engineer who can build stable suites for web or mobile apps. Others need a QA Engineer for exploratory testing, UAT support, API checks, or SAP and enterprise system validation. The best freelance specialists adapt their approach to the product, the stack, and the release pressure without slowing the team down.
Frequently asked questions
The facts hiring teams ask for most often when it comes to Test Engineers.
A Test Engineer plans, runs, and documents tests for software releases, new features, and fixes. The job usually includes manual checks, test automation, defect reporting, and support for release decisions. In practice, the freelancer helps the team confirm that critical flows work before users see them.
Freelance support makes sense when you need help for a specific release, a migration, or a short period of test-heavy work. It is also useful if your team needs extra capacity or a specialist in automation, API testing, or system integration. A freelancer can start quickly and focus on delivery instead of long internal onboarding.
A strong Test Engineer understands test design, defect analysis, and release risk. They should be comfortable with test management tools, bug tracking, and at least one automation stack, depending on the project. Good communication matters just as much, because test results need to be clear for developers and product teams.
These titles often overlap, and in many teams they describe similar work. A Test Engineer usually focuses more on structured verification, automation, and technical test execution, while a QA Engineer may also cover quality processes and team standards. A software tester is often used as a broader term for the same kind of work.
Ask for test cases, test plans, automated regression suites, defect reports, and a clear summary of risks before release. For technical projects, ask for API test coverage, CI pipeline checks, and evidence of what was tested. Good deliverables are easy to review and tied to business-critical flows.
Both can work well. Remote collaboration fits automation, documentation, test review, and most bug verification tasks, while on-site time can help during workshops, UAT, or complex release periods. For teams in Germany, a mix is common when the product team, developers, and testers need close coordination.
Look for clear examples of how the Test Engineer found hard-to-spot issues, improved coverage, or reduced release risk. Strong candidates explain how they choose test cases, how they handle flaky automation, and how they report results. You want someone who is precise, calm under pressure, and disciplined in follow-up.
That depends on the stack, but common tools include Jira, TestRail, Selenium, Cypress, Playwright, Postman, and CI systems such as Jenkins or GitLab CI. For enterprise work, you may also need experience with SAP or complex integration environments. The best freelancer chooses tools that fit the product instead of forcing a fixed method.
The average hourly rate for Test Engineers in Germany is 83 €, which corresponds to a daily rate of about 665 € based on an 8-hour working day.
Of the freelancers working as Test Engineers in Germany, 100% hold at least a Bachelor's degree and 41% hold at least a Master's degree.
On average, freelancers working as Test Engineers in Germany have 16 years of professional experience, with a single engagement typically lasting around 2 years.
The most common languages among freelancers working as Test Engineers in Germany are German (100%), English (95%), and French (25%).
The most common industries among freelancers working as Test Engineers in Germany are Information Technology (60%), Manufacturing (60%), and Automotive (55%).
The most common business areas among freelancers working as Test Engineers in Germany are Quality Assurance (100%), Product Development (80%), and Information Technology (75%).
FRATCH Test Engineers main locations
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
