Experience
Sr. QA/QC Engineer
Aries Marine & Engineering Services
- Pressure vessels stage wise inspections (as per ITP or RFI)
- Storage tanks inspections
- Valves, spools, fittings inspections
- Furnace inspection
- Casting and forging inspection
- Burners inspection
- Compressors inspection
- Valve testing, VI, DI and PMI inspection
- Pipe spooling stage wise inspections (as per ITP or RFI)
- Structural steel prefabrication stage wise inspections (as per ITP or RFI)
- Welder qualification witnessing, welding procedure preparation, welder certificate renewal
- Hydro test witnessing, pneumatic test witnessing
- Dimensional inspection, structural alignment and bolt tightening inspection
- Coating condition monitoring services
- Coating pull-off test witnessing and report endorsement as a TPI
- Powder coating inspection on behalf of client
- Blasting and coating inspection with chloride and visual test as per client specification as a TPI
- Galvanizing inspection and report endorsement as a TPI agency
- Material receiving inspection and report submission as a TPI agency
- MTC review and mechanical test witnessing for material identification
- Pre-shipment inspection and load-out inspection at ports
- Stage wise witness and report submission according to ITP as a TPI agency
- Quality audit to subcontractor on behalf of client
- Quality plan and ISO documentation preparation for client
- Project final dossier and manufacturer data report (MDR) review and endorsement as a TPI
QA/QC Inspector
Kamal Engineering
- Material receiving inspection
- Structural and piping fabrication inspection, erection and piping pre-commissioning activities
- Monitor, review and implement QA/QC procedures as per client requirements
- Verify delivery condition of steels as per purchase order and mill test certificates to ensure compliance with codes and client specifications
- Assess material usability or disposition based on observations, comments and recommendations
- Check material traceability and transit damages against packing list and delivery note for free issue materials
- Raise NCRs for nonconforming materials
- Coordinate with inspectors and TPI/class for receipt inspections and test witnessing
- Perform dimensional, visual and certificate review of incoming materials like filler wires and electrodes
- Prepare and review material receiving inspection reports (MRIR) and overage, shortage and damage reports
- Review scope of work, specifications and related codes and standards of awarded projects
- Assign inspection and NDT activities to subordinates and manage NDT technicians
- Interpret AFC drawings, codes, standards and specifications for acceptance or rejection
- Educate, train and conduct awareness sessions for production team on project quality and error prevention
- Collate and report quality statistics of project activities including defect rates
- Represent QC in project meetings and update status daily and weekly
- Coordinate quality activities with clients, contractors and TPI
- Maintain office ethics among QC staff
- Ensure inspection activities follow approved ITP and reports are documented timely
- Conduct and witness PQR and WQT tests for welders
- Check welding parameters before, during and after welding for SAW, SMAW, GTAW and FCAW
- Verify calibration of welding machines and tools including baking and holding ovens
- Perform visual and dimensional inspections as per WPS requirements
- Arrange and witness NDT of weld joints and maintain reports
- Interpret radiographic films and review reports
- Prepare requests and reports for welding activities including fit-up, weld visual and dimensional inspection, repair rate, weekly and summary weld reports, weld tracking, PMI, hardness and PWHT reports
- Conduct and witness hydro tests as per client requirements
- Monitor production activities for continuous quality improvement
- Raise inspection checklists as per daily activity
- Establish, implement and maintain quality systems in accordance with client and industry codes, standards and specifications
- Prepare welding documents for hydro test packages including summary, NDT, RTFI reports, checklists and weld maps
- Initiate actions to prevent nonconformities in fabrication, welding and quality systems
- Document quality records and maintain calibration certificates, personnel certifications and batch test certificates for consumables
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Manufacturing and Construction.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Quality Assurance, Operations, and Production.
Frequently asked questions
Have questions? Find more information here.
Prashob is based in Magdeburg, Germany.
Prashob speaks the following languages: English (Advanced), Hindi (Advanced), Malayalam (Advanced), Tamil (Advanced), German (Elementary).
Prashob has at least 11 years of experience. During this time, Prashob has worked in at least 2 different roles and for 2 different companies. The average length of individual experience is 6 years and 7 months. Note that Prashob may not have shared all experience and actually has more experience.
Based on recent experience, Prashob would be well-suited for roles such as: Sr. QA/QC Engineer, QA/QC Inspector.
Prashob's most recent position is Sr. QA/QC Engineer at Aries Marine & Engineering Services.
In recent years, Prashob has worked for Aries Marine & Engineering Services.
Prashob is most experienced in industries like Manufacturing and Construction.
Prashob is most experienced in business areas like Quality Assurance, Operations, and Production.
Prashob has recently worked in industries like Manufacturing.
Prashob has recently worked in business areas like Quality Assurance.
Prashob holds a Bachelor in MECHANICAL ENGINEERING from University of Kannur.
Prashob has 6 certificates. Among them, these include: ASNT NDE certification level-II in MPI, PT, RT and UT, CSWIP 3.1 LEVEL 2 Certified, and Certified Professional AutoCAD 2012.
The availability of Prashob needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Dr Ing Over D.
Last position:
Pipeline Construction Manager at ILF
ETL 180 - Construction of 90 Km gas pipeline between Hamburg and Bremen. Supervision of welding, pipe lowering, coating, bending work and pressure testing. Quality assurance. Steel pipe with a diameter of 1,4 m and a wall thickness of 21mm.
Klaus-Dieter B.
Last position:
Site Manager Lithium-Ion Battery at Porsche
- Independently managing the construction of global projects for lithium-ion coating lines
- Leading and coordinating international installation teams and subcontractors
- Ensuring compliance with contractually agreed installation and commissioning milestones
- Ensuring timely completion of outstanding items on site
- Regularly communicating with the project manager about current project status
- Leading daily internal site meetings and attending construction meetings with suppliers and customers
- Documenting processes and progress in weekly reports
- Responsible for occupational safety and health protection on site
Fahd K.
Last position:
PMO & Industrialization Strategy Consultant at Confidential Consulting
- Built the business plan, feasibility study, and full industrialization strategy for a greenfield gigafactory
- Modelled CAPEX/OPEX, industrial layout, equipment strategy, and operational ramp scenarios
- Defined PMO governance and the complete commissioning and quality strategy from design through operations
- Managed client relationship and provided strategic advisory on regulatory pathways and technology selection
Sanda T.
Last position:
Quality Engineer at AKKODIS (client: AIRBUS - Work package project)
- Strong understanding of Qualification process and aerospace standards (ABD0100, RTCA DO160, JAR 25)
- Successfully managed supplier progress reviews and product conformity in accordance with aerospace standards including ABD0100, RTCA DO160, and JAR 25
- Led product non-conformance containment and disposition activities across external supply chains, ensuring compliance quality standards for high-lift and hydraulic systems
- Led product non-conformance management (NCR) and applied APQP, FMEA, and 8D problem-solving (CAPA) in coordination with suppliers and OEMs, achieving a 15% reduction in process cycle time
- monitored production project KPIs (quality, timeliness, customer satisfaction) and implemented continuous improvement initiatives using Lean Six Sigma techniques
- Maintained and expanded certification scope for ISO 9001, ISO 14001, ISO 27001, ensuring alignment with both regulatory and customer-specific quality requirements
- Supported the configuration management and change control process, including MODs, MPs, TRS, SBs, and validated changes as part of certification and verification deliverables
- Authored and reviewed technical documentation (e.g., SDD, SRD, SID, PTS, V&V Summary, System Design Modification Plan, Flight Test Requests, Technical Notes), ensuring engineering definition compliance and traceability
- Engaged in product safety reviews and risk-based disposition decision-making processes, contributing to proactive quality assurance across the value stream
Nikhil B.
Last position:
Master Thesis Student at Infineon Technologies
- Development of a Virtual Exposure Matrix Using Artificial Intelligence for Lithography Processes in Semiconductor Manufacturing
- Machine Learning (KNIME, Python)
Martin S.
Last position:
QA/QC support for accelerator facility assembly at FAIR GmbH
Background Construction of the Super-FRS, a research facility over 200 meters long for the separation of atomic nuclei. Quality tasks had largely been delegated to work package owners, work package leaders, assembly leads and production planning; the required quality expertise and coordinated implementation needed further development.
Responsibility Responsible for Quality Control from incoming goods through NCR and problem-solving management to quality handover for Commissioning. Further developed the quality skills of operational leads; coordinated closely with GSI quality colleagues for development and Supply Chain Management.
Actions Defined quality milestones, inspection requirements and inspection procedures with the responsible functions and supported their implementation. Managed deviations at component and assembly interfaces that only became apparent during installation through NCR and problem-solving management; coordinated and followed up on technical clarification, corrective actions and verifiable quality records.
Result Strengthened quality expertise and independent quality practices within operational functions; established clear inspection requirements and NCR procedures. Ensured quality-assured assembly within the project scope and helped shape the quality culture. Assignment expected to end early in October/November 2026 as part of project-wide budget consolidation.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a Sr. QA/QC Engineer
Nearby freelancers
Professionals working in or nearby Magdeburg, Germany

