Jerzy B.-Freelance Quality Engineer
Check rate
Experience
Freelance Quality Engineer
Siemens Mobility
- Independently handled quality issues on the customer and supplier side, including documentation and follow-up on corrective actions
- Advised on tracking component delivery dates through to arrival at the client’s plant
- Structured logistics processes and sourced raw materials
- Developed suppliers in Poland
Freelance Quality Engineer
Katek Elektronik Memmingen GmbH
- Advanced Product Quality Planning (APQP)
- Sample approval processes (PPAP)
- Handling complaints
- Supplier support
Freelance Quality Engineer
Stalmech
- Advanced Product Quality Planning (APQP)
- Sample approval processes (PPAP)
- Process optimization
Freelance Quality Engineer
Knipping Kunststofftechnik
- Independently handled quality issues on the customer and supplier side, including documentation and follow-up on corrective actions
- Reported on current quality issues
- Conducted product audits (VDA 6.5)
- Created and updated quality management documentation (work instructions, inspection instructions, customer-specific documents)
Process Analysis and System Audit VDA 6.3, Quality Assurance (Freelancer)
Jungheinrich
- Supported the plant manager in quality assurance
Supplier Development
Freelancer
- Certificate of Inspection 3.1
- Quality improvement and advanced quality planning
- Training employees in quality
Logistics and Quality Manager (Freelancer)
IFAO Ismaning
- Relocation of a plant from Germany to Slovakia (Hörmann Automotive Penzberg)
- Interim management of quality assurance at the plant in Slovakia
- Logistics and quality improvement in Slovakia
- Quality improvement using quality management methods (FMEA, KVP, Pareto, 8D, 5M, APQP)
- Supplier development in Poland, with a focus on quality assurance
Quality Engineer
Service Provider
Process improvement and standardization of machines for production on multiple machines
Staff selection (staff matrix)
Quality improvement using quality management methods (FMEA, KVP, Pareto, 8D, 5M, APQP)
Preparation of inspection plans (status, quantity, dimensions, parameters)
Preparation and monitoring of action plans
Supplier selection (Maturity Evaluation, SCR, Sourcing)
Initial sample inspections, support during the launch phase, and complaint management for Daimler, VW, Audi (Saint-Gobain)
Conducting supplier audits
Intervention and escalation management
Logistics planning and production control
VDA 6.3 audit
Fault analysis of Al die-cast parts (e.g. gearbox covers) and Al low-pressure cast parts (e.g. rear axle)
Analysis of production processes and potential for defect prevention (porosity)
Capacity analysis and optimization of mechanical machining of Al cast parts
Process improvement for bending and hardening components (e.g. stabilizers)
Optimization of welded parts
Optimization of plastic injection molding processes and tool geometries
Contributing to tool design and construction
Production areas: injection molding and plastic overmolding of Al tubes for VW
Inspection and validation of plastic and granulate production according to customer requirements (MFI, Charpy, heat resistance, flame retardancy, color)
Validation of component feed mixing and extrusion
Projects for customers such as Saint-Gobain, Bausch in Bagnang (VW), Saargummi (Daimler), Kovolit Brno (VW), Faurecia Kosice (Daimler), Brose, Continental (SQM ADAS)
BMW: Analysis of defect prevention for cracks in Al low-pressure cast parts, review and comparison of HBW, PLP, FMEA, data analysis and sample evaluation
Porsche AG: Process and quality improvement at suppliers (bumper assembly)
Volkswagen AG: Process and quality improvement at suppliers, process control during development, optimization of mechanical machining of Al cast parts, fault analysis of Al low-pressure casting, quality improvement of plastic parts, initial sample inspection (BEON)
Mahle AG: Production relocation from Vaihingen to Poland (plastic parts, Fa. Burkhard)
Deutz AG: Production relocation from Mühlacker to Bulgaria (coolant and fuel lines, Fa. Sihn)
Streetscooter Aachen: Prototype construction of electric vans (parts responsibility)
Quality Engineer
Freelance Quality Engineer
- Supplier and complaint management using 8D reporting and advanced quality planning (APQP, FMEA)
- Standardization and qualification of add-on parts for vehicle development (grab handles, sun visors, connectors, trim) including prototype integration
- Supplier and material qualification for prototype parts
- Cost reduction and increased capacity through standardized materials
- Support during the Golf, Sharan, Phaeton prototype phases (supplier selection, production planning) for VW
- Approval of initial sample inspections and process control for Daimler (plastic parts, exterior)
Quality Engineer
Quality Engineering Service Provider
- Supplier management
- Approval of initial sample inspections
- Advanced quality planning
- Internal audits
- Production planning
- Complaint handling
Logistics Operations Manager
Rhenus Contrac
- Managed and monitored production processes for bumpers and bumper assembly
- Created and updated work instructions
- Monitored quality requirements
- Initiated and checked maintenance work
- Monitored equipment
- Procured tools and consumables
- Managed around 100 blue-collar employees, including shift scheduling
Production Manager, Production Logistics
On Line GmbH
- Bumper assembly at the Ford customer center of Dynamit Nobel
- Documented and classified defects
- Planned material requirements
- Recruited and managed temporary staff
- Responsible for around 100 employees
Self-employed Sales Partner
Fa. Eismann
Laboratory Employee
A. Schulmann GmbH
- Standardized granules (PA 6, PA 66) for Bosch and BMW
- Monitored operations and produced samples
- Monitored ongoing production
- Measured technical values
- Matched colors
- Approved production
Shift Supervisor
Philips Licht GmbH
- Supervised around 20 employees and assigned work
- Set up machines (polyester presses, thermoplastic and polyester injection molding machines, blow molding machines)
- Monitored production
Machine Fitter
Daimon-Duracell GmbH
- Repair, adjustment and operation of welding machines
Designer
Papierindustrie
Assistant Designer
Schienenfahrzeugen
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Manufacturing, Automotive, Transportation, and Food and Beverage.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Quality Assurance, Production, Supply Chain Management, Operations, Product Development, and Logistics.
Summary
I have extensive experience as a freelance quality engineer, driving quality improvements and process optimizations across various industries. I focus on handling quality issues from documentation to follow-up, developing suppliers and streamlining processes. My work has often involved quality planning, audit management, and ensuring product and process standards through methods like APQP, FMEA, and 8D.
I am passionate about enhancing efficiency through practical methods and clear communication. I bring years of hands-on expertise in quality assurance, supplier development, logistic coordination, and team training to deliver measurable improvements and reliable results.
Skills
- Extensive, Long-Standing Expertise In Quality Management And Quality Assurance
- Very Good Expertise In Common Quality Tools, E.G. Fmea, Apqp, Ppap, 8d Report, And More
- Very Good Expertise In Failure Analysis And Problem-Solving (Ishikawa, 5 Why)
- Very Good Knowledge Of Quality Standards Qs-9001 / Iatf 16949
- Very Good Expertise In Supplier Development And Auditing
- Process Optimization
- Vda 2 Sample Approvals (Vw Beon)
- Vda 6.3 Audit
Languages
Education
Technische Hochschule in Posen
Rail vehicle engineering · Poznań, Poland
Eisenbahntechnikum in Posen
Transport Engineering Technician · Transport engineering · Poznań, Poland
Certifications & licenses
Abnahmeprüfzeugniss 3.1
Fachkraft für Materialprüfung
Statistics
Experience
Global experience
Expertise
Qualifications
Frequently asked questions
Have questions? Find more information here.
Jerzy speaks the following languages: Polish (Native), German (Advanced), Slovak (Advanced), English (Intermediate).
Jerzy has at least 49 years of experience. During this time, Jerzy has worked in at least 13 different roles and for 18 different companies. The average length of individual experience is 3 years and 9 months. Note that Jerzy may not have shared all experience and actually has more experience.
Based on recent experience, Jerzy would be well-suited for roles such as: Freelance Quality Engineer, Process Analysis and System Audit VDA 6.3, Quality Assurance (Freelancer), Supplier Development.
Jerzy's most recent position is Freelance Quality Engineer at Siemens Mobility.
In recent years, Jerzy has worked for Siemens Mobility, Katek Elektronik Memmingen GmbH, Stalmech, Knipping Kunststofftechnik, and Jungheinrich.
Jerzy is most experienced in industries like Manufacturing, Automotive, and Transportation. Jerzy also has some experience in Food and Beverage.
Jerzy is most experienced in business areas like Quality Assurance, Production, and Supply Chain Management. Jerzy also has some experience in Operations, Product Development, and Logistics.
Jerzy has recently worked in industries like Manufacturing and Automotive.
Jerzy has recently worked in business areas like Quality Assurance, Supply Chain Management, and Logistics.
Jerzy attended Technische Hochschule in Posen for Rail vehicle engineering.
Jerzy has 2 certificates. These include: Abnahmeprüfzeugniss 3.1 and Fachkraft für Materialprüfung.
Jerzy is immediately available full-time for suitable projects.
Similar freelancers
Discover other experts with similar qualifications and experience
Andreas R.
Gerd G.
Klaus-Dieter B.
Mohsen D.
Martin S.
Joseph A.
Ümit D.
Robert O.
Mirko H.
Marcel M.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a Freelance Quality Engineer
Sven M.
Ali C.
Rainer M.
Hans S.
Marcin L.
Jean S.
Dirk K.
Philip S.
Johannes F.
Roger B.
