Piping Design Experts in Germany
matched in minutes from vetted, available specialists with the power of AI.Work with experts who design plant piping layouts, route process and utility lines, and deliver clean isometrics, material take-offs, and CAD-ready documentation. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used Piping Design
Thomas Peter
Last position:
Lifting Device Designer at TP-Produktdesign
- Design of a 3-point quick coupling for tractor lifting attachment
- Development of a bracket for a tow flange device
Over Díaz
Last position:
Senior Quality Manager at Denys GmbH
- Responsible for quality assurance (QA/QC), as-built documentation and audit planning
- Coordinating inspection of open trench and trenchless construction work (HDD, microtunneling)
- Quality control of HDPE pipe welding, conducting quality tests, pigging, pipe calibration and leak testing (pipe diameters 50–500 mm)
- Ensuring compliance with highest safety, environmental and quality standards
Hans-Jürgen Becker
Last position:
Freelance Technician at FlexLink Systems GmbH
- Plant design in conveyor technology
- Engineering and design of conveyors for the automotive industry / battery transport
- Execution, CAD: AutoCAD Inventor 2019 3D + Vault
Andrés Guevara Kluxen
Last position:
Freelancer at ALGK-BAUPRO
- Scope of work [link]
Hans-Werner Mahlke
Last position:
Project Management Green Steel at Saar Stahl
- Conversion of furnace heating from coke gas to natural gas and subsequent changeover to a natural gas/hydrogen blend
- Utility supply and piping work (compressed air, cooling water, gas supply, electrical installation)
- Procurement and negotiations with suppliers
- Reporting to management
- Creation of layouts and project plans in MS Project
- Budget planning and monitoring
- Creation of various requirement and specification documents
- Topics: steel production, blast furnace, rolling mill, gas burner, hydrogen
Volkmar Schulze
Last position:
Commissioning Coordinator Marine HVAC Systems at Meyer Wismar Sárl
- Coordination of upstream and downstream departments and background teams (UAN)
- Coordination with the shipyard and the schedule, identifying deviations and cross-functional response to plan deviations
- Rescheduling workflows and staff assignments to drive prioritized goals forward
- Independently implementing solutions on board the ship
- Checking compliance with occupational safety rules, especially PTW procedures for electrical work
Ricardo Calvache
Last position:
Engineering Freelancer / Plant Design Project Engineer at Dipl. Ing. SCHERZER GmbH
- Planning and design of plants using AutoCAD Plant 3D, Inventor, Advance Steel, Navisworks
- Review of planning documents such as concepts and design reports, R&ID
- Processing and creation of pipe classes
- Creation and development of piping routes in 3D plant models
- Creation of isometrics of piping systems and special supports
- Coordination of involved trade specialists, foundation planning
- Consulting in project development and execution of projects in plant engineering, chemical engineering, and refinery construction
- Coordination with suppliers for basic engineering and tender preparation
- Management of all relevant engineering activities to create a technical concept (scope definition)
Ralf Hirsch
Last position:
HSE Manager at Hitachi Energy
- New build of a converter station in Nortorf/Wilster for Tennet.
- Supervision and coordination of the companies involved in the project.
- Advice and support for the commissioning project management on all occupational and fire safety issues.
- Instruction of companies and their employees about the project specifics during commissioning.
- Requesting and collecting job descriptions and associated risk assessments.
- Supervision and issuing of work permits for respective tasks.
- Monitoring compliance with legal requirements for occupational and fire safety on construction sites.
- Maintaining incident statistics and analyzing incidents.
- Regular inspections and documentation.
- Conducting kick-off meetings with client and contractors.
- Monitoring and ensuring compliance with specific work details.
- Monitoring and ensuring proper protective measures during work.
Ayushi Rastogi
Last position:
GIS Processing Intern at Fischer Teamplan Ingenieurbüro GmbH
- Collaborated on a pipeline construction project to expand the Rhein-Main-Link medium-voltage network using GIS technologies
- Created and processed data models, ensuring accuracy and consistency of project data
- Synchronized and maintained geospatial data for regulatory analysis
- Identified and analyzed critical crossing points with external lines and developed longitudinal profiles from digital terrain models (DTM)
- Performed digitization updates and set up a geographic information system (GIS) according to project requirements
- Conducted a topographic analysis to support the planning of horizontal drilling for the pipeline project
- Designed and created a project infographic for visualization and reporting
Dragan Tatalovic
Last position:
Advanced Training CAD Revit Architecture & BIM-Modeler Revit at Alfa Training AG
Robert Graf
Last position:
Senior Construction Manager at Arlanxeo Deutschland
- New construction of a water treatment plant
- Leading the specialist construction managers (civil and steel construction, HSE manager)
- Monitoring execution with regard to contract compliance, schedule adherence and quality
- Budget responsibility
- Maintaining and updating the schedule
- Moderating project meetings
- Claim management
- Change management
- Defect management
- Acceptance inspections
- Occupational safety
Vadim Hecht
Last position:
Planning Engineer at Ineratec GmbH
- Planning engineer for a power-to-liquid plant/scrubber in renewable energy/hydrogen
Gerald Stibbe
Last position:
Rohr2 Calculations at B+L Engineering GmbH
- Various clients, contract-based
Heinz-Jürgen Eckey
Last position:
Senior Project Buyer Fuel Switch, plant construction, building construction, steel construction at EnBW AG
Florian Spribille
Last position:
Senior Consultant Automation at AbbVie Deutschland GmbH
- Engineering and consulting for building automation (BACS) and GMP monitoring systems
- EMS and energy management system
- FMEA
- Coordination with manufacturers and commissioning
- Qualification
Discover over 15,000 top freelancers
Statistics of experts using Piping Design
Aggregated from the professional profiles of matched freelancers.
Experience
31 years
Position duration
1.8 years
Positions per freelancer
18
Top business areas
Project Management, Operations, Product Development
Top industries
Construction, Manufacturing, Energy
Certification focus areas
Product Development, Quality Assurance, Operations
Bachelor's degree or higher
92%
Master's degree or higher
58%
Doctorate
17%
Certifications per freelancer
2
Most common languages
German, English, Spanish
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using Piping Design
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
Plant layouts
Piping Design covers the planning of pipe routes in plants, factories, and infrastructure systems. It defines how fluids, gases, steam, and utilities move safely between equipment, valves, and tie-ins. Strong work balances process needs, access, maintainability, and constructability.
Core deliverables
Typical outputs include:
- P&ID-based routing and line lists
- 3D model layout and clash checks
- Isometrics and spool-ready drawings
- Material take-offs and support details
- Revision packages for fabrication and site teams
Tools and standards
Experts in piping design often work with Plant 3D, SmartPlant, PDMS, E3D, and related CAD or plant design systems. They read P&IDs, equipment datasheets, and stress inputs, then turn them into workable layouts. Knowledge of codes, line classes, and vendor data is essential.
When to bring in help
Companies usually call in freelance specialists when a project needs extra drafting capacity, a plant revamp, or support for a tight shutdown window. It also helps when in-house teams need an independent review of a complex routing problem or a fast update after scope changes. In Germany, this often fits process industry work that needs careful coordination with engineering and site teams.
What strong experts do
- Spot clashes before fabrication starts
- Keep routing clear for operation and maintenance
- Coordinate with civil, mechanical, and process teams
- Adapt layouts to existing plant constraints
- Produce drawings that are consistent and buildable
What to expect
Good piping specialists ask about process conditions, equipment locations, access zones, and shutdown limits early. They explain trade-offs clearly and keep documentation consistent across models, drawings, and lists. For remote work, they need structured inputs and fast feedback; for on-site work, they add value by checking real space constraints and installation details.
Frequently asked questions
Key details about Piping Design, drawn from the questions we get asked most.
Piping Design covers the route, layout, and documentation of pipe systems in plants and industrial facilities. It includes how lines connect equipment, where valves and supports go, and how the design stays safe, maintainable, and buildable. Teams use it for new plants, revamps, and tie-ins.
Piping Design turns process intent into physical layout, while a P&ID shows the process logic and control relationships. The P&ID is the starting point, but it does not solve routing, clashes, access, or fabrication details. Good specialists work from both views and keep them aligned.
A strong Piping Design freelancer usually knows plant design tools such as SmartPlant, PDMS, E3D, or Plant 3D. They should also be comfortable with 2D drafting, 3D model reviews, line lists, and isometric output. Familiarity with plant codes and company standards matters just as much as software.
Good Piping Design work depends on process awareness, equipment coordination, and practical constructability. Support design, stress input, insulation needs, and maintenance access often shape the final layout. Communication with civil, mechanical, and instrumentation specialists is part of the role.
Companies usually bring in Piping Design specialists when internal capacity is tight or the scope changes quickly. That happens during plant modifications, shutdown work, package integration, or detailed design peaks. It is also useful when a second pair of eyes is needed on a difficult routing problem.
Yes, Piping Design specialists can often support German projects remotely if they have clear drawings, model access, and disciplined review routines. On-site presence is more useful for brownfield work, field walks, and final layout checks in crowded plant areas. Many teams use a mix of both.
A good Piping Design expert produces consistent drawings, clean model coordination, and practical routing that can be built without confusion. Look for clear handling of revisions, attention to plant access, and solid understanding of line classes and equipment constraints. Weak work usually shows up as clashes, missing details, or inconsistent documentation.
Not exactly. Piping Design is the layout and documentation side of the discipline, while piping engineering may include stress analysis, code checks, and technical specification. Piping drafting is narrower and focuses more on drawing production than on the design decisions behind the layout.
The average hourly rate of freelancers in Germany who have used Piping Design in their recent projects is 91 €, which corresponds to a daily rate of about 725 € based on an 8-hour working day.
Of the freelancers in Germany who have used Piping Design in their recent projects, 92% hold at least a Bachelor's degree, 58% hold at least a Master's degree, and 17% hold a doctorate.
On average, freelancers in Germany who have used Piping Design in their recent projects have 31 years of professional experience, with a single engagement typically lasting around 1.8 years.
The most common languages among freelancers in Germany who have used Piping Design in their recent projects are German (100%), English (100%), and Spanish (16%).
The most common industries among freelancers in Germany who have used Piping Design in their recent projects are Construction (84%), Manufacturing (84%), and Energy (79%).
The most common business areas among freelancers in Germany who have used Piping Design in their recent projects are Project Management (100%), Operations (84%), and Product Development (79%).
Main locations of FRATCH Experts, who have recently used Piping Design
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
