ISO/IEC 15504 Experts in Germany
in minutes from over 15,000 CVs with the power of AIHire experts who know ISO/IEC 15504, SPICE assessments, process capability models, and improvement roadmaps for regulated delivery. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used ISO/IEC 15504
Parthiban Mohanraj
Last position:
Quality Assurance Engineer at Hanon Systems GmbH
Define the QA strategy and plan for the above mentioned OEMs project.
Identify applicable processes, methods, and standards to be followed (eg, GS_95014, KGAS, ISO/IEC 15504, ISO 26262, ISO 21434, etc.).
Plan reviews, audits, and assessments as per the strategy.
Check whether the project follows defined processes (System, software, mechanical, hardware, testing, change, configuration, problem, risk etc.) as per strategy.
Provide QA support to software process: software requirement analysis, software architectural design, software detailed design and unit construction, software unit verification, software component verification and integration verification, software verification processes.
Monitor compliance with organization-wide and project-specific standards.
Verify that deviations are documented and escalated.
Review work products (requirements, design docs, test cases, code, reports (MISRA, C0, C1, coding standards), etc.).
Check compliance with standards, templates, and checklists.
Ensure that bi-directional traceability exists (e.g., requirements ↔ design ↔ tests).
Give objective evidence (not influenced by delivery pressure) during assessments.
Identify non-conformances (process not followed, missing approvals, wrong standard).
Report deviations and track them until closure.
Verify that corrective actions are implemented (5why, Ishikawa, 8D, FMEA, FTA, DFM, DRP, PCC, LLBP, PDCA).
Provide QA status reports to management and project stakeholders.
Highlight risks related to process non-compliance.
Deliver objective evidence for assessments/audits (e.g., ASPICE, ISO/IEC 15504, ISO 26262, ISO 21434, ISO_PAS_8800).
Collect and analyze QA findings.
Suggest process improvements.
Support lessons learned activities.
Achieved ASPICE Level 1 and Level 2 for multiple Audi and Mercedes-Benz projects assessments.
Gildas Djomen
Last position:
System Team Lead Diagnostics – Hybrid & Electric Drives (HEV/MHEV/PHEV) for Transmission and Engine (NA/SA) at Stellantis e-transmission
- Technical lead of diagnostics activities for eDCT transmissions and drive systems in the area of hybrid (HEV), mild-hybrid (MHEV), and plug-in hybrid vehicles (PHEV)
- Responsibility for the development and validation of DTC strategies (OBD / EOBD) for markets in North and South America and the EU
- Coordination between interdisciplinary teams (system development, software, safety, calibration, after-sales)
- Creation and maintenance of diagnostic specifications (DID, DTC matrix, snapshot, freeze frame) according to STLA standards
- Support with troubleshooting, validation tests, EOL processes, and internal audits
- Technical interface to suppliers (Bosch, Valeo, etc.) in the area of actuators, sensors, and electric pumps
- Creation of diagnostic RFQ
Peter Streibel
Last position:
Rollout Manager at Siemens Healthineers
- Cisco SDA LAN network
- Transition and transformation
Thomas Arends
Last position:
Interim Management at Vincorion Power Systems GmbH
- Process and project management to optimize products and development processes for energy systems
- Technical risk management
- Requirements engineering and system architecture
- System FMEA of power generator units and energy storage modules aiming for generic structures
- Claims management according to Section 313 of the German Civil Code
- Regulatory environment: military and NATO standards, AQAP, VG norms
Rüdiger Stoll
Last position:
Consultant for Functional Safety: I3 Confirmation Reviews according to ISO 26262:2018 at VW
Conducting I3 confirmation reviews for all work products at the item (system) level that require I3 review, according to ISO 26262:2018: impact analysis, safety plan, functional safety concept, technical safety concept, FMEA, FTA, DFA, integration and test strategy, safety validation specification, safety case
Creating/updating review criteria for I3/I2 confirmation reviews of all work products based on ISO 26262:2018
Discussing findings with specialist departments as needed
Coordinating findings and review criteria with the responsible customer department
Training new internal employees in performing I3 confirmation reviews
ISO 26262
Requirements Analysis
Failure Analysis (FTA, FMEA, DFA)
Microsoft Office
Jira
Confluence DevStack
Document Management System (DMS)
Jan Wahler
Last position:
Technical Consultant at AI Beratung (KMU)
- Evaluation of RAG for legal advisory (build or buy)
- Evaluation and POC of RAG for an ERP time tracking module
- Consulting on foundation model selection
- Setup AI development environment (eliminating shadow AI)
- AI strategy consulting
- AI-assisted code creation and context engineering make change sets larger
- Strong software engineering expertise, code reviews and safeguarding through pipelines and domain-specific automated test cases
Discover over 15,000 top freelancers
Statistics of experts using ISO/IEC 15504
Aggregated from the professional profiles of matched freelancers.
Experience
27 years
Position duration
2.2 years
Positions per freelancer
16
Top business areas
Information Technology, Quality Assurance, Product Development
Top industries
Manufacturing, Automotive, Energy
Certification focus areas
Project Management, Quality Assurance, Information Technology
Bachelor's degree or higher
83%
Master's degree or higher
50%
Certifications per freelancer
8
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using ISO/IEC 15504
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
What it covers
ISO/IEC 15504 is the standard many teams know as SPICE. It helps assess how well a process is defined, managed, measured, and improved. Companies use it to review software and systems work, compare suppliers, and plan process improvements.
Typical work
- Process capability and maturity assessments
- Gap analysis against the standard
- Improvement plans and action tracking
- Supplier and tender evaluations
- Coaching teams through assessment findings
Where it fits
ISO/IEC 15504 often appears in automotive, embedded, defense, and industrial software work, especially when process discipline matters. In Germany, it is common in supplier chains that need clear evidence of quality, traceability, and controlled delivery.
Tooling and evidence
Strong specialists work with process models, interview notes, evidence lists, audit trails, and assessment reports. They know how to map practices to capability levels and how to present findings in a way that helps both management and delivery teams act on them.
When to bring in help
Companies bring in freelance experts when they need an independent assessment, a fresh improvement plan, or support before a customer audit. They are also useful when a team already follows SPICE but wants better consistency across sites, suppliers, or product lines.
What strong experts do
They ask clear questions, compare stated process with actual work, and separate real evidence from paperwork. They understand ISO/IEC 15504, but they also know how to work with engineers, quality teams, and managers without slowing delivery.
Frequently asked questions
Everything clients usually want to know about ISO/IEC 15504, in one place.
ISO/IEC 15504 is used to assess how well an organization’s processes are working and where they can improve. Many teams know it as SPICE, especially in software and systems environments. It is often used for internal improvement, supplier checks, and customer-facing process reviews.
ISO/IEC 15504 is the formal standard, and SPICE is the name many people still use for it. In practice, the two terms usually point to the same process assessment approach. Searchers may also refer to the topic as software process assessment or capability assessment.
ISO/IEC 15504 and CMMI both deal with process capability and improvement, but they are not the same thing. ISO/IEC 15504 is a standard for assessing processes, while CMMI is a broader improvement model with its own structure. Companies often choose based on customer requirements, internal governance, or supplier expectations.
A strong ISO/IEC 15504 specialist usually understands process engineering, audit work, quality management, and facilitation. Experience with automotive or embedded development helps when assessments need to fit regulated or supplier-driven environments. Good writing matters too, because the report has to be clear and actionable.
ISO/IEC 15504 work can be small or broad, but it always needs someone who has done real assessments, not just read the standard. For a focused review, one strong specialist may be enough. For larger improvement programs, companies often need someone who can assess, coach, and help teams close gaps.
Yes, ISO/IEC 15504 assessments can often start remotely through document review, interviews, and evidence collection. On-site time is useful when teams want observations, workshops, or support across multiple departments. In Germany, many companies prefer a mix of remote preparation and local sessions in English or German.
A good ISO/IEC 15504 expert does more than quote the standard. Look for someone who can explain capability ratings, ask sharp questions, and turn findings into practical next steps. Strong specialists also stay neutral, use clear evidence, and avoid turning an assessment into a checklist exercise.
With ISO/IEC 15504, common deliverables include assessment plans, interview guides, evidence logs, capability findings, and an improvement roadmap. Depending on the assignment, you may also get a supplier review, a management summary, or support for a follow-up reassessment. The best output is clear enough for both leaders and delivery teams to use.
The average hourly rate of freelancers in Germany who have used ISO/IEC 15504 in their recent projects is 121 €, which corresponds to a daily rate of about 965 € based on an 8-hour working day.
Of the freelancers in Germany who have used ISO/IEC 15504 in their recent projects, 83% hold at least a Bachelor's degree and 50% hold at least a Master's degree.
On average, freelancers in Germany who have used ISO/IEC 15504 in their recent projects have 27 years of professional experience, with a single engagement typically lasting around 2.2 years.
The most common languages among freelancers in Germany who have used ISO/IEC 15504 in their recent projects are German (100%), English (100%), and French (50%).
The most common industries among freelancers in Germany who have used ISO/IEC 15504 in their recent projects are Manufacturing (100%), Automotive (83%), and Energy (67%).
The most common business areas among freelancers in Germany who have used ISO/IEC 15504 in their recent projects are Information Technology (100%), Quality Assurance (100%), and Product Development (83%).
Main locations of FRATCH Experts, who have recently used ISO/IEC 15504
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
