IBM DOORS Experts in Germany

• Led the hardware development and validation of a safety-critical 400 V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in line with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-border EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.

• Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) reprocessing, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.

• End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field of view limits, and thermal and voltage-related ECU state machines. Used a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.

• Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.

• Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.

• Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurement data. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.

• Successfully managed complete engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept through system integration and validation to technical documentation, supplier coordination, and user training.

Project goal: Carrying out system tests and validating industrial communication and control systems, including requirements definition and verification.

Responsibilities:

• Test planning, test execution
• Test strategy, test cases, and test specifications
• Requirements analysis
• Ensuring traceability between requirements, test cases, and defects
• Carrying out regression and integration tests
• Defect analysis
• Simulation and validation
• NetSniffer Wireshark
• Supporting test automation (Python, CI/CD)
• Reporting
• Stakeholder coordination and agile collaboration (Scrum / SAFe / Kanban)
• V-Model
• CI/CD automation with Python, Groovy, and frameworks (Selenium, PyTest)

Technologies:: CAN, Modbus, Ethernet, PLC, PROFINET, Codebeamer ALM, Scrum, SAFe, MS Teams, Git, CI/CD with GitLab CI and TeamCity, Windows Batch, FAS, Wireshark, Python, Enterprise Architect (EA), AI tools (e.g. ChatGPT, Microsoft Copilot), VS Code, Tia Portal, SCL, Python (Selenium, PyTest)

• Analysis of affected business processes taking numerous stakeholders into account
• Interface analysis, architecture and system design
• Communicating and coordinating various subprojects and interface partners
• Creating epics and user stories, maintaining the backlog, workshops and review presentations
• Support during implementation between business departments and development
• Test management including strategy and approach definition
• Test case definition, execution and approval
• Cross-team organization of integration and acceptance tests
• Support of test environments
• Technologies and tools: Java, Angular, Kubectl, REST, AWS SNS/SQS, Kafka, S4/HANA, Bruno

Project scope: Supported the establishment, scaling and continuous improvement of project management and support processes by modernizing governance, processes, documentation, deliverables tracking, training content and tool-supported ways of working across a complex energy project environment.

Key contributions

• Supported the build-up and maturation of the PMO department, including governance structures, operational frameworks, project management processes, templates and deliverables tracking mechanisms.
• Conducted As-Is analysis of existing processes and their documentation, including process inventory, interface mapping, problem identification and creation of visualizations and white papers to improve shared understanding.
• Reviewed and improved project management documentation, templates and work instructions, including support for a project document master list to strengthen standardization and control.
• Designed and supported rollout of a lessons learned process and related system/application, including pilot preparation, coordination and implementation support.
• Mapped and supported implementation of a new resource management process connected to the rollout of a resource planning tool.
• Led and supported adoption of agile ways of working and Atlassian tools, including Jira and Confluence team boards, plans/roadmaps, dashboards, sprint planning and retrospectives.
• Acted as key user for continuous usage improvements in PMO tools and collaboration practices.
• Developed training curricula, instructional videos, supporting materials and PMO Open Doors sessions to improve capability transfer and provide a recurring forum for updates and information sharing.
• Developed a skills matrix concept and supported rollout as a basis for structured capability management and training demand analysis.
• Supported preparation of department offsites, implementation of a new Integrated Management System (IMS), creation of a SharePoint-based PMO website and department integration after restructuring.

Results / business impact

• Improved project management & PMO structure, processes and their documentation
• Enhanced transparency and standardization across processes, documentation, governance routines and project deliverables tracking.
• Enhanced information flow and knowledge transfer through SharePoint-based communication, PMO forums, training curricula and instructional videos.
• Strengthened lessons learned, resource planning, agile collaboration, capability management and post-restructure department integration.

Testing adjustments to customer requests for warehouse / logistics software

Windows 10 / 11 Atlassian Tool Chain Agile testing / Kanban

• Own full-stack development of an AI-native enterprise platform built on TypeScript, React, Vite, tRPC, Hono, and PostgreSQL, delivering AI-powered consulting workflows to B2B clients.
• Designed and shipped a multi-agent AI system using ReAct framework and Claude skills-style workflow patterns, including an intelligent PM assistant with rich system prompts, slash commands, tool integrations, and streaming chat UI.
• Architected an LLM evaluation framework: rubric-based LLM-as-judge, golden datasets, regression testing, and automated quality gating — ensuring consistent AI output quality at scale.
• Integrated LangFuse for end-to-end LLM tracing, conversation replays, and evaluation pipelines, enabling data-driven prompt optimisation that reduced token costs and response variance.
• Built with Drizzle ORM, pgvector, and knowledge graphs for structured data access, semantic search, and relationship-aware AI reasoning across the platform.
• Led TanStack React Query migration across the application — replacing manual state management with centralised caching and automatic refetching, reducing data-fetching boilerplate significantly.
• Practiced AI-native development throughout: Claude Code, Codex, Perplexity SDK, and LLM-assisted testing across the full development lifecycle. Deployed on Vercel + Azure ACA with Biome for linting/formatting.

• Responsible for the solution architectures of the eGov solution "e-Akte" for KRITIS authorities of the state of NRW, tailored to the specific needs of the customers, as well as ensuring that these solutions can be operated efficiently and reliably
• Modeling the KRITIS IT architecture (cloud infrastructure, cybersecurity and development) using Archimate
• Ensuring IT governance, compliance, data protection, and the establishment of standards in line with the business strategy
• Managing service providers for the eAkte product nscale from Ceyonic
• EAM and LeanIX, documentation of IT systems, interfaces, technologies
• Solution architecture & stakeholder management, including business units & IT teams

• Define the QA strategy and plan for the above mentioned OEMs project.

• Identify applicable processes, methods, and standards to be followed (eg, GS_95014, KGAS, ISO/IEC 15504, ISO 26262, ISO 21434, etc.).

• Plan reviews, audits, and assessments as per the strategy.

• Check whether the project follows defined processes (System, software, mechanical, hardware, testing, change, configuration, problem, risk etc.) as per strategy.

• Provide QA support to software process: software requirement analysis, software architectural design, software detailed design and unit construction, software unit verification, software component verification and integration verification, software verification processes.

• Monitor compliance with organization-wide and project-specific standards.

• Verify that deviations are documented and escalated.

• Review work products (requirements, design docs, test cases, code, reports (MISRA, C0, C1, coding standards), etc.).

• Check compliance with standards, templates, and checklists.

• Ensure that bi-directional traceability exists (e.g., requirements ↔ design ↔ tests).

• Give objective evidence (not influenced by delivery pressure) during assessments.

• Identify non-conformances (process not followed, missing approvals, wrong standard).

• Report deviations and track them until closure.

• Verify that corrective actions are implemented (5why, Ishikawa, 8D, FMEA, FTA, DFM, DRP, PCC, LLBP, PDCA).

• Provide QA status reports to management and project stakeholders.

• Highlight risks related to process non-compliance.

• Deliver objective evidence for assessments/audits (e.g., ASPICE, ISO/IEC 15504, ISO 26262, ISO 21434, ISO_PAS_8800).

• Collect and analyze QA findings.

• Suggest process improvements.

• Support lessons learned activities.

• Achieved ASPICE Level 1 and Level 2 for multiple Audi and Mercedes-Benz projects assessments.

Creation of workflows for generating the data basis for the article import of a web shop: combining data from several sources, analyzing the requirements, designing the process with Jupyter Notebooks and Knime. Also creating code for automation in Python using Polars and Pandas.

Processing the source data, filtering and merging the source files and creating the needed intermediate products, creating the upload files, plausibility checks, quality checks.

Technologies used: PyCharm, Python, Jupyter Notebooks, SQL, Knime. Pandas, Polars

• Analysis of requirements and the current situation
• Migration of an old domain structure and Tobit to Exchange 2019 with integration to MS365
• Evaluation of implementation paths and planning for securing sensitive data
• Planning regarding BSI basic protection, the German Federal Data Protection Act (BDSG), and GDPR
• IT governance and IT security backtests
• Support with ERP setup and securing mail transfer
• Hyper-V 2016/2022, Microsoft Terminal Services Cluster, Microsoft Exchange 2019
• Office 365, Microsoft 365, Azure AD, Teams, Salesforce
• Cisco, Zyxel, and HP switches, Sophos firewalls/UTMs, SecurePoint
• Microsoft IIS 2022, IPv4/IPv6, Veeam, Wortmann online backup, NextCloud
• Services: DNS, DHCP, TCP/IP, subnetting, firewalling, routing, VoIP, Group Policy (GPO), SIEM, remote work, home office, high availability, failover, VLAN, PRTG

• Led strategic software development of fusion algorithms for precise object tracking, trajectory prediction, and environment modeling based on multimodal sensor data (e.g., camera, LiDAR, radar, GNSS, IMU)
• Developed and implemented navigation algorithms for autonomous vehicles, including path planning, obstacle avoidance, and sensor fusion of visual, inertial, and distance-based sensor sources
• Automated extraction and training processes with CI/CD
• Developed and optimized data pipelines and processes in Microsoft Azure using Apache Spark, Databricks, and PySpark
• Developed and optimized embedded software for automotive control units
• Designed latency-critical software for real-time control in robotic systems with RTOS (freeRTOS, SAFERTOS)
• Used the Vector toolchain (CANdela, DaVinci, CANoe) for configuration and diagnostics
• Optimized existing data pipelines and processes (ETL, data warehouse, SQL)
• Developed and trained machine learning models using PyTorch
• Created deep-learning-based object detection and visual SLAM algorithms, trained on combined data from camera, LiDAR, and IMU sensors
• Implemented computer vision algorithms for object detection and classification in robotic systems using OpenCV and YOLO, utilizing synchronized image and depth data
• Implemented behavior-based control systems for autonomous robots using ROS2 Behavior Trees
• Performed testing, release, and integration of sensor fusion algorithms into automotive production programs
• Ensured adherence to proper software development processes and safety standards to guarantee high data quality (MISRA, ISO 26262, ASPICE)

• Developed model-based software for hydrogen tank control units using MATLAB/Simulink, aligned with ISO 26262 functional safety requirements
• Performed system integration and software verification across MIL and HIL environments using dSPACE and Vector tools
• Defined software architecture (SADS) with interface specifications for CAN, analog, and digital communication protocols
• Generated production-ready embedded C code using Simulink Embedded Coder; created and maintained A2L calibration files with CANape
• Designed and executed MIL/HIL test cases ensuring full coverage of functional and safety requirements
• Implemented CODESYS PLC applications on IFM ecomatController; applied CAN and Modbus TCP/IP communication protocols
• Contributed to HMI/UI development using Qt/C++ on Linux (Qt Creator)
• Applied agile Kanban workflow with Git-based version control (Bitbucket)

Tools: MATLAB, Simulink, CANape, CANalyzer, PCAN-View, Embedded Coder, CODESYS, TTC2038/PXROS, Codebeamer, Jira, Git

• Managed engineering configuration and change activities throughout the product development lifecycle for chassis and power electronics systems.
• Coordinated implementation of engineering changes between development, manufacturing, validation, and quality teams.
• Maintained product traceability and configuration consistency across prototype, pre-series, and series production phases.
• Administered requirements and configuration baselines using Windchill, Jira, and Confluence.
• Supported change control boards and engineering review meetings to assess impacts, risks, and implementation plans.
• Ensured compliance with development processes and quality standards through configuration audits and lifecycle reviews.
• Coordinated manufacturing readiness activities and monitored implementation of approved changes.

Project: Intelligent Light Communication Software — Audi

• Analysis and clarification of system requirements with the customer and translation into software architecture and design decisions
• Architecture and implementation of CAN FD and SPI communication on NXP S32K312
• Design and development of flash bootloader, flash driver, and boot manager for secure OTA-capable updates
• Configuration of the AUTOSAR BSW architecture (Dcm, Dem, NvM, BswM, Os, Mcu, Port, Com stack, Rtc) for portability and maintainability
• Design of the crypto stack (Csm, CryIf, Crypto) for secure flash and diagnostic data; integration of the NXP HSE core and wrapper layer
• Integration of customer-specific modules (Sfd, Ivd, Npm) into the Vector AUTOSAR stack
• Definition of the memory architecture: Memmap, CMake, and linker script configuration
• Leading board bring-up for the Audi light demo platform; implementation of diagnostic routines and identifiers