Stateflow Experts in Germany
in minutes from over 15,000 CVs with the power of AI.Hire experts who design Stateflow charts, model event-driven logic, and connect control behavior with Simulink, embedded code, and verification workflows. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used Stateflow
Saurabh Helambe
Last position:
Master Thesis, Simulation at AVL in Germany
- Engineered and validated a full-vehicle thermal management system in MiL simulation, achieving 95% correlation accuracy against real-world vehicle measurements, directly supporting virtual calibration and reducing dependency on physical test benches.
- Led end-to-end Model-in-the-Loop (MiL) simulation development using AVL CruiseM and MATLAB/Simulink, covering system architecture, parameterization, and validation.
- Acquired and analyzed vehicle sensor measurements (temperature, volumetric flow rate) using dSpace MicroAutoBox (HiL) and IPEmotion, translating raw data into actionable calibration insights.
- Calibrated and optimized critical actuators and thermal components - pumps, valves, electric heaters, heat exchangers, and refrigerant circuits and identified/integrated previously missing physical behaviors to close the gap between simulated and real vehicle performance.
- Designed and tuned an integrated actuator controller with precisely calibrated parameters, producing a high-accuracy virtual model adopted for downstream development use.
Lino Giefer
Last position:
Senior Data Scientist at VinFast Germany GmbH
- Led strategic software development of fusion algorithms for precise object tracking, trajectory prediction, and environment modeling based on multimodal sensor data (e.g., camera, LiDAR, radar, GNSS, IMU)
- Developed and implemented navigation algorithms for autonomous vehicles, including path planning, obstacle avoidance, and sensor fusion of visual, inertial, and distance-based sensor sources
- Automated extraction and training processes with CI/CD
- Developed and optimized data pipelines and processes in Microsoft Azure using Apache Spark, Databricks, and PySpark
- Developed and optimized embedded software for automotive control units
- Designed latency-critical software for real-time control in robotic systems with RTOS (freeRTOS, SAFERTOS)
- Used the Vector toolchain (CANdela, DaVinci, CANoe) for configuration and diagnostics
- Optimized existing data pipelines and processes (ETL, data warehouse, SQL)
- Developed and trained machine learning models using PyTorch
- Created deep-learning-based object detection and visual SLAM algorithms, trained on combined data from camera, LiDAR, and IMU sensors
- Implemented computer vision algorithms for object detection and classification in robotic systems using OpenCV and YOLO, utilizing synchronized image and depth data
- Implemented behavior-based control systems for autonomous robots using ROS2 Behavior Trees
- Performed testing, release, and integration of sensor fusion algorithms into automotive production programs
- Ensured adherence to proper software development processes and safety standards to guarantee high data quality (MISRA, ISO 26262, ASPICE)
Olfa Azzabi
Last position:
Senior Embedded Software Engineer / Function Developer at Enginius GmbH (FAUN GROUP)
- Developed model-based software for hydrogen tank control units using MATLAB/Simulink, aligned with ISO 26262 functional safety requirements
- Performed system integration and software verification across MIL and HIL environments using dSPACE and Vector tools
- Defined software architecture (SADS) with interface specifications for CAN, analog, and digital communication protocols
- Generated production-ready embedded C code using Simulink Embedded Coder; created and maintained A2L calibration files with CANape
- Designed and executed MIL/HIL test cases ensuring full coverage of functional and safety requirements
- Implemented CODESYS PLC applications on IFM ecomatController; applied CAN and Modbus TCP/IP communication protocols
- Contributed to HMI/UI development using Qt/C++ on Linux (Qt Creator)
- Applied agile Kanban workflow with Git-based version control (Bitbucket)
Tools: MATLAB, Simulink, CANape, CANalyzer, PCAN-View, Embedded Coder, CODESYS, TTC2038/PXROS, Codebeamer, Jira, Git
Roumaissa Troudi
Last position:
Master’s Thesis: AI-Based Analysis of 2D and Exploded View Drawings at Technical University of Munich
- Developed an end-to-end AI pipeline for analyzing 2D exploded-view drawings using computer vision and deep learning models.
- Integrated YOLO-based object detection (Bounding Boxes, Post-Processing, Overlap Handling) for accurate part and callout detection.
- Applied the Segment Anything Model (SAM) for fine-grained segmentation and separation of individual components.
- Implemented OCR and feature extraction modules, and compared Vision Language Models (VLM) and traditional computer vision approaches in terms of accuracy, runtime, and scalability.
Yoav Netzer
Last position:
Freelance Software Architect at Freelance Consultant
- Various small consultations, e.g. concepts and arcitectures.
- Updating my Matlab, Linux, IPv6, Cyber-Security, C++ (up to 23) and Python skills.
Rafael Kolloch
Last position:
Senior Android Developer / Team-Lead at IBM Deutschland
- Further development and release support of a white-label e-prescription component for health insurance companies
- Technologies: Android (Kotlin), Kotlin Multiplatform, Coroutines, Jetpack Compose, MVVM, StateFlow, Gradle, ProGuard
Ananthu M S
Last position:
Research Assistant and Doctoral Student at ESCP Business School
- Conducts doctoral research at the intersection of Artificial Intelligence, optimization, and operations management with a strong emphasis on mathematical modeling and problem-solving.
- Supports academic teaching by assisting in undergraduate mathematics courses, fostering analytical thinking and quantitative skills in students.
Amr Tolba
Last position:
System Architect at Valeo
- Technical responsibility for the ConMod2.0 (Connectivity Module) product, which will connect future vehicles in the network as nodes with the Internet of Things blockchain.
- Lead technical discussions to define the specifications of various components (antennas, modems, Bluetooth chips, Wi-Fi chips, and microprocessors) with ConMod2.0 component suppliers (Quectel, Qualcomm, Marvell, and STMicroelectronics) and to discuss and plan system design iterations.
- Coordinate with other stakeholders, e.g., electronics system architect, software architect, software PMs, and software developers at Valeo Egypt, to define architecture concepts.
Discover over 15,000 top freelancers
Statistics of experts using Stateflow
Aggregated from the professional profiles of matched freelancers.
Experience
14 years
Position duration
1.8 years
Positions per freelancer
10
Top business areas
Product Development, Information Technology, Research and Development
Top industries
Automotive, Information Technology, Manufacturing
Certification focus areas
Product Development, Quality Assurance, Research and Development
Bachelor's degree or higher
100%
Master's degree or higher
88%
Doctorate
38%
Certifications per freelancer
2
Most common languages
English, German, Spanish
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using Stateflow
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
Stateflow basics
Stateflow is the MathWorks language and tool for modeling state-based and event-driven behavior. It is used inside the Simulink ecosystem to define logic that depends on modes, transitions, conditions, and events. Teams use it when plain block diagrams are not enough.
What it builds
Stateflow specialists model control logic for systems that switch between states or react to triggers.
- Mode logic and state machines
- Supervisory control for Simulink models
- Embedded decision logic for ECU and controller software
- Requirements-linked behavior for verification
Ecosystem and tools
Strong professionals work fluently with Stateflow charts, Simulink models, MATLAB scripts, and related testing tools. They understand how state logic fits into model-based design, how data and events flow through a chart, and how generated code behaves in deployment. In Germany, this often matters in automotive, industrial automation, and other engineering-heavy environments.
When companies bring in specialists
Companies usually look for freelance Stateflow expertise when models become hard to maintain, logic needs a redesign, or code generation must stay aligned with system behavior. It also helps when teams need support for reviews, traceability, or a handover from MATLAB prototypes to production-ready models.
What good work looks like
A strong Stateflow specialist writes clear, testable charts and keeps state logic simple. They avoid tangled transitions, model edge cases explicitly, and document assumptions in a way that other experts can review. Good work is easy to simulate, verify, and maintain.
Typical engagement focus
- Chart design and refactoring
- Simulink integration
- Verification and simulation support
- Code generation checks
- Documentation for engineering teams
Frequently asked questions
Curious about Stateflow? Here are the answers that come up again and again.
Stateflow is used to model state machines and event-driven logic in the Simulink environment. Companies use it for mode handling, supervisory control, and behavior that depends on triggers, conditions, and transitions. It is a good fit when a system needs clear decision logic, not just signal processing.
Stateflow adds state-based and event-based behavior on top of Simulink. Simulink is stronger for continuous-time and signal flow models, while Stateflow is better for logic such as modes, sequencing, and branching decisions. Many projects need both together.
Stateflow is broader than a simple finite state machine editor. It supports state charts, events, transitions, temporal logic, and guards, all within the MathWorks modeling workflow. That makes it useful for control logic that is more complex than a basic state diagram.
A strong Stateflow specialist usually knows Simulink, MATLAB, model-based design, and verification practices. For code-heavy projects, knowledge of embedded systems and code generation is also useful. Teams often value clear documentation and disciplined model structure as much as tool knowledge.
The right level depends on the task. A small chart cleanup may need only focused experience, while safety-related or production-critical models usually need deeper knowledge of Simulink behavior, testability, and code generation. Ask for examples that match your system type, not just general tool familiarity.
Yes, most Stateflow work can be done remotely if the specialist can access the model files, project context, and review process. For hardware-adjacent or highly regulated work, some on-site sessions in Germany may help with system knowledge, workshops, or sign-off meetings. A hybrid setup is common.
Look for clear charts, simple transitions, and behavior that is easy to simulate and test. Good Stateflow work also matches requirements, avoids hidden logic, and fits cleanly into the wider Simulink model. Ask for a short review of a real chart or a sample redesign approach.
Share the model, requirements, test cases, and any known pain points before work starts. A Stateflow freelancer can move faster when the scope is clear, the simulation setup is available, and the team explains how the chart fits into the larger system. If you use Simulink heavily, include that context too.
The average hourly rate of freelancers in Germany who have used Stateflow in their recent projects is 87 €, which corresponds to a daily rate of about 693 € based on an 8-hour working day.
Of the freelancers in Germany who have used Stateflow in their recent projects, 100% hold at least a Bachelor's degree, 88% hold at least a Master's degree, and 38% hold a doctorate.
On average, freelancers in Germany who have used Stateflow in their recent projects have 14 years of professional experience, with a single engagement typically lasting around 1.8 years.
The most common languages among freelancers in Germany who have used Stateflow in their recent projects are English (100%), German (88%), and Spanish (50%).
The most common industries among freelancers in Germany who have used Stateflow in their recent projects are Automotive (88%), Information Technology (88%), and Manufacturing (88%).
The most common business areas among freelancers in Germany who have used Stateflow in their recent projects are Product Development (100%), Information Technology (88%), and Research and Development (75%).
Main locations of FRATCH Experts, who have recently used Stateflow
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
