Find the perfect Electrical Engineers in Germany in minutes from over 15,000 CVs with the power of AI

AI-supported development and PM acceleration with agentic workflows; deep reinforcement learning; fully automated 24/7 setup.

• Development and implementation of technical guidelines for electrical and mechanical systems
• Development of the electrical safety organisation as responsible electrician (gVEFK)
• Implementation and oversight of DCIM and related technical software solutions
• Design of technical solutions for lifecycle infrastructure and customer projects

• Project management of electrical engineering and automation for the research vessel Meteor on behalf of the Federal Ministry of Research, Technology, and Space.
• Organized development.
• Negotiated with clients and project owners.
• Managed up to eight employees.

• Technical lead of diagnostics activities for eDCT transmissions and drive systems in the area of hybrid (HEV), mild-hybrid (MHEV), and plug-in hybrid vehicles (PHEV)
• Responsibility for the development and validation of DTC strategies (OBD / EOBD) for markets in North and South America and the EU
• Coordination between interdisciplinary teams (system development, software, safety, calibration, after-sales)
• Creation and maintenance of diagnostic specifications (DID, DTC matrix, snapshot, freeze frame) according to STLA standards
• Support with troubleshooting, validation tests, EOL processes, and internal audits
• Technical interface to suppliers (Bosch, Valeo, etc.) in the area of actuators, sensors, and electric pumps
• Creation of diagnostic RFQ

• Technical consulting for electrical engineering in the areas of control system design, measurement technology and automotive applications

• Participation in development, commissioning and optimization of individual components for hybrid electric drives including HV batteries and electrical auxiliary units

• Integration of individual systems into the overall system and preparation for homologation

• Development of analog and digital circuits

• Design of circuit diagrams in control and special machine construction for individual machines

• Definition of switch cabinet layout and switch cabinet wiring

• Selection and programming of electronic control (PLC) and display / control unit (HMI)

• Selection and parameterization of converters, sensors and DC-DC converters

• Adaptation of industrial and rail components for vehicle use in cooperation with external development partners

• Collaboration with external developers from specification to function testing and final acceptance of the finished device

• Design of HV network for hybrid vehicles as well as construction supervision and commissioning

• Specification and testing of electrified auxiliary units (steering, climate control, on-board power supply)

• Parameterization of frequency converters and programming of positioning controllers

• Preparation of quotes, creation of specifications, price negotiations and procurement of electrical items

• Scheduling and control as well as supervision of control system construction, wiring and machine wiring

• Creation of PLC programs and programming of operator panels (HMI)

• Functional testing of individual machine elements and sensor adjustment

• Initial commissioning at the manufacturer's site, test run of the machine, documentation preparation and revision of circuit documents

• Leading commissioning at the end customer, training of customer's staff and management of the electrical engineering department with supervision of employees

• Own patent research and patent monitoring (optoelectronic 3D measuring systems)

• Commissioning and troubleshooting of HV batteries for hybrid vehicles together with the manufacturer

• System responsibility for hybrid test vehicles, especially HV safety

• Use of CAD systems (AutoCad light), CAE systems (Caddy++ electrical 3.0SP1, EPLAN P8), MS Office, MS Visio, MS PowerPoint, Adobe Acrobat Standard, Vector CANalyzer, Mitsubishi Melsec Medoc Plus, Mac-Programmer Plus, S7 standard, Siemens Micro-Win 3.2, Siemens ProTool light and ProTool CS, S7-Net OPC server, programming software for frequency converters and positioning controllers, Sistema and Spice

• Previous project experience includes: integration of HV batteries in hybrid vehicles, development of optoelectronic sensors, construction supervision of hybrid vehicles, commissioning of NC machines, electrical control of processing and packaging machines, commissioning of a photovoltaic system and restoration of a run-of-river power plant

• Sizing of electric drive systems for automated transport systems (AMR/AGV)

• Selection and validation of electrical and mechatronic components (BLDC motors & controllers, sensors, batteries) considering system requirements and operating conditions

• Integration of electric drive systems into automated transport systems (AMR/AGV) and ensuring functionality

• Analysis and correction of malfunctions in existing electrical systems

• Design of low-voltage networks (ELV) and implementation of relevant norms and standards (IEC, DIN)

• iShuttle 5.0: Optimization of the drive system of an autonomous transport shuttle with a lifting capacity of up to 4.4 tons

• iShuttle 6.0: Selection and integration of a drive system for an autonomous transport shuttle with a lifting capacity of up to 5.5 tons

• Modification and redesign of the software for a series component
• Review of the software concept and extension of functionality
• Modification of software functions for DC motor control
• Hardware: ARM STM32G474, CAN bus, Lauterbach T32
• Software: Microsoft Visual Studio Code

• Planning and development of electrical systems for test benches and alternative drive systems
• Designing a battery test station specifically for electric cars
• Specifying and designing controls, following standards, legal regulations, planning guidelines, and customer specs
• Sizing and selecting electrical components
• Creating electrical schematics and macros and maintaining parts data with EPLAN P8 Version Interface 2024
• Updating and adapting PLC programs
• Preparing SISTEMA calculations
• Supporting assembly and commissioning
• Ordering electrical components in SAP
• Ensuring compliance with common standards and regulations
• Sizing and cost calculation of high-current cables (1200 V/1000 A for AC and DC)

• Development of control units for the automotive industry incl. embedded software
• CAN bus, Vector Tools, CANoe
• Support of the development process according to ISO 26262
• Ensuring cyber security standards:
• Key exchange (PKI) between vehicle and control units
• Hardware Security Module (HSM)
• Communication with external service providers (international)
• Development (PCB) of measuring adapters, statistical analysis of sensors
• IoT and embedded software development, backend administration

• Project duration: 14 weeks
• Continuous debinding and sintering of MIM components for the automotive, aerospace, consumer goods (CCC), medical, military, office, and sporting equipment industries
• Example products: bipolar plates for fuel cells, orthodontic brackets, components for automotive airbag sensors, weapons
• Heating: electric
• Atmosphere: forming gas, Ar, N2, dissociated NH3, 100% H2 (e.g. for stainless steel products)
• Temperatures: 1280 °C, 1350 °C, 1450 °C, 1600 °C
• Mechanical and electrical assembly of the plant
• Routing of cable trays and cables
• Connection of machine components and sensors
• Wiring according to circuit diagrams
• Connection of control cabinets
• Performing I/O checks
• Support during commissioning
• Fault analysis and troubleshooting
• Coordination with customers and project management

• Planned and executed black-box adversarial testing of traffic-sign computer-vision pipelines; produced a threat model and attack-surface analysis for safety-critical scenarios
• Built a programmable hardware proof of concept using a holographic POV fan and a repeatable test harness to run real-time experiments and collect evidence for vulnerability assessment
• Quantified misclassification across lighting, distance, and angle, achieving up to 90% untargeted misclassification; delivered steps to reproduce, PoCs, and prioritized mitigations, and documented limitations and residual risk

• Designing and delivering learning content for electronics/electrical engineering (theory & practice)
• Conducting targeted exam preparations for apprentices and dual-study students
• Intercultural coaching of interns and promoting knowledge transfer

• TSO, DSO grids simulation and analysis
• Grid design integration of 3.4 GW RES and 400 MW of BESS for a large-scale green hydrogen plant
• Grid connection requirements for RES and BESS connection (50kW - 1MW)
• Requirements for providing Ancillary Services to the TSO from the flexible assets
• Expertise in Pre-FEED/FEED studies, EPC tender preparation, bid evaluation, and supplier negotiations for HV/MV substations and renewable integration projects
• Support for EPC design reviews, technical documentation, and FAT/SAT supervision across solar, wind, and hybrid energy systems

• Planning and designing hardware components for stacker cranes
• Creating engineering drawings and storing parts lists in SAP
• Maintaining and updating old and new circuit diagrams in EPLAN P8
• Managing master data up to creating macros for parts and assemblies
• Technical clarifications with suppliers, customers, and other departments
• Supporting the preparation of quotes and cost estimates