Power Electronics Experts in Germany
matched in minutes by AIHire experts who design converters, motor drives and battery power systems, while handling simulation, control logic, EMC and validation. FRATCH connects you with vetted, available freelancers through fast, precise AI matching.
Meet FRATCH Experts in Germany, who have recently used Power Electronics
Kristin S.
Last position:
Consulting and optimization in the area of request specifications, environmental certificates and construction site tests at SonnPower GmbH
Preparation of specifications and processes to optimize request specifications for energy containers. Preparation of guidelines for environmental certification and pressure testing of fuel lines on construction sites.
Ayusee S.
Last position:
Intern at Schaeffler
- Built a Trend-Scouting AI system to automate technology intelligence in power electronics and semiconductors, combining Azure OpenAI with LangChain, Scrapy-based web crawling for structured, noise-free data acquisition, and automated PDF reporting for internal R&D use. Developed a FastAPI-based (Uvicorn) web application to validate LLM outputs, test prompt strategies, and enable interactive system evaluation.
- Developed a real-time STM32 binary telemetry debugger with a PyQt-based GUI, featuring header-based frame synchronization, anomaly detection, template-driven payload decoding, time-aligned buffering, and live signal visualization.
- Developed an AI-driven power inductor designer using surrogate regression models for accurate electromagnetic and thermal prediction. Integrated multi-objective NSGA-II optimization to generate efficient, manufacturable designs.
Stephan F.
Last position:
Consultant at Toolmaking
The project covered the introduction of SAP S4HANA including EWM. The customer manufactures tools for the international market, with 300 production orders and 2,000 shipments to be processed every day. The project started with the "Explore phase," where the target business and SAP processes were defined, and ended with reaching the productivity goals with S4HANA. My role was Key User Trainer and optimizing the live processes.
Sami D.
Last position:
Task Force Leader (Program Management)
Taskforce leadership for the development of a central ECU for autonomous driving levels 23 and 4
Valentin R.
Last position:
Freelance Hardware Development Engineer at Swarm Biotactics
PCB design with Altium, MCU Programming, Prototyping
Christian S.
Last position:
Consultant, Managing Director, Shareholder at ST & Partners UG
- Project experience in the automotive supplier industry and with German automotive OEMs
Nikhil S.
Last position:
Configuration Management and Systems Engineer at Schaeffler AG
- Managed engineering configuration and change activities throughout the product development lifecycle for chassis and power electronics systems.
- Coordinated implementation of engineering changes between development, manufacturing, validation, and quality teams.
- Maintained product traceability and configuration consistency across prototype, pre-series, and series production phases.
- Administered requirements and configuration baselines using Windchill, Jira, and Confluence.
- Supported change control boards and engineering review meetings to assess impacts, risks, and implementation plans.
- Ensured compliance with development processes and quality standards through configuration audits and lifecycle reviews.
- Coordinated manufacturing readiness activities and monitored implementation of approved changes.
Vlad P.
Last position:
Senior Electrical Engineer at BHS Intralogistics GmbH
Sizing of electric drive systems for automated transport systems (AMR/AGV)
Selection and validation of electrical and mechatronic components (BLDC motors & controllers, sensors, batteries) considering system requirements and operating conditions
Integration of electric drive systems into automated transport systems (AMR/AGV) and ensuring functionality
Analysis and correction of malfunctions in existing electrical systems
Design of low-voltage networks (ELV) and implementation of relevant norms and standards (IEC, DIN)
iShuttle 5.0: Optimization of the drive system of an autonomous transport shuttle with a lifting capacity of up to 4.4 tons
iShuttle 6.0: Selection and integration of a drive system for an autonomous transport shuttle with a lifting capacity of up to 5.5 tons
Rudi W.
Last position:
Support and Consulting for R&D Project Management
- Relief, advisory support, and cover for the project manager in scheduling, quality, and risk management (development of an electronics platform)
- Tools used: MS Teams, Azure DevOps
Andreas L.
Last position:
Senior Consultant at Diconium Strategy / CARIAD
- Built a reporting structure with group brands, taking development platforms and global requirements into account; stakeholder management
- Identified needed KPIs, data sources and user requirements
- Developed, aligned and operationally implemented KPIs, aligned milestone plans
- Collected requirements for a heterogeneous tool landscape, interviewed stakeholders
- Managed implementation of Power BI dashboards, ensured technical operation
- Presented results at board level, moderated workshops, mitigated project risks
Maryam S.
Last position:
Hardware and Control Engineer at Technical University of Munich
- Developed a 6 kW AC-DC power converter for automotive applications.
- Selected and tested SiC MOSFETs, gate drivers, diodes, and high-voltage capacitors.
- Created schematics and designed multilayer PCBs in Altium Designer.
- Collaborated with software and mechanical teams for system integration.
- Developed an advanced control strategy for traction inverters.
- Implemented and tested control algorithms in MATLAB/Simulink.
- Conducted detailed efficiency, power factor, and common-mode current measurements.
Kilian K.
Last position:
Project Manager at Porsche E-Bike Performance GmbH
- Led an interdisciplinary team (R&D, procurement, quality, production)
- Planned and monitored milestones, budget, and resources
- Managed stakeholders and coordinated technical topics with suppliers
- Ensured technical maturity according to project plan
Waldemar N.
Last position:
Measurement Technology at Ingenieurbüro Neufeld
- Schematic and PCB layout design
- Prototype manufacturing
- EMC measurements and analysis
Maximilian D.
Last position:
Hardware Developer at Freelance Hardware Developer
- Optimization of a film stretching machine: concept design and proof of concept in SolidWorks and FEMM
- Development of a smart gas scale (Evergas) with mobile connectivity: functional and design prototype in SolidWorks, Cura, Eagle, Adafruit Web IDE
- Sensor system for brake disc measurement with Knorr-Bremse: proof of concept and patent preparation in SolidWorks, Cura, Eagle, FEMM, Adafruit Web IDE
- Development of a sensor for oil level measurement (Oilfox) with self-monitoring algorithms in SolidWorks, Cura, Eagle, Adafruit Web IDE
- Development of a miniature plastic extruder (Mcubus project) in SolidWorks, Cura, Eagle, LTSpice, FEMM, Arduino IDE
- Commissioning hardware for Magna Telemotive: electrical function tests, firmware porting in C++ and quality assurance coordination
- Electronics development for Sonnenglas: concepts for battery charging by solar power and LED control in Fusion 360, Eagle, Simplicity Studio, MPLab
- Development of a wake-up controller for Wing Man: vibration sensor and power-saving logic in Fusion 360, Eagle
- Hardware lead at Cariad SE: hardware testing, supplier communication, error management in iDEX, ODIS, CANoe
Amr H.
Last position:
Member at National EV Standards Committee
- Co-authored EV retrofitting regulations and service-center standards.
- Developed VIN and local-content frameworks and aligned multiple governmental stakeholders.
Discover over 15,000 top freelancers
Statistics of experts using Power Electronics
Aggregated from the professional profiles of matched freelancers.
Experience
22 years
Position duration
2.8 years
Positions per freelancer
10
Top business areas
Product Development, Quality Assurance, Research and Development
Top industries
Manufacturing, Automotive, Energy
Certification focus areas
Quality Assurance, Human Resources, Product Development
Bachelor's degree or higher
95%
Master's degree or higher
64%
Doctorate
18%
Certifications per freelancer
2
Most common languages
German, English, French
Speak two or more languages
92%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using Power Electronics
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Power Electronics experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (80%)
- Automotive (76%)
- Energy (36%)
- Healthcare (32%)
- Aerospace and Defense (28%)
- Education (24%)
- Information Technology (24%)
- Construction (20%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
What Power Electronics Covers
Power electronics controls and converts electrical energy using semiconductors, magnetic components, capacitors and digital control. It is used in power supplies, inverters, rectifiers, converters, chargers and motor drives. The work connects electrical design with embedded control, thermal management and system safety.
Systems and Applications
Companies use power electronics in electric mobility, renewable energy, industrial automation, data centres, rail systems, aerospace and consumer products. Typical deliverables include:
- DC-DC converters for battery and embedded systems
- Inverters for motors, solar installations and energy storage
- On-board chargers and charging hardware
- Power supplies with demanding efficiency and reliability targets
Tools and Technical Skills
Strong professionals work across circuit design, control theory and hardware validation. They may use SPICE-based simulation, MATLAB and Simulink, Altium Designer, PLECS or similar tools. Their work can include MOSFET and IGBT selection, gate-drive design, PCB layout, magnetic design, firmware interfaces, thermal analysis and EMC testing.
When Freelance Expertise Helps
External specialists are useful when a company must bring a prototype to test, resolve a recurring failure or add capacity during a product phase. They can support a new topology, review an existing design or prepare a design for industrialisation. Common signals include:
- Switching losses or thermal limits are blocking progress
- A prototype fails EMC or power-quality tests
- Battery, motor or grid interfaces need a robust design
- Internal teams need an independent design review
What Quality Looks Like
Reliable power electronics work begins with clear requirements for voltage, current, load behaviour, efficiency, lifetime and environmental conditions. Skilled professionals document assumptions, analyse failure modes and verify performance through simulation, measurement and controlled testing. They consider manufacturability, component availability, serviceability and protection from the first design iteration.
Collaboration in Germany
Power electronics projects often combine laboratory work, production constraints and cooperation with mechanical, software and compliance teams. Remote work suits simulation, documentation, design reviews and control development, while prototype bring-up, measurement and EMC work may require on-site access in Germany. Strong communication and precise technical records keep distributed teams aligned.
Frequently asked questions
Need clarity? These are the questions we hear most often about Power Electronics.
Power Electronics is used to convert, control and distribute electrical energy. It supports inverters, motor drives, charging systems, renewable-energy equipment, industrial power supplies and battery systems.
Power Electronics focuses on controlled energy conversion through switching devices, magnetic components and feedback systems. Conventional electrical design may centre on distribution and passive circuits, while power electronics must also manage switching losses, control stability, heat and electromagnetic interference.
A strong Power Electronics specialist often combines analogue and digital circuit design with embedded control, PCB layout, thermal analysis and EMC testing. Experience with battery systems, motor control, functional safety or grid interfaces can be important depending on the product.
The right Power Electronics professional depends on the design risk and project stage, not on a fixed career threshold. A prototype review may need focused converter expertise, while a production product benefits from experience across requirements, simulation, testing, compliance and manufacturing transfer.
Power Electronics work can often be handled remotely for simulation, circuit reviews, control development and documentation. Laboratory measurements, prototype assembly, EMC troubleshooting and production support usually require access to equipment, so hybrid collaboration is common in Germany.
Ask the Power Electronics specialist to explain a comparable converter, inverter or drive design and the trade-offs behind key choices. Review how they define test conditions, calculate losses, handle protection and document evidence rather than judging only the schematic or simulation result.
Power Electronics is often compared with electromechanical solutions, linear regulation or packaged power modules. The choice depends on efficiency, controllability, noise, thermal limits, cost, service requirements and the available space in the final system.
A Power Electronics freelancer may deliver an architecture, schematics, component selections, simulation models, PCB guidance, control specifications and test plans. Depending on the engagement, the work can also include prototype bring-up, failure analysis, design verification and production documentation.
The average hourly rate of freelancers in Germany who have used Power Electronics in their recent projects is 114 €, which corresponds to a daily rate of about 913 € based on an 8-hour working day.
Of the freelancers in Germany who have used Power Electronics in their recent projects, 95% hold at least a Bachelor's degree, 64% hold at least a Master's degree, and 18% hold a doctorate.
On average, freelancers in Germany who have used Power Electronics in their recent projects have 22 years of professional experience, with a single engagement typically lasting around 2.8 years.
The most common languages among freelancers in Germany who have used Power Electronics in their recent projects are German (96%), English (92%), and French (20%).
The most common industries among freelancers in Germany who have used Power Electronics in their recent projects are Manufacturing (80%), Automotive (76%), and Energy (36%).
The most common business areas among freelancers in Germany who have used Power Electronics in their recent projects are Product Development (100%), Quality Assurance (80%), and Research and Development (72%).
Main locations of FRATCH Experts, who have recently used Power Electronics
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
