Electromagnetic Compatibility Experts in Germany

• Led the hardware development and validation of a safety-critical 400-V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in compliance with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-country EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.

• Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) rework, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.

• End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field-of-view limits, and thermal and voltage-related ECU state machines. Skilled use of a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.

• Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.

• Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.

• Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurements. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.

• Successfully delivered full engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept to system integration and validation, technical documentation, supplier coordination, and user training.

Technical writer at a special-purpose machine manufacturer, implementing the requirements of the EU Machinery Regulation in the technical documentation and moderating FMEAs. Role: Technical Writer and FMEA Moderator

Manufacturer of medical devices

• Creation and further development of quality management systems according to EN ISO 13485
• Gap analysis of existing quality management systems according to ISO 13485
• Consulting and support in customer projects in the field of quality management and
• Proof of regulatory compliance for medical devices of all risk classes
• Preparation of technical documentation according to MDR
• Gap analysis of the risk management file according to ISO 14971:2019

• Standards research "product- / project-related for speed-controlled pumps".
• Supporting internal development departments with standards-related questions nationally and internationally.
• Creating and maintaining internal standards and test plans.
• Deriving technical requirements from normative specifications.
• Cooperation with authorities.
• Coordination with associations and organizations/authorities (VDE, UL, notified Body EMC-Test).

PCB design with Altium, MCU Programming, Prototyping

• Analyze subject-specific requirements, taking the project objectives into account (using Doors as a tool)
• Derive work packages and define milestones based on the previous requirements analysis
• Create and continuously update the project plan using MS Project
• Coordinate with departments and series production industrialization
• Review and track milestones and work packages (MS Project, JIRA confluence)
• Prepare monthly presentations for management on the project, project planning, status, and outlook
• Coordinate prototype builds and tests as part of Design Verification
• Document all project activities, including all required forecasts, analyses, recommendations, and plans (A-Spice compliant)
• Coordinate with sites in China and Thailand

• Sizing of electric drive systems for automated transport systems (AMR/AGV)

• Selection and validation of electrical and mechatronic components (BLDC motors & controllers, sensors, batteries) considering system requirements and operating conditions

• Integration of electric drive systems into automated transport systems (AMR/AGV) and ensuring functionality

• Analysis and correction of malfunctions in existing electrical systems

• Design of low-voltage networks (ELV) and implementation of relevant norms and standards (IEC, DIN)

• iShuttle 5.0: Optimization of the drive system of an autonomous transport shuttle with a lifting capacity of up to 4.4 tons

• iShuttle 6.0: Selection and integration of a drive system for an autonomous transport shuttle with a lifting capacity of up to 5.5 tons

• Main interface between customer, stakeholders and internal cross-functional teams (software, hardware, mechanical and suppliers)
• Ticket management of internal and customer problems using Jira
• Lead pre-analysis team to conduct first analysis and assignments of tickets to the responsible person and/or departments
• Define the interfaces of the problem resolution management process to engineering, change-request management and project management processes
• Facilitate regular meetings to track root-cause analysis and problem resolutions
• Monitor project progress and identify deviations in time, scope, cost and quality
• Lead projects through all quality gates and milestones until SOP
• Forecast, resource planning, controlling and cost estimation for running projects, new RFQs and customer changes
• Weekly reporting of project status to the Program Director

• Preparation of data for creating masks for the manufacture of semiconductor chips.

• Web development with Blazor
• Two-factor authentication for Blazor applications
• Uploading and downloading files
• Bug fixes for existing applications
• Programming interfaces
• Integration of third-party tools and technologies
• Creation of developer tests (unit tests)

• Modification and redesign of the software for a series component
• Review of the software concept and extension of functionality
• Modification of software functions for DC motor control
• Hardware: ARM STM32G474, CAN bus, Lauterbach T32
• Software: Microsoft Visual Studio Code

• Technical leadership of the Validation and Prototyping departments
• Design, planning and coordination of electrical and mechanical validation according to railway standard EN50155, EMC standard EN50121 and special validations such as Accelerated Life Testing
• Design, planning and coordination of validations for ANNAX China
• Requirements engineering for test execution
• Optimization of new projects through error analysis, documentation and participation in the continuous improvement process
• FMEA co-moderator during the design phase

• Development of control units for the automotive industry incl. embedded software
• CAN bus, Vector Tools, CANoe
• Support of the development process according to ISO 26262
• Ensuring cyber security standards:
• Key exchange (PKI) between vehicle and control units
• Hardware Security Module (HSM)
• Communication with external service providers (international)
• Development (PCB) of measuring adapters, statistical analysis of sensors
• IoT and embedded software development, backend administration