
Printed Circuit Board Experts in Germany
matched in minutes by AIHire experts who design multilayer boards, prepare manufacturing files and solve signal-integrity or thermal challenges across embedded, industrial and automotive projects. FRATCH connects you with vetted, available freelancers through fast, precise AI matching.
Meet FRATCH Experts in Germany, who have recently used Printed Circuit Board
Ina H.
Last position:
Co-Founder and Prokuristin at HH2E AG
As Co-Founder, I have played a key role in positioning HH2E, in just four years, as a pioneer in Germany’s green hydrogen and green heat sector. HH2E aims to decarbonise industry and mobility by supplying green process steam to industrial parks, distributing green hydrogen via the newly designated hydrogen core network, and producing hydrogen-based green fuels. HH2E is leading the way with
- a four-gigawatt project pipeline
- including a 500 MW initiative already secured under the Federal Emission Control Act (BImSchG)
- all projects strategically located near the hydrogen core network
- over 600 million euros secured in financing
- a total project volume exceeding four billion euros.
I play a pivotal role in building the company through
Operational Set-up and Organizational Development:
- Designing HH2E AG’s agile structure and process organization
- Leading personnel selection, capacity planning, and personnel development, including for HH2E’s management team
and shaping the company’s strategy to decarbonize industry and mobility through the supply of green heat and hydrogen, while designing its
Operating Philosophy and business model:
- Designing the operational framework, business model, and technical and commercial plant management approach for HH2E plants
- Optimizing the value chain from electricity procurement to hydrogen and heat production.
I drive the development of our project pipeline through
Project Development and Project Management:
- Identifying, qualifying, and developing locations for HH2E plants
- Building relationships with private and public stakeholders at HH2E plant sites
- Securing critical infrastructure (land, electricity, water, gas) for HH2E plants
- Evaluating political and institutional funding opportunities and successfully securing funding for HH2E plants
- Leading project management for HH2E plants through to the first investment decision
- Managing escalation processes across all project teams at HH2E plant sites
Additionally, I take responsibility for the optimal technology mix—incorporating electrolyzers, battery storage, and heat storage systems—through
Technology and Engineering:
- Overseeing the technological design, system integration, and process engineering of HH2E plants
- Selecting and managing planning partners for engineering services
- Commissioning and supervising feasibility studies, FEED, approval planning, and detailed engineering
- Identifying key components for HH2E plants, and evaluating and selecting suppliers
- Building and maintaining international and national supplier relationships, and procuring main components (electrolysis, battery storage, heat storage, power system, controls) for HH2E plants
and helping shape national green hydrogen and RFNBO regulations through
Public Presentation:
- Representing HH2E AG in political and public spheres through involvement in associations and participation in industry conferences.
Marc B.
Last position:
Technical Solution Designer at Diverse
Analyzing existing logistics processes, consulting and product management for the OTTO group.
Fred K.
Last position:
Project Manager Digital Restructuring at Northrop Grumman LITEF GmbH
Assignment focus: Leading digital restructuring in a highly regulated Defence and Aerospace environment. Focus areas: improving data flows and data quality, introducing paperless data collection in production, integrating machine data for automatic SPC calculation and process control, as well as cybersecurity analyses.
Main objectives:
- Analyze, structure and improve data flows and data quality in production
- Introduce paperless data collection in manufacturing areas
- Integrate machine data for automatic SPC data calculation and process control
- Implement digital restructuring while meeting regulatory requirements in the Defence environment
Measures and results:
- Analyzed and structured existing production data flows as a basis for control and reporting
- Established mechanisms to ensure data quality and availability across manufacturing areas
- Introduced paperless data collection in production — replacing manual and paper-based processes
- Integrated machine data for automatic SPC data calculation (control charts, Cp/Cpk) and real-time process control
- Conducted cybersecurity analyses in the production and IT environments
Area of responsibility: Project management for digital restructuring, paperless production, data management and data quality in a highly regulated Defence and Aerospace environment.
Eduard H.
Last position:
Founder & Technical Lead | Enterprise Data Quality API at ADDRESSA
Built and scaled a high-performance enterprise API for real-time address validation and data quality with sub-second latency and 99.9 % availability.
Designed and integrated the solution into e-commerce, checkout, and logistics processes of leading European companies. Reduced delivery errors and shipping costs through automated data correction and precise data validation.
End-to-end responsibility for product strategy, technical architecture, software development, enterprise customers, operations, and GDPR-compliant data processing. Combined AI-native engineering workflows, Python, SQL, API integration, data quality, and workflow automation.
Paul P.
Last position:
Self-Employed Consultant – Industry/ Embedded/ IoT at Self-employed
Consulting and support in sales/business/technology/development/marketing:
- Sales, key account management
- Business development, business/company development
- Partner management
- Program/project management
- Product management & marketing
- Technical marketing, content marketing
- New business, innovation and technologies
Until July /2021, worked as an advisor and consultant for Mixed Mode in key account management, project management and business development.
From Q3/2021, successfully delivered various client projects in business development, company development, consulting, coaching, technical content management, sales and marketing:
- EMS service provider and PCB test house, inspection systems: Revised the company portfolio and its presentation. Integrated specialized distribution for optical inspection systems from Japan: content management, marketing, communication, web, sales automation, lead generation
- Full-service marketing agency – technology marketing for industry: Expanded the existing B2B and B2C marketing portfolio to include industry and technology topics: content management, presentation and positioning for “Technical Marketing”, web, target market and customer analysis, lead automation, consulting
- Software product manufacturer & software development in the field of security for Embedded & IoT: Company positioning and portfolio definition for an IoT and Embedded Security company with a SaaS solution for IoT Device Management: Building a partner network to offer complete Embedded/IoT security solutions, technical content, company positioning and portfolio definition, strategy & planning, target market and customer analysis, product marketing/USPs for the “IoT-Suite” Security Device Management Tool, standards and regulations for cyber resilience (e.g. CRA, NIS2, RED), web content, SEO, management of marketing and sales agencies, CRM, sales, presentations, trade fairs, conferences, company webinars & events
- Software engineering service provider/system integrator for IoT, Embedded, web, mobile and desktop applications: Business development, content creation, customer acquisition and sales
- Manufacturer of memory products with security features as an add-on: Memory products in standard form factors (SD, CF, SSD...) are enhanced with security modules such as HSM, TPM or Secure Elements, offering users secure data storage, transfer and access. Also of interest as an upgrade or retrofit solution to meet upcoming new regulations and requirements for cybersecurity such as CRA, RED and NIS2. Business & New Business Development for the “Embedded IoT Solutions & Security” division, sales & marketing. Expanded the business from semiconductors alone to include security solutions and services. Liaison between management, marketing, sales and product management. Building business partners, technology partners, system integrators and resellers in the Embedded, IoT, OT and IT sectors. Creating reference designs/demos/lighthouse cases and proofs of concept for cross-selling and reference selling. Co-marketing with security partners. Technical content creation for web, sales and marketing, webinars, social media, etc. Networking, attending trade fairs, conferences and events. Lead generation, qualification, follow-up and conversion to customers. Product definition, USPs, features. Competitor analysis, market positioning, target markets – strategy, concept and actions – Go To Market.
- Marketing agency group with sales and business consulting: Consulting for companies on repositioning, market analysis and market entry, Go2Market concepts, customer development and growth, new customer acquisition, lead generation and management, campaign planning and delivery (web, email, social media, phone outreach personally or with an AI voice assistant, webinars...). Preparing and managing customer product data for PIM Product Information and DAM Data Asset Management systems. Focus on customers in the industrial and technology sectors with products and services that require explanation.
Nazif K.
Last position:
Self Employed at Self Employed
Providing services to cover the complete electronic product design process.
- Requirement validation
- Creating / re-writing / breaking down requirements
- Requirement analysis and functional partitioning
- Component selection and risk assessment
- Component library management
- Schematics design
- Safety and reliability assessment
- HDI PCB design
- Design review against requirements
- Readiness for manufacturing review
- Readiness for testing review
- Readiness for verification review
High Power Density BLDC Driver Module with MCU as controller:
- PCB module with heatsink
- L47mm x W36mm x H19mm compact sizes
- Nominal input voltage: 48V
- Sinusoidal continuous RMS current: 50A
- STO, Digital input and outputs
- Analog signal inputs
- CANBUS interface
- RS232/RS485 interface
- Multilayer FR4 design (No aluminum PCB)
Integrated Mission Computer & Smart 5kW PDU
- Featuring 3 different current limits, in total 63 power outputs
- Featuring programmable current amplitude and on-time, in total 84 CC power outputs.
- Ethernet, CANBUS, MIL-BUS, RS485 communication interfaces
- In total 120 Open-Short, Open-GND, 28V-GND types discrete I/O interfaces
- BIT and CIT solutions to monitor output voltage, current and board temperature
Muhammad J.
Last position:
Embedded Linux Intern – IoT Sensor Prototype Development at DHL
- Built a modular C++ 20 embedded Linux acquisition system on a Raspberry Pi, synchronizing IMU and dual-camera data streams to sub-millisecond accuracy.
- Integrated retro-reflective and contrast sensors to trigger acquisition and detect gaps between sorter rails.
- Implemented SPI & I2C sensor communication, GPIO interrupt handling with libgpiod, and CSV & JSON output.
- Designed a multi-threaded acquisition pipeline and an SPSC queue between acquisition and writer threads.
- Built a Python/HTML/CSS based web-server and validated the prototype in a DHL warehouse for defect detection.
- Documented software behavior, configuration, and results for maintainable handover and further development.
Furqan M.
Last position:
Epteck GmbH
- Contributing to embedded hardware development.
- Designing schematics and multilayer PCB layouts using Altium Designer.
- Applying signal and power integrity principles.
- Performing component selection, technical evaluation, footprint development, and design verification.
- Integrating and testing microcontroller peripherals and communication interfaces, including PC, SPI, UART, CAN, and USB, to support reliable system communication and hardware validation.
Valentin R.
Last position:
Freelance Hardware Development Engineer at Swarm Biotactics
PCB design with Altium, MCU Programming, Prototyping
Abdelrahman H.
Last position:
Research Assistant (WHK), FPGA Development – BrassSense Project at HAW Hamburg / Prof. Peter Schulz
- Real-time tone detection on FPGA (~20 ms latency target) using a filter bank architecture with a fuzzy-logic decision stage, avoiding FFT due to its window-length/frequency-resolution tradeoff.
- Responsible for system integration and architecture.
Ali B.
Last position:
Test Technician / Electronics Technician at Fresenius Medical Care Deutschland GmbH
Testing and calibration of electronic assemblies as well as technical fault analysis.
Reginald L.
Last position:
ERP System Redesign (web-based)
PHP and React redesign of a web-based ERP system.
- Development of the header and parts of the navigation
- Development of various modules in React, such as a calendar, chat and various tables
Anuja C.
Last position:
Embedded Software Engineer at Digital Core Technology
- Designed and implemented embedded firmware in C/C++ for ARM-based microcontrollers and SoCs (STM32, NXP, Infineon)
- Worked across bare-metal, FreeRTOS, and Embedded Linux environments, contributing to BSP-level functionality, driver bring-up, and system integration
- Built, configured, and validated Embedded Linux systems using Yocto, including image build, boot validation, and runtime debugging
- Developed and executed unit, integration, and system-level tests, including HIL and SIL test scenarios on real hardware and simulated environments
- Created Python and Bash scripts to automate build, test execution, simulation runs, and reporting within CI/CD pipelines (Jenkins, GitLab CI)
- Designed test cases from software and system-level requirements, covering normal operation, edge cases, and failure scenarios
- Performed low-level debugging using JTAG/GDB, analyzing boot issues, timing problems, interrupts, and peripheral behavior
- Developed and validated communication interfaces including UART, SPI, I2C, CAN using logs and external measurement tools
- Used simulation and virtual test environments to validate software behavior prior to hardware availability
- Read and interpreted hardware schematics to understand signal routing, pin multiplexing, and peripheral connections
- Supported PCB design and review activities using Altium tool, assisting with component selection, pin mapping, and bring-up readiness
- Collaborated with cross-functional hardware, firmware, and system teams to clarify requirements, document assumptions, and improve overall test coverage
- Developed web interfaces using HTML, CSS, and JavaScript (ES6) and basic REST API development with Node.js
- Experience testing web applications and building UI automation frameworks using Selenium WebDriver
Alexander S.
Last position:
AI Consultant for AI Voice Bot System at Rudolf Hörmann GmbH & Co.KG
- Consultant for system architecture, AI agents & integration, coach for data & process logic, Graph-RAG approaches, security and data protection.
- On-premise AI solutions with high compliance and performance requirements.
- Architecture decisions, operational setup, strategic prioritization & deployment.
- Technologies: LiveKit JS SDK, LiveKit Agents, Web Audio API, JS, AudioWorklet, Loki, vLLM, Zscaler, Docker, Neo4j, MySQL, Python.
- Models: GPT-OSS 20B, Whisper large v3 turbo, Qwen3-TTS.
Eugen P.
Last position:
Interim Project Manager / Program Management / Operational Excellence
Discover over 15,000 top freelancers
Statistics of experts using Printed Circuit Board
Aggregated from the professional profiles of matched freelancers.
Experience
20 years

Position duration
3.8 years

Positions per freelancer
11

Top business areas
Product Development, Quality Assurance, Information Technology

Top industries
Manufacturing, Automotive, Information Technology

Certification focus areas
Quality Assurance, Information Technology, Product Development
Bachelor's degree or higher
89%
Master's degree or higher
69%
Doctorate
10%

Certifications per freelancer
2

Most common languages
German, English, French

Speak two or more languages
97%
Based on our profile pool as of 18 Nov 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using Printed Circuit Board
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Printed Circuit Board experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (87%)
- Automotive (54%)
- Information Technology (54%)
- Energy (33%)
- Healthcare (32%)
- Education (28%)
- Aerospace and Defense (25%)
- Professional Services (23%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
What a PCB does
A Printed Circuit Board, commonly called a PCB, mechanically supports electronic components and connects them through copper traces, vias and conductive layers. It can carry power, digital signals, analogue circuits or high-frequency links. The board becomes the physical foundation of products such as control units, sensors, medical devices, industrial equipment and consumer electronics.
Design and layout
PCB work covers schematic capture, component selection, placement and routing. Professionals balance electrical performance with assembly, serviceability and production constraints. They define layer stacks, impedance rules, clearances, grounding concepts and thermal paths before releasing a design for manufacturing.
- Create schematics and board layouts
- Route controlled-impedance and high-speed signals
- Plan power distribution and thermal management
- Prepare Gerber, drill and pick-and-place files
Tools and ecosystem
Common workflows use Altium Designer, KiCad, Cadence OrCAD or Allegro, Siemens Xpedition and Autodesk Fusion electronics tools. Strong specialists also work with SPICE simulation, design-rule checks, component libraries and version-controlled design data. They coordinate with embedded software, mechanical design, manufacturing and test teams.
Where companies use it
Companies bring in PCB specialists for new product development, board revisions, prototype production and manufacturing transfer. The work appears in embedded systems, robotics, renewable energy, telecommunications, automotive electronics and factory automation. In Germany, close collaboration with regional manufacturing and hardware teams may require on-site workshops, while much of the design process can run remotely.
- Move a prototype toward design for manufacture
- Replace obsolete or unavailable components
- Reduce electromagnetic interference and noise
- Adapt boards for new enclosures or interfaces
When freelance expertise helps
External professionals are useful when an internal team faces a tight product milestone, a complex board revision or a gap in high-speed, RF, power or safety-critical design knowledge. They can audit an existing layout, resolve production failures or document a board for a new supplier. Clear files, agreed review points and access to schematics make remote work effective; German or English communication can be set according to the project team.
Signs of strong professionals
The best specialists connect circuit intent with manufacturability and testability. They explain trade-offs, keep libraries and design rules controlled, and validate assumptions through simulation, review and prototype testing. Ask for evidence of comparable multilayer, mixed-signal, high-current or high-speed work, plus clear handover documentation.
- Review schematics and constraints before layout
- Check fabrication and assembly requirements
- Investigate faults with measured evidence
- Deliver editable source files and release notes
Frequently asked questions
What clients ask us most about Printed Circuit Board — answered in short.
A Printed Circuit Board connects electronic components and provides the physical structure for an electronic product. It is used in embedded controls, sensors, power equipment, communication devices, vehicles, medical products and industrial machinery.
A PCB offers repeatable connections, compact routing and easier assembly than point-to-point wiring. Point-to-point methods can suit simple prototypes or repairs, while printed boards are usually better for consistent production, complex interfaces and controlled electrical performance.
A strong Printed Circuit Board specialist often understands schematic capture, signal integrity, power integrity, EMC, thermal design and design for manufacture. Familiarity with embedded firmware, mechanical constraints, component sourcing and production testing is also valuable.
The right level depends on board complexity, risk and production volume. A simple interface board may need focused layout support, while a multilayer, high-speed, RF or safety-relevant product calls for a PCB professional who can manage constraints, reviews, prototypes and manufacturing handover.
Much Printed Circuit Board work can be completed remotely when the team shares controlled design files, component data, requirements and review procedures. On-site sessions in Germany can help with lab measurements, prototype bring-up, supplier coordination or hardware debugging.
Review comparable board examples, the specialist’s role in each project and the quality of their release documentation. Ask how they manage libraries, design rules, stackups, revisions, fabrication feedback and design reviews rather than judging a layout from appearance alone.
Bring in a PCB expert before the schematic and component choices are locked if the product has demanding speed, power, thermal or mechanical requirements. Early input can prevent routing problems, unsuitable parts and expensive board respins.
A Printed Circuit Board professional can show quality through anonymized layout samples, documented design decisions and examples of issues found during review or testing. Clear communication about constraints, measured validation and a complete editable handover are strong indicators of dependable work.
The average hourly rate of freelancers in Germany who have used Printed Circuit Board in their recent projects is 88 €, which corresponds to a daily rate of about 703 € based on an 8-hour working day.
Of the freelancers in Germany who have used Printed Circuit Board in their recent projects, 89% hold at least a Bachelor's degree, 69% hold at least a Master's degree, and 10% hold a doctorate.
On average, freelancers in Germany who have used Printed Circuit Board in their recent projects have 20 years of professional experience, with a single engagement typically lasting around 3.8 years.
The most common languages among freelancers in Germany who have used Printed Circuit Board in their recent projects are German (99%), English (97%), and French (18%).
The most common industries among freelancers in Germany who have used Printed Circuit Board in their recent projects are Manufacturing (87%), Automotive (54%), and Information Technology (54%).
The most common business areas among freelancers in Germany who have used Printed Circuit Board in their recent projects are Product Development (92%), Quality Assurance (77%), and Information Technology (66%).
Main locations of FRATCH Experts, who have recently used Printed Circuit Board
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!

Berlin
Munich