OrCAD Experts in Germany
matched in minutes with vetted, available freelance specialistsHire experts who design schematics, develop multilayer PCB layouts and prepare manufacturing documentation with OrCAD Capture and OrCAD X, matched precisely with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used OrCAD
Valentin R.
Last position:
Freelance Hardware Development Engineer at Swarm Biotactics
PCB design with Altium, MCU Programming, Prototyping
Reinhard M.
Last position:
Consultant at Infineon
- Preparation of data for creating masks for the manufacture of semiconductor chips.
Ould Aly I.
Last position:
Functional Safety Assessor at VW
- Pre-assessments and review of functional safety status for ADAS ECUs and body controller components
- Conduct functional safety audits
- Review the functional safety status of the E3 1.2 in a pre-assessment
- Document interviews
- Document findings and generate internal reports
Methods:
- ISO26262
- Automotive SPICE Level 2, 3
- Agile methods, SAFe
Tools:
- DOORS
- Enterprise Architect
- JIRA & Confluence
- IQ-FMEA
- Isograph
András B.
Last position:
Test Equipment Developer at Minebea Access Solutions
- Tested passenger car opening handle at system level integrating hardware, software and mechanics
- Built and provided complete test equipment for system testers using Arduino boards, Saleae Logic analyser, oscilloscope, multimeter, RLC meter, programmable power supplies and function generators
- Developed system testing concepts and constructed manual system test bench
- Supported system testers with hardware and software tools
- Products: BMW XNF, Rolls Royce, Audi eRing, JLR (Jaguar-Land-Rover)
Mostafa S.
Last position:
Embedded Firmware Engineer at Esko-Graphics Imaging GmbH
- FPGA code conversion from AHDL to Verilog and SystemVerilog (Altera Cyclone)
- IDE: Intel Quartus Prime (Altera)
- Code simulation: QuestaSim
- Timing analysis
Bernd G.
Last position:
Freelance Embedded and Software Engineer at Hardware-Software-Design
Specialized in embedded software development with C, C++, assembly, and designing interfaces to other applications or components
Focus areas: communication (wireless and wired), control/regulation, low-power RF applications (e.g., Bluetooth LE), IoT applications, systems for measurement/data acquisition
Development of cross-platform communication protocols based on Bluetooth Low Energy for embedded systems, embedded Linux, and mobile applications
Mobile/desktop software development with C/C++, QML, and the Qt framework; platform-specific interfaces in Java/Kotlin for Android and Objective-C/Swift for iOS
Platforms: Linux, Android OS, iOS, Windows/UWP, embedded Linux, macOS; cross-platform with Qt 6, QtQuick/QML
Multithreaded applications, UI/UX design with QtQML; experience with VxWorks and QNX
Consulting and requirements analysis from concept through design, prototyping, testing to production transfer
Expertise in desktop, mobile, and backend software, cross-platform development, embedded software, digital and mixed-signal applications, wireless modules (Bluetooth LE, WiFi), short-range device certification, Bluetooth listing
Hardware development: concept and design of electronic circuits, schematic creation (OrCAD, Fusion360), simulation (PSpice, LTSpice), layout, prototype assembly, and commissioning
Extensive project experience in PC/desktop/server software, embedded software, mobile applications, and hardware development projects (selected from 2008 to 2025)
Christian P.
Last position:
Freelance Electrical Engineer at Self-employed
- Software development for microcontrollers and PCs
- Design of architecture and modular structures based on requirements
- Implementation in programming languages (preferably C, C#)
- Documentation in source code (e.g., Doxygen) and additional documents
- Use of version control and backup systems (e.g., SVN, GitLab)
- Developer testing
- Hardware development of microcontroller-based, digital and analog circuits including power electronics
- Circuit concepts (digital and controller circuits, analog, power electronics)
- Calculation of relevant parts
- Compliance with EMC and safety guidelines
- Simulations and component selection
- PCB implementation: layout, manufacturing data, EMC and safety guidelines
- Support of prototype manufacturing and series ramp-up
- Commissioning of prototypes
- Test development: manual and automated tests, test specifications, test stand conception and equipment selection
- Requirements management and maintenance (requirements specification)
- Support of certifications and series introductions
Michael K.
Last position:
Bytec Medizintechnik
- Developed a solution for filtering heavily noisy analog sensor data by combining high-speed sampling and digital firmware filtering
- Increased the battery life of a battery-powered medical device from approx. 10 days to approx. 18 months
- Supported the overall project through the first clinical tests and TÜV approval
Discover over 15,000 top freelancers
Statistics of experts using OrCAD
Aggregated from the professional profiles of matched freelancers.
Experience
28 years
Position duration
5 years
Positions per freelancer
12
Top business areas
Information Technology, Product Development, Quality Assurance
Top industries
Manufacturing, Telecommunication, Information Technology
Certification focus areas
Information Technology, Quality Assurance, Logistics
Bachelor's degree or higher
100%
Master's degree or higher
100%
Certifications per freelancer
1
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using OrCAD
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
OrCAD experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (88%)
- Telecommunication (88%)
- Information Technology (75%)
- Automotive (50%)
- Education (50%)
- Energy (50%)
- Healthcare (38%)
- Aerospace and Defense (25%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
OrCAD at a glance
OrCAD is Cadence’s electronic design automation suite for creating circuit schematics, printed circuit board layouts and production-ready design data. It is used by electronics teams that need a controlled path from electrical concept to manufacturable board. The product family includes OrCAD Capture for schematic entry and OrCAD X for a connected design workflow.
Design work it supports
OrCAD projects cover the full board design cycle, from component selection and connectivity checks to placement, routing and release. Specialists use it for prototypes, embedded hardware, power electronics, control boards and compact commercial devices.
- Capture schematics and define electrical rules
- Place components and route multilayer boards
- Review signal, power and clearance constraints
- Produce Gerber, drill and assembly documentation
Ecosystem and tooling
Strong OrCAD work depends on more than drawing a schematic. Professionals work with symbol and footprint libraries, constraint management, design rule checks, netlist data and manufacturing outputs. They may also connect OrCAD with PSpice for simulation, Cadence libraries, PLM or version-control processes, and suppliers’ production requirements.
When companies need specialists
Freelance expertise is useful when an internal team has a board revision, an urgent prototype or a library migration without enough layout capacity. It also helps when an existing design needs cleanup before manufacture, or when a company is moving from another EDA environment.
- Convert engineering requirements into reliable schematics
- Rework legacy Capture files and component libraries
- Prepare boards for assembly and supplier handoff
- Review designs for manufacturability and compliance needs
What strong professionals deliver
A capable specialist understands circuit intent, not only OrCAD commands. They create reusable symbols and footprints, document assumptions, apply constraints consistently and verify that the released files match the approved design. Familiarity with PCB fabrication, assembly, EMC considerations and component sourcing makes reviews more practical.
Collaboration and project fit
OrCAD work can be handled remotely when files, library ownership and review rules are clearly defined. Germany-based teams may prefer local availability for lab tests, prototype reviews or supplier coordination, while distributed projects benefit from structured file exchange and regular design checkpoints. Before engagement, agree on the OrCAD edition, source-file format, library standards, outputs and approval process.
Frequently asked questions
Quick answers to the questions that come up most around OrCAD.
OrCAD is used to create electronic schematics, design printed circuit boards and prepare manufacturing documentation. Teams use OrCAD Capture for schematic entry and related Cadence tools for layout, checks and production files.
OrCAD is often chosen for its Cadence ecosystem, established library workflows and links to simulation and enterprise design processes. Altium Designer offers a broad integrated environment, while KiCad is an open-source alternative; the best choice depends on existing files, collaboration needs, licensing and manufacturing processes.
A strong OrCAD specialist should understand PCB fabrication, assembly, component libraries and design-for-manufacturing reviews. Experience with PSpice, signal or power integrity, EMC considerations and supplier data also helps when the work goes beyond basic layout.
The required depth depends on board complexity, layer structure, constraints and the condition of the source files. A simple schematic update may need focused tool knowledge, while a new product board calls for a professional who can manage libraries, placement, routing, checks and release documentation.
OrCAD projects are often suitable for remote collaboration when access to source files, libraries and review tools is arranged securely. On-site work in Germany can still be useful for lab validation, prototype troubleshooting or close coordination with hardware and manufacturing teams; German or English communication should be agreed early.
For OrCAD work, provide the current schematic and board files, approved symbols and footprints, design rules, mechanical data and the intended manufacturing outputs. A short brief should also state the board revision, target manufacturer, open issues and required review or release format.
Review whether the OrCAD deliverables are electrically consistent, manufacturable and easy to maintain. Ask the specialist to explain design rules, library choices, validation steps and release files, then inspect sample documentation or a redacted project that resembles your board type.
OrCAD migrations can expose incomplete libraries, altered net names, missing constraints or geometry that no longer matches the original board. A careful professional first maps symbols and footprints, validates connectivity, compares critical dimensions and records every conversion decision before production data is released.
The average hourly rate of freelancers in Germany who have used OrCAD in their recent projects is 101 €, which corresponds to a daily rate of about 806 € based on an 8-hour working day.
Of the freelancers in Germany who have used OrCAD in their recent projects, 100% hold at least a Bachelor's degree and 100% hold at least a Master's degree.
On average, freelancers in Germany who have used OrCAD in their recent projects have 28 years of professional experience, with a single engagement typically lasting around 5 years.
The most common languages among freelancers in Germany who have used OrCAD in their recent projects are German (100%), English (88%), and French (25%).
The most common industries among freelancers in Germany who have used OrCAD in their recent projects are Manufacturing (88%), Telecommunication (88%), and Information Technology (75%).
The most common business areas among freelancers in Germany who have used OrCAD in their recent projects are Information Technology (100%), Product Development (100%), and Quality Assurance (88%).
Main locations of FRATCH Experts, who have recently used OrCAD
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
