I Putu Gede Sukadana - Commissioning and Start-up Team Lead

Q: Where is I Putu Gede based?

I Putu Gede is based in Westminster, Congo, the Democratic Republic of the .

Q: What languages does I Putu Gede speak?

I Putu Gede speaks the following languages: Indonesian (Native), English (Advanced) .

Q: How many years of experience does I Putu Gede have?

I Putu Gede has at least 28 years of experience. During this time, I Putu Gede has worked in at least 8 different roles and for 9 different companies . The average length of individual experience is 3 years and 1 month . Note that I Putu Gede may not have shared all experience and actually has more experience.

Q: What is I Putu Gede's latest experience?

I Putu Gede's most recent position is Commissioning and Start-up Team Lead at ENI .

Q: What companies has I Putu Gede worked for in recent years?

In recent years, I Putu Gede has worked for ENI , Amec Foster Wheeler , and Qatar Petroleum .

Q: Which industries is I Putu Gede most experienced in?

I Putu Gede is most experienced in industries like Energy .

Q: Which business areas is I Putu Gede most experienced in?

I Putu Gede is most experienced in business areas like Operations , Project Management , and Quality Assurance .

Q: Which industries has I Putu Gede worked in recently?

I Putu Gede has recently worked in industries like Energy .

Q: Which business areas has I Putu Gede worked in recently?

I Putu Gede has recently worked in business areas like Operations , Quality Assurance , and Project Management .

Recommended expert

Westminster, Congo, the Democratic Republic of the

Check rate

Experience

Jan 2023 - Present

3 years 7 months

Commissioning and Start-up Team Lead

ENI

Managed commissioning and start-up activities for OPT LNG and FLNG projects in Dubai, Oman, and Congo.
Participated in technical bid evaluation (TBE) and HAZOP, reviewed and approved commissioning methodologies and checklists.
Reviewed systemization procedures, boundary limits, CCMS database population, handover schema, energization, loop checks, cause and effect tests, flushing, chemical cleaning, drying, inertization, first fill, catalyst loading, leak tests, and start-up scheduling.
Witnessed FAT for telecom, electrical, control, and process equipment; managed N₂ leak tests and purging; led pre-start-up safety review (PSSR) and early start-up readiness.
Performed dynamic tests and start-up of utility and process systems including RO, N₂ generation, inlet gas separator, fuel gas system, MRU, GSU, GDU, DPCU, liquefaction, refrigeration, boil-off gas, LNG storage and transfer, compressors, export, flash gas, and condensate systems.
Managed performance testing of critical equipment, hydrotesting, leak testing of pipelines, evaluated facility performance, and registered lessons learned.
Achievements:
Completed FAT for critical equipment in Dubai, Oman, and Sharjah.
Supported construction completion and delivered all commissioning deliverables.
Completed function tests, dynamic tests, SAT activities, electrical power generation and distribution tests, loop checks, cause and effect tests for DCS, ESD, FGS.
Completed mechanical run tests, remote start, operational sequencing, auto mode initiation for compression, N₂ generation, heating medium, water, flare, drain, and cooling systems.
Achieved hydrocarbon start-up (50–100% flowrate) for LNG treatment, flash gas, and condensate systems.
Completed 72-hour performance tests for booster and refrigeration compressors and plant acceptance tests.
Safely loaded and unloaded LNG.

Jan 2021 - Dec 2023

3 years

Brunei Darussalam

Completions & Commissioning Manager

Amec Foster Wheeler

Led commissioning and start-up for brownfield CPP rejuvenation project in Brunei, upgrading DCS, ESD, FGS, electrical distribution, HVAC, and export gas compressor systems.
Prepared systemization, QEDI database, pre-commissioning and commissioning procedures, completion sequences, critical path, milestones, and offshore strategy.
Implemented Operation Readiness and Assurance (ORA) and Flawless Project Delivery (FPD); provided shutdown window plans and maximized activity efficiency.
Witnessed FAT, static and function tests, SAT, dry, wet, dynamic commissioning, and performance testing for three export gas compressors.
Managed handover documentation, integrated outstanding action tracker, isolation schemes, safeguarding logic tests, quality assurance, technical integrity verification, and pre-start-up audits.
Ensured availability of critical, commissioning, and initial operating spares; completed training for new equipment and DCS; coordinated third-party vendors and operations support.
Achievements:
Completed operating test procedures and start-ups for brownfield areas.
Safely energized electrical distribution and completed loop tests, cause and effect, third-party interface and communication tests.
Completed flushing and N₂ leak tests; achieved 72-hour performance test for export gas compressors.

Jan 2020 - Dec 2021

2 years

Qatar

Client Commissioning Site Leader

Qatar Petroleum

Led commissioning and start-up for offshore Bul Hanine redevelopment (phase-1b) including wellhead topsides, manifold platform, PS3 modifications, flowlines, umbilicals, and pipeline.
Reviewed and commented on operating test procedures, commissioning sequences, and start-up plans; chaired offshore EPC contractor tests for pre-commissioning, hot commissioning, and handover.
Identified and ensured completion of pre-start-up audit requirements across documentation, safety, process operation, electrical, control, telecom, and training.
Achievements:
Delivered key performance indicators and witnessed electrical energization and performance tests.
Managed and witnessed DCS, ESD, FGS loop tests, cause and effect, interface/communication, and redundancy tests.
Completed N₂ leak tests, purging, hot commissioning, gas lift start-up, performance tests, and black start procedures.

Jan 2018 - Dec 2020

3 years

Jakarta, Indonesia

Completion and Commissioning Manager

Saipem

Managed pre-commissioning, commissioning, and start-up for FPSO hull, topside, living quarters, pipeline, RO system, and integrated tests with subsea and ORF.
Reviewed engineering design deliverables (sub-systems lists, ITR A/B, PIMS certificates) and developed commissioning sequence, strategy, constructability, and manpower plans.
Delivered commissioning philosophy, execution procedures, and handover plans; reviewed leak test markups, flushing, and OTPs; implemented HAZID and SIMOP risk reductions; managed MOC impacts.
Ensured PSSR, HSE risk assessments, and mitigation plans; energized electrical distribution; performed loop checks and cause and effect tests for ICSS.
Conducted hydrocarbon gas compressor tests and FPSO start-up sequences including flare ignition, receiving facilities, export compression, production ramp-up, condensate stabilization, export, and MEG regeneration.
Achievements:
Populated PIMS database and delivered systemization and markups.
Completed commissioning execution and start-up as scheduled.

Jan 2016 - Dec 2018

3 years

Indonesia

Completion and Commissioning Manager

PT Wijaya Karya

Led pre-commissioning, commissioning, and start-up for LNG plant including systemization, QEDI database, OTPs, execution plans, and milestone tracking.
Chaired commissioning team, directed tests, developed recovery plans, defined impact mitigations, and implemented ORA.
Reported progress, participated in PSSR audits, assisted operations during start-up; commissioned fuel gas, AGRU, dehydration, mercury removal, fractionation, liquefaction, and storage systems.
Tested combined cycle turbine generator and Centum 3000 control system.
Achievements:
Delivered LOSH markups, QEDI database, check/test sheets, certificates, and multiple OTPs.
Safely started up LNG plant and combined cycle generator; completed 72-hour export compressor performance test.

Jan 2014 - Dec 2016

3 years

Bojonegoro, Indonesia

Commissioning and Start-up Manager

PT Tripatra Engineering

Managed commissioning and performance tests for onshore oil and gas treatment facilities including storage, pumps, gas treatment, compression, fuel gas, lift, CO₂ injection, boilers, RO, water injection, telecom, pipelines, FSO, buildings, HVAC, and ASU.
Performed load tests and certifications for gas and steam turbine generators and distribution; conducted loop checks, cause and effect matrix tests, interface, communication, leak, and N₂He tests.
Developed pre-commissioning, commissioning, and start-up plans; set up Zenator database; monitored subsystem handovers; managed vendor mobilization; supported critical systems start-up; delivered commissioning philosophy, strategy, and specifications.
Achievements:
Populated systemization database and delivered handover procedures.
Completed dynamic commissioning procedures, load tests for generators and switchgear with government certification.
Completed DCS interconnection, ESD tests (levels 0–3), 72-hour compressor and CO₂/water injection performance tests, and first oil start-up.

Jan 2010 - Dec 2014

5 years

Balikpapan, Indonesia

Pre-Commissioning Coordinator/Leader

Total

Coordinated pre-commissioning for Sisi Nubi & Peciko and South Mahakam wellhead platform projects including subsea pipelines, CCVT, PCS, ESD, FGS, instrument calibration, PSV, SDV, BDV, pumps, and chemical systems.
Developed pre-commissioning philosophy and specifications; reviewed systemization, database setup, and procedures; monitored contractors for milestones using OPERCOM, ICAPS, and PRODOM methodologies; witnessed all discipline pre-commissioning activities.
Reported status and progress.
Achievements:
Delivered systemization, ICAPS database, check/test sheets, certificates, and pre-commissioning execution ahead of schedule.

Jan 2005 - Dec 2010

6 years

Batam, Indonesia

Engineer/Lead Mechanical Completion

McDermott International

Led mechanical completion for FPSO Esso Kipper Tuna and CPP SUTUVANG projects; served as piping engineer for LNG V project.
Managed pre-commissioning and commissioning of topside equipment including turbines, compressors, separators, chemical systems, power distribution, DCS, ESD, FGS, and instrument calibration.
Achieved MC sign-off through ITR A three-party walk-downs, punch list clearance, ITR B function tests, and OTPs; provided MC and commissioning skylines; performed cleaning, hydro/ pneumatic tests, blowing, reinstatement, function, and dynamic tests.
Achievements:
Populated PIMS database and delivered systemization and pre-commissioning procedures.
Completed pre-commissioning and offshore commissioning ahead of schedule with 0.65 productivity.

Jan 1999 - Dec 2005

7 years

Mechanical / Commissioning Engineer

NMS Labroy Group

Conducted testing for cargo gas/oil ship FPSO projects including slug catcher, pig trap, separator, condensate stabilization, export compressor, fuel gas, mooring, and ballast systems.
Reviewed technical drawings; prepared testing plans and procedures; coordinated multidisciplinary teams; managed supervisors and technicians; ensured schedules, manpower, tools, and consumables; resolved testing issues.
Achievements:
Delivered testing procedures and completed safety-critical tests for rotating, static equipment, and systems on schedule.

Industry Experience

See where this freelancer has spent most of their professional time.

Experienced in Energy.

Energy

Business Area Experience

See which departments and functions this freelancer has contributed to most.

Experienced in Operations, Project Management, and Quality Assurance.

Operations

Project Management

Quality Assurance

Summary

Over 15 years of experience in Mechanical Completion, Commissioning, Startup, and Handover. Completed Oil and Gas projects (LNG, FLNG, FPSO, Topside platforms, RO system, Pipeline, and buildings). Experienced as a client commissioning site leader (CSL) at ENI, Qatar Petroleum, and TOTAL.

Experienced as a contractor EPCC commissioning manager for four projects. Implemented working as a Team, OPERCOM methodology, quality assurance, project risk assessment, and solution. Managed commissioning and facilitated the construction, quality manager, and collaborated with engineering in determining the appropriate requirements for the equipment and plant. Completed 10 complex projects safely, effectively, met technical objectives, and within budget.

Skills

Commissioning Methodology And Strategy (Opercom)
Completions Management System (Cms)
Operation Readiness And Assurance (Ora)
Criticality Rating Assessment (Cra)
Operating Manual
Check Sheets & Procedures
Safety And Health Management System
Static & Rotating Equipment
Electrical (Power Generation, Transformer, Distribution & Ups)
Icss Control & Automation (Dcs, Esd & Fgs)
Process And Utility
Pims Database Software
Icaps Database Software
Edms (Electronic Document Management System)
Ms Project
Visio
Powerpoint
Ms Word
Excel

Languages

Indonesian

Native

English

Advanced

Education

Oct 1994 - Jun 1998

Institute of Technology Sepuluh November (ITS)

Bachelor's degree in Marine Engineering · Marine Engineering · Surabaya, Indonesia

Certifications & licenses

Operation & Control Booster Compressor

JEREH Site Training

Automation Control Commissioning & Start-up

Engineering Canada

Electrical and Power Commissioning & Start-up

Engineering Canada

Mechanical Process Commissioning & Start-up

Engineering Canada

Plant Commissioning and Start-up

Commissioning Academy

Eptw Training Level 3

Qatar Petroleum

H2s/Ba-Opito- Venture Gulf Training Centre

Gulf Training Centre

T-Bosiet Opito- Venture Gulf Training Centre

Gulf Training Centre

9 Key Elements Of Successful Plant Commissioning

Consulting, INC.-Panama

PIMS Database Software & Administrator

Omega PS Singapore

Process Engineering & Hazop

Iforbit Madyan Persada

Process-Commissioning & Balance Energy

Iforbit Madyan Persada

Advanced Interpersonal Communication

Surabaya Technika Cipta

Safeguarding Plc (PCS, ESD, And FGS)

Surabaya Training

High Voltage Electrical Safety Operational

Prosafe Binatama

Advanced Leadership & Effective Supervisory

Surabaya Training

Certification Osh Expert Of Electrical (AK3)

DEPNAKERTRANS

Instrumentation & Control (PCS/ESD/FGS)

Mairodi Mandiri

Electrical Power Distribution & Testing

JP Consultant

Pipelines & Piping Process

JP Consultant

Project Management Professional (PMP)

Surabaya Training

Multiple Training (Confine Space, Sea Survival, Working At Height And Risk And Human Factors)

Konsultrain Service

Planning Essential

Global Learn McDermott

Rotating Equipment

Fiqry Jaya Manunggal

Statistics

Experience

Total positions 9

Experience in Energy 27.5 y

Avg length 3 y 10 m

Longest experience 6 y 11 m

Global Experience

Countries worked in 3 (Indonesia, Brunei Darussalam, Qatar)

Primary country Indonesia

Expertise

Recent roles Commissioning and Start-up Team Lead, Completions & Commissioning Manager, Client Commissioning Site Leader

Main industries Energy

Main business areas Operations, Project Management, Quality Assurance

Qualifications

Highest degree Bachelor

Certifications earned 24

Profile

Created

June 2025

Last Update

June 2026

Need a freelancer? Find your match in seconds.

Try FRATCH GPT

Frequently asked questions

Have questions? Find more information here.

Where is I Putu Gede based?

I Putu Gede is based in Westminster, Congo, the Democratic Republic of the.

What languages does I Putu Gede speak?

I Putu Gede speaks the following languages: Indonesian (Native), English (Advanced).

How many years of experience does I Putu Gede have?

I Putu Gede has at least 28 years of experience. During this time, I Putu Gede has worked in at least 8 different roles and for 9 different companies. The average length of individual experience is 3 years and 1 month. Note that I Putu Gede may not have shared all experience and actually has more experience.

What roles would I Putu Gede be best suited for?

Based on recent experience, I Putu Gede would be well-suited for roles such as: Commissioning and Start-up Team Lead, Completions & Commissioning Manager, Client Commissioning Site Leader.

What is I Putu Gede's latest experience?

I Putu Gede's most recent position is Commissioning and Start-up Team Lead at ENI.

What companies has I Putu Gede worked for in recent years?

In recent years, I Putu Gede has worked for ENI, Amec Foster Wheeler, and Qatar Petroleum.

Which industries is I Putu Gede most experienced in?

I Putu Gede is most experienced in industries like Energy.

Which business areas is I Putu Gede most experienced in?

I Putu Gede is most experienced in business areas like Operations, Project Management, and Quality Assurance.

Which industries has I Putu Gede worked in recently?

I Putu Gede has recently worked in industries like Energy.

Which business areas has I Putu Gede worked in recently?

I Putu Gede has recently worked in business areas like Operations, Quality Assurance, and Project Management.

What is I Putu Gede's education?

I Putu Gede holds a Bachelor in Marine Engineering from Institute of Technology Sepuluh November (ITS).

Does I Putu Gede have any certificates?

I Putu Gede has 24 certificates. Among them, these include: Operation & Control Booster Compressor, Automation Control Commissioning & Start-up, and Electrical and Power Commissioning & Start-up.

What is the availability of I Putu Gede?

I Putu Gede is immediately available for suitable projects.

What is the rate of I Putu Gede?

I Putu Gede's rate depends on the specific project requirements. Please use the Meet button on the profile to schedule a meeting and discuss the details.