Experience
FMEA Moderator / Facilitator
Schneider Engineering
- Facilitation and training of Design-FMEA/DFMEA and Process-FMEA/PFMEA with APIS IQ-FMEA license or Plato e1ns Software including Boundary Diagram
- Facilitated projects mainly in English for Tier1 or OEM:
- Development of AI FMEA software (artificial intelligence) from 2026-05-01
- Process-FMEA seamless stainless steel tubes from 2026-02-01
- Process-FMEA high performance E-drive (Rotor + Stator) (BMW) from 2024-05-01 to 2025-03-31
- System-/Design-FMEA Industry 4.0 digitalisation product from 2022-09-01 to 2023-02-28
- Design- & Process-FMEAs locking and camera systems from 2022-09-01 to 2023-09-30
- Process-FMEAs aviation/aerospace components from 2022-09-01 to 2025-05-31
- Process-FMEA roof systems/sun roofs from 2022-01-01 to 2024-01-31
- System-/Design-FMEA steer by wire from 2022-01-01 to 2023-06-30
- Design-FMEA actuators from 2021-03-01 to 2021-08-31
- Design-FMEA drive by wire system from 2020-03-01 to 2021-12-31
- Design- and Process-FMEA dashboard/IP assembly from 2020-02-01 to 2022-10-31
- Design-FMEA high voltage connector for battery management system from 2020-03-01 to 2020-04-30
- Design-FMEA interior door panels from 2020-02-01 to 2025-04-30
- Design-FMEA domestic appliance from 2019-08-01 to 2020-02-29
- Design-FMEA cobot transmission from 2019-02-01 to 2023-12-31
- Design-FMEA E-drive from 2018-09-01 to 2019-01-31
- Design-FMEA convertible roof system (AMG) from 2018-07-01 to 2019-03-31
- Design-FMEA electrical wheel hub motor from 2017-04-01 to 2018-06-30
- Design-FMEA motorbike frame (BMW) in 2017-06-01
- External member in FMEA circle of experts of a Tier 1 from 2016-01-01 to 2019-12-31
- Design- and Process-FMEA E-axle gearbox from 2016-01-01 to 2018-06-30
- Design-FMEA seating system (AMG) from 2014-11-01 to 2014-12-31
- Design-FMEA electromechanical rolling stabilizer (BMW, Bentley, Porsche, VW) from 2014-09-01 to 2016-06-30
- Requirements analysis Li-Ion battery system from 2014-08-01 to 2014-09-30
- Further facilitation of FMEAs for car body, climatization, roof, light, fuel, gas, ignition systems, plastic moulding, heating systems, ship & stationary engines, turbochargers, reactive power controller, control units, high performance engines, mechatronical chassis actuators, e-mobility and e-drives in marine, motorbike, automotive, rail, aviation/aerospace & energy for customers such as Webasto, McLaren, Ferrari, MAN, Changan, Audi and others.
FMEA Methods Manager
Webasto AG
- Responsible for D-FMEA strategy and standardization; since April 2011 for the Business Unit Roof International
- Conducted trainings and process responsibility for FMEA and special characteristics
- Facilitated FMEAs
Specialist Methods
Webasto AG
- International process responsibility for Design-FMEA in the Division Convertible Roof & Body
- International training and coaching of methods and processes to prevent failures in product development, including requirement specification and risk analyses (system, structure, function and failure analyses, product or design FMEAs)
- Facilitated design and process FMEAs in English
Specialist Methods
Webasto AG
- Continued tasks started in the former joint venture with Pininfarina
Project Manager
Open Air Systems International GmbH
- International responsibility for FMEA in development and production of automotive convertible systems
- Project management of BMW Z4 Hardtop
Development Engineer
Webasto Vehicle Systems International GmbH
- Responsible for plastic parts, interior and electrical systems in the BMW Z4 Hardtop series development; deputy lead engineer
- Responsible for the design and launch of plastic parts for the Smart Cabrio convertible system
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Automotive, Manufacturing, Aerospace and Defense, Energy, and Information Technology.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Product Development, Quality Assurance, Project Management, and Production.
Frequently asked questions
Have questions? Find more information here.
Gerald is based in Munich, Germany and can operate in on-site, hybrid, and remote work models.
Gerald speaks the following languages: German (Native), English (Advanced), French (Intermediate), Greek (Elementary).
Gerald has at least 30 years of experience. During this time, Gerald has worked in at least 5 different roles and for 4 different companies. The average length of individual experience is 5 years and 11 months. Note that Gerald may not have shared all experience and actually has more experience.
Based on recent experience, Gerald would be well-suited for roles such as: FMEA Moderator / Facilitator, FMEA Methods Manager, Specialist Methods.
Gerald's most recent position is FMEA Moderator / Facilitator at Schneider Engineering.
In recent years, Gerald has worked for Schneider Engineering.
Gerald is most experienced in industries like Automotive, Manufacturing, and Aerospace and Defense. Gerald also has some experience in Energy and Information Technology.
Gerald is most experienced in business areas like Product Development, Quality Assurance, and Project Management. Gerald also has some experience in Production.
Gerald has recently worked in industries like Aerospace and Defense, Automotive, and Energy.
Gerald has recently worked in business areas like Product Development and Quality Assurance.
Gerald holds a Master in General Mechanical Engineering, modified from TU München.
Gerald has 3 certificates. These include: APIS IQ-FMEA license, Design for Six Sigma (DFSS) Black Belt, and FMEA Expertenworkshop (APIS IQ-FMEA).
Gerald is immediately available part-time for suitable projects.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 19 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Stephan J.
Last position:
Technical Writer at pro-beam
Technical writer at a special-purpose machine manufacturer, implementing the requirements of the EU Machinery Regulation in the technical documentation and moderating FMEAs. Role: Technical Writer and FMEA Moderator
Rüdiger S.
Last position:
Manufacturer of busbar systems for power and data transmission
- Review and assessment of the existing situation
- Identification and definition of implementation measures to close existing gaps
Daniel O.
Last position:
FMEA Moderator and Expert at Tier 1 Automotive
Creating structured item definitions as the basis for conducting FMEAs
Restructuring/optimizing existing FMEAs according to the VDA/AIAG handbook in PeakAvenue/Plato. Focus on the quality of function and failure-mode definitions
Adding functions and failure modes
Revising the risk analysis. Adding and rating prevention and detection measures
Developing a framework for improved tracking of measures
Team training
Improving FMEA, with a focus on early failure prevention / Early Failure Mode Avoidance
Successfully conducting customer reviews
Gerd G.
Last position:
Head of Quality Management and QM Taskforce at AMG/Thyssen Automobiltechnik
- Taking over daily quality tasks
- Improving the body surface in the manufacturing process
- Validating measures to improve quality internally and for supplier parts
- De-escalation with DAG/AMG customers in Q-Help 3, aiming for standard supply
- Disciplinary and technical management of 12 employees
- Reorganizing QM tasks and responsibilities
Thomas H.
Last position:
Functional Safety Manager & Engineer at SEG Automotive
- Functional Safety Engineer & Manager according to ISO 26262 for integrated e-motor inverter 48V, ASIL-C / D
- Functional and technical safety concept, FMEDA, FTA, safety case for series product approval
Thomas A.
Last position:
Interim Management at Vincorion Power Systems GmbH
- Process and project management to optimize products and development processes for energy systems
- Technical risk management
- Requirements engineering and system architecture
- System FMEA of power generator units and energy storage modules aiming for generic structures
- Claims management according to Section 313 of the German Civil Code
- Regulatory environment: military and NATO standards, AQAP, VG norms
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a FMEA Moderator / Facilitator
Nearby freelancers
Professionals working in or nearby Munich, Germany

