SolidWorks Experts in Germany
in minutes from over 15,000 CVs with the power of AI.Hire experts who design parts, assemblies, and sheet metal models in SolidWorks, prepare drawings for production, and support simulation or PDM workflows. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used SolidWorks
Andreas Winters
Last position:
Enterprise Architect at Own development / IP of CAMCO Engineering UG
UEF 3.0 · Semantic Government Overlay (SGO) · Autonomous Systems (UAS / dual use)
- Designed: Semantic Government Overlay (SGO) – AI-guided administration without replacing existing specialist procedures. Read-only semantic layer over registers and specialist processes based on the Federal Information Management (FIM). Decision authority remains with the case worker (architecture principle).
- Developed: Reference architecture with source-backed, derived statements (Executable Ontologies OWL/RDF/SHACL). Technically guaranteed purpose limitation and no-write-path principle in specialist data – auditable, without a central data pool.
- Anchored: Regulation as a design principle: EU AI Act (high-risk obligations for public-sector AI, fundamental rights impact assessment under Art. 27), GDPR, NIS2, and administrative automation limits (§ 35a VwVfG, § 31a SGB X) as technical control points in the architecture.
- Created: Methodical tool for pilot organizations: data pipeline assessment (phase 0), compliance blueprint, and management summary as a decision-ready package for public administration.
- Specified: UEF 3.0 as a successor architecture to TOGAF – decision paper, canonical ontology, six-layer architecture, read/actuate boundary, federation registry, terminology concordance, and release delta as a closed specification status.
- Architected: AI-native mission OS for autonomous UAS and ground robotics as a tactical layer on top of a separately approved autopilot. Run-time assurance according to ASTM F3269-21 (Simplex pattern): the verified safety controller keeps authority, the AI function provides suggestions.
- Designed: Three-tier architecture – Tier 0 autopilot with 650 Hz flight control on RTOS, Tier 1 AI OS with semantic world model and multi-agent cluster, Tier 2 swarm and ground mesh. Zenoh as the primary fabric, MAVLink as the only authenticated command path (single writer). Result: graceful degradation – loss of the mission, not of the aircraft.
- Secured: Two-gate chain on the read/actuate boundary – governance gate (can-question: AI Act risk class per actuation, enforced human oversight under Art. 14, immutable log) before the RTA safety monitor (is-it-correct question: flight envelope, geofence, energy reserve) with revert to the baseline controller.
- Anchored: Dual-use architecture with common core and build-time fork instead of runtime switch. Three separate legal levels: civil variant – UAS under the EASA Basic Regulation (EU) 2018/1139 with the limited applicability under Art. 2(2) of the AI Act, ground robotics under the Machinery Regulation 2023/1230 with the full high-risk obligation chain, Cyber Resilience Act for both; unarmed carrier variant as defense material under AWG/AWV and Dual-Use Regulation 2021/821 (BAFA approval); armed variant under KrWaffKontrG. Each variant lives under exactly one dominant legal regime. Evidence base: AI BOM, SBOM, and complete data lineage.
- Analyzed: System analysis and realignment of grown engineering system landscapes. Approach concept for consolidation without migration – semantic layer over the existing sources instead of data transfer. Result: decision-ready implementation concept including an evaluation model for the target architecture.
Josef Ezechias
Last position:
Development service provider, mechanical engineering, design, calculation, certified project management at CAE Consulting Engineering GMBH
I am a development service provider in mechanical engineering with experience as interim assignment for all functional areas designer, development engineer design manager development manager calculation engineer, FEM, MKS, CFD, vibrations, kinematics, dynamics, statics certified project manager according to IHK industry standard, patent engineering – invention exploitation technical programmer / MATLAB, MATHEMATICA, MAPLE, MATHCAD technical managing director interim manager
[link]
[link]
Start: by agreement, based on your wishes and needs, fully flexible, permanent or fixed-term, temporary work, … etc. Compensation: within your planned budget for the position, by agreement
Please email, send references, certificates, CAD, FEM, MKS, CFD, project management, innovation proofs - patents ... etc.
Marcel Oelschläger
Last position:
Senior UX Designer | Redesign of a Complex B2B Risk Management Platform at Schleupen SE
trategic Requirements Management: Steered user-centric product development for highly complex analytical platforms in close coordination with Product Owners.
Team Enablement: Provided technical supervision and UX alignment across multiple development teams to ensure consistent implementation.
Translation of Requirements: Translated complex business logic into intuitive, user-centric concepts and workflows along the entire customer journey.
End-to-End Design: Led ideation, conceptualization, and UI design for UX projects, accounting for cross-functional requirements.
Quality Assurance: Ensured strict adherence to and verification of usability standards and web accessibility (WCAG) within a B2B context.
Stakeholder Management: Confidently presented and defended design solutions to senior management and specialized departments.
Cross-functional Collaboration: Acted as the primary interface between Product, Engineering, and Business to resolve conflicting objectives within the design process.
Stephan Fritsch
Last position:
Consultant at Toolmaking
The project covered the introduction of SAP S/4HANA including EWM. The customer makes tools for the international market, where 300 production orders and 2,000 shipments need to be processed every day. The project started with the "Explore phase", where the target business and SAP processes were defined, and ended with reaching the productivity goals with S/4HANA. My role was key user trainer and optimizing the live processes.
Annette Keller
Last position:
Parr Engineering & Prüfstandtechnik
- Planning new installation of relocated equipment
- Industry: Parr Engineering & Test Bench Technology
- End customer: Bosch Brazil
- Planning installation at a new site
Gregor Pestsov
Last position:
Engineering Data Management Project Manager
Technical and commercial risk assessment for an investment project in the hardware sector (scaling potential, liability risks, operational processes) Process consulting for two SMEs in the engineering environment, focusing on workflow digitization, PLM
Rafal Kaniecki
Last position:
Development Engineer at Hexagon Purus
- CAD system: SolidWorks 2021
- PDM database: HXP SolidWorks
- Product: mobile hydrogen refueling station
- Handling and implementing change requests
- Independently developing products for new applications
- Reviewing and approving production and assembly drawings
- Providing technical support to engineering service providers
- Collaborating closely with purchasing and quality teams
- Developing and achieving cost reduction goals
- Planning and executing concept validations
- Independently creating solution proposals and technical concepts for new ideas
- Establishing and maintaining supplier relationships
Cedric Tiogo
Last position:
B2B Freelance Design Engineer for Special-Purpose Machinery at FEM-Composites GmbH
- Cost estimation for a hydraulic system, taking into account the costs over the entire product life cycle and optimizing the technical specifications.
Hans-Jürgen Becker
Last position:
Freelance Technician at FlexLink Systems GmbH
- Plant design in conveyor technology
- Engineering and design of conveyors for the automotive industry / battery transport
- Execution, CAD: AutoCAD Inventor 2019 3D + Vault
Mauricio Godinez
Last position:
Design Engineer at Butting CryoTech GmbH
- Creation of complete 3D designs and design drawings
- Evaluation of requirement specifications and customer specifications
- Execution of partial steps in technical work preparation according to specifications and documents, including project support
- Contact person for internal and external customers in design projects
- Design and calculation of piping and components for cryogenic media and low-temperature applications
- Support with finite element calculations
Celestin Fayet
Last position:
Project Manager & Technical Project Lead at Faycestar-Engineering
- In this role, I led a funded development and prototype project with an external partner.
- I structured processes for time, budget and risk control.
- I coordinated alignments and reports with all stakeholders.
- I systematically prepared the next project phases up to pilot and planned scaling.
Andreas Kälber
Last position:
Project Manager at Winkelmann Building+Industry / Reflex Winkelmann
As part of a greenfield project, a new production plant is being built in Slovakia to produce industrial media storage for OEMs and distributors once completed.
Procurement and industrialization of production equipment for prefabrication.
Design, procurement, installation and integration of complete production lines based on stamping, forming and welding technology with integrated, labor-reducing processes.
Establishment of a production environment under strategic aspects according to the latest state of the art.
Overall and continuous communication with the entire greenfield team, adjacent departments and plant and executive management.
Development of concepts together with key suppliers and identification of ratio potentials along manufacturing process chains using value stream analyses.
Collection, assessment and application of process data such as throughput times, manufacturing times, setup times, wait and idle times using time and multimoment studies as well as surveys.
Forward-looking design of production systems and processes with the goal of implementing automated and competitive process solutions as part of comprehensive supply chain management.
Planning of production workflows, definition of manufacturing methods, design of the overall layout and workstations.
Determination and recording of process cost rates, overhead rates, cost evaluation of production processes, machine hourly rates, depreciation as well as expected share of claims and rework costs to optimize manufacturing costs.
Continuous optimizations of product designs for their adaptation into automation-oriented production environments until the plant's SOP.
Multi-project management for the engineering, design, procurement, installation and process integration of all relevant trades with respect to plant engineering, lifting equipment, production equipment and QA installations.
Ongoing establishment of an overall concept in constructive, plant engineering, logistical, IT and QA aspects.
Martin Mittermeyer
Last position:
Requirements Engineer at MCM Modern Engineering UG HB
- Analysis of the current process
- Development of the target processes
- Support for the implementation of improvements in an SAP-enabled program
- Simplification of customer contact initiation
- Streamlining internal processes through automated real-time verification of claim relevance
- Creation of use cases
Oleksii Kvasnikov
Last position:
Software developer (freelance) at Sasse Elektronik GmbH
- Built custom Yocto Linux image with Docker support (NXP i.MX 6ULL)
- Developed distributed Python application (web interface, gas/temp control)
- Designed multiple docker containers for production and development
- Wrote documentation per IEC 62304
Mohsen Najah
Last position:
Freelance CAD Designer at Thielmann Ucon GmbH
- Design of an IBC container unloading station
- Creation of manufacturing and detail drawings
- Support for the purchasing team
Discover over 15,000 top freelancers
Statistics of experts using SolidWorks
Aggregated from the professional profiles of matched freelancers.
Experience
23 years
Position duration
5.8 years
Positions per freelancer
11
Top business areas
Product Development, Project Management, Quality Assurance
Top industries
Manufacturing, Automotive, Energy
Certification focus areas
Product Development, Quality Assurance, Operations
Bachelor's degree or higher
85%
Master's degree or higher
49%
Doctorate
9%
Certifications per freelancer
2
Most common languages
German, English, French
Speak two or more languages
97%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using SolidWorks
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
What it covers SolidWorks is a 3D CAD system used to create parts, assemblies, and manufacturing drawings. Companies use it to turn product ideas into clear models that can be reviewed, changed, and sent into production. Many teams also use SOLIDWORKS for prototypes, tooling, and technical documentation.
Typical work
- Parametric part and assembly modeling
- Sheet metal, weldments, and surfaces
- Drawing creation with dimensions and tolerances
- Design changes, revisions, and model cleanup
- File preparation for suppliers and CNC partners
Ecosystem skills Strong specialists know more than the core CAD tool. They often work with SolidWorks PDM, simulation, drawing standards, BOMs, and neutral file formats such as STEP or IGES. In Germany, they also need to fit into engineering teams, supplier reviews, and clear German or English documentation.
When to bring in help Companies hire freelance SolidWorks experts when internal teams are busy, a product launch is close, or a model needs rescue after poor handover. They are also useful for one-off projects, legacy file updates, and short support around mechanical design tasks. This is common in machine building, industrial equipment, consumer products, and automotive supply chains.
What good experts do Good professionals model with clean feature trees, stable references, and parts that are easy to revise. They understand manufacturability, not just visuals. That means they check fit, clearances, material choices, tolerances, and drawing clarity before the design reaches the shop floor.
How projects run Some projects stay fully remote, especially for model updates, drawing work, and PDM support. On-site time can help when a company needs workshop input, prototype review, or close work with production and engineering teams. The best freelancers adapt to your review rhythm and keep changes traceable from first sketch to release.
Frequently asked questions
Curious about SolidWorks? Here are the answers that come up again and again.
SolidWorks is used to create mechanical parts, assemblies, and production drawings. Teams rely on it when they need accurate 3D models that can be checked, revised, and handed over to manufacturing or suppliers. It is especially common in product development and industrial design work.
SolidWorks is often chosen for day-to-day mechanical design because it is widely used, practical, and strong for parametric modeling. CATIA is often linked to more complex aerospace or automotive environments, while Inventor is another common option in mechanical CAD. The right choice depends on your existing files, team habits, and downstream tools.
A strong SolidWorks freelancer usually knows drawing standards, tolerancing, and how parts will be manufactured. Useful adjacent skills include sheet metal design, weldments, simulation basics, and file exchange formats such as STEP and IGES. Many companies also value experience with SolidWorks PDM and release workflows.
A SolidWorks specialist can start with limited input if the scope is clear, but better results come from product goals, manufacturing constraints, and reference files. For redesigns or model cleanup, the expert needs to understand what must stay fixed and what can change. The clearer the handover, the faster the work moves.
Yes, SolidWorks work is often done remotely, especially for modeling, drawings, and revision support. In Germany, many companies still like at least one shared review session for prototypes or production-critical changes. A good freelancer can work in English or German, depending on your team.
Look for clean model structure, clear drawings, and evidence that the person thinks about manufacturing, not only geometry. A strong SolidWorks professional explains why a design is stable, how it will be built, and what risks remain. Good references usually include similar parts, assemblies, or release work.
Yes, SolidWorks and SOLIDWORKS refer to the same product name in common use. You may also see it described as Dassault Systèmes SOLIDWORKS. When you search for specialists, all of these forms can help surface the right profile.
SolidWorks freelancers are a good fit for new product parts, assembly updates, drawing packages, and short-term design support. They also help when a company needs quick cleanup of legacy files or extra capacity before a release. For complex systems, they can support the core team without adding long-term overhead.
The average hourly rate of freelancers in Germany who have used SolidWorks in their recent projects is 83 €, which corresponds to a daily rate of about 662 € based on an 8-hour working day.
Of the freelancers in Germany who have used SolidWorks in their recent projects, 85% hold at least a Bachelor's degree, 49% hold at least a Master's degree, and 9% hold a doctorate.
On average, freelancers in Germany who have used SolidWorks in their recent projects have 23 years of professional experience, with a single engagement typically lasting around 5.8 years.
The most common languages among freelancers in Germany who have used SolidWorks in their recent projects are German (99%), English (96%), and French (23%).
The most common industries among freelancers in Germany who have used SolidWorks in their recent projects are Manufacturing (92%), Automotive (60%), and Energy (33%).
The most common business areas among freelancers in Germany who have used SolidWorks in their recent projects are Product Development (97%), Project Management (64%), and Quality Assurance (64%).
Main locations of FRATCH Experts, who have recently used SolidWorks
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin 
Munich 
Cologne 
Stuttgart Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
