LaTeX Experts in Germany
in minutes from over 15,000 CVs with the power of AI.Hire experts who create clean scientific papers, theses, technical manuals, and presentation decks in LaTeX. They work with BibTeX, Overleaf, and complex document classes to deliver reliable layouts, tables, equations, and publishing-ready PDFs, matched fast with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used LaTeX
Muhammad Tanveer Baig
Last position:
Embedded Systems Consultant / Architect | Integration and Validation Engineer / Manager at Ingenieurbüro Baig
Led the hardware development and validation of a safety-critical 400 V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in line with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-border EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.
Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) reprocessing, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.
End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field of view limits, and thermal and voltage-related ECU state machines. Used a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.
Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.
Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.
Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurement data. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.
Successfully managed complete engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept through system integration and validation to technical documentation, supplier coordination, and user training.
Michael Nelz
Last position:
Senior ML Engineer, AI Engineer at Lanxess AG
- Deployment and scaling of existing ML initiatives, including demand and cash flow forecasts.
- Building robust monitoring with mlflow for data stability, model performance, and drift detection, as well as implementing additional ML use cases.
- Further development of an Agentic AI chatbot for transparent and easy-to-understand model explanations.
Mirza Klimenta
Last position:
Agentic AI for a DeepResearch project at Freelance
- Created a multi-agentic system supported by a knowledge graph to automate drafting of research papers
- Used multiple experts (OpenAI models) collaborating during document drafting
- Extracted useful information from the knowledge graph
- Technologies: LangChain, LangGraph, Smolagents, LlamaIndex, dspy
- Infrastructure: Terraform and GitHub Actions (CI/CD) on AWS
- Deployed initial application as a Streamlit app
Shanna Tellaev
Last position:
Problem Resolution Manager at CARIAD SE (VW AG), formerly CARMEQ GmbH (VW AG)
- Automotive SPICE®: all assessments fully achieved
- Agile transformation: V-model → SAFe successfully implemented
- Series release: on-time, quality-assured software delivery for key Volkswagen Group models (including ECE homologation)
- Stakeholder management: internal & external
- Process optimization: implemented a continuous improvement process (CIP) with a tracking system
Daniel Sedlack
Last position:
Senior Software Engineer at energielenker solutions GmbH
- Designed and implemented a Python-based ETL pipeline with the Dagster framework to transform raw energy data from heterogeneous sources using InfluxDB and visualizations in Grafana
- Defined time-based and dependency-based jobs
- Deployed to managed Kubernetes clusters using Helm
- Integrated InfluxDB Cloud
- Prepared data for use in Grafana, including cleaning, normalization, and time-based resampling in Python
- Developed dashboards and visualizations in Grafana
- Developed unit tests with mocking using pytest
- Set up a CI/CD pipeline in GitLab
Technologies: Python, Dagster, InfluxDB, Grafana, pandas, pytest, REST, CI/CD, GitLab, Container, Kubernetes, Helm, Docker, Cloud
Amir Alinaghi
Last position:
Master's Thesis at Friedrich-Alexander University
- Analysis of the role of marriage as an informal insurance in Germany using econometric methods (supervisor: Prof. Dr. Harald Tauchmann).
- Prepared and cleaned multiple panel datasets and extracted relevant variables to create a final panel dataset with over 36,000 observations (2006–2020, SOEP).
- Designed an IV model in Stata to examine the causal link between couple separation and health shocks (mental/physical).
- Conducted robustness checks to ensure stability and validity of the results.
Sophia Wagner
Last position:
AI Engineer & Technical Consultant at Freelance
- Delivered ML pipelines for OCR, semantic search, and computer vision
- Integrated Azure AI Agents and GPT workflows for automation and QA
- Deployed cloud-based FastAPI services with scalable architecture
- Created integration docs and advised on LLM production readiness
Frank Bergmann
Last position:
System Engineer at Frequentis Comsoft
- Migrate company software to RHEL10
- Development in Bash, Python, C, Ansible
Felix Klug
Last position:
Senior Consultant Data Science & Engineer at metafinanz Informationssysteme GmbH
- Technical coaching for migration of activities from SAS to the Palantir Foundry platform
- Provided technical consulting and guidance during onboarding, delivered end-to-end knowledge in Palantir Foundry including pipeline usage
- Developed AI-driven tools for analysis of external parameters using machine learning techniques with TensorFlow and PyTorch
- Built an ETL pipeline in Python deployed on AWS and administered a SQL database
- Optimized business processes through process mining with Celonis by building frontend and backend dashboards, delivering data via SAS and SQL, setting up delta loads, and conducting enablement workshops
- Collaborated with sales and recruiting teams to identify new opportunities and assess applicants
- Organized internal and external events to promote teamwork and strengthen company presence
- Deepened technical skills in AI/ML, cloud-based solutions, and data engineering within the finance and reinsurance industry
Basel Jaber
Last position:
Senior Application Engineer / Product Manager at Altran Magnetics LLC
- Oversee development and optimization of key products, including DP contactors, EMI filters, and circuit breakers.
- Lead certification processes ensuring compliance with UL, TÜV, and VDE standards.
- Act as technical liaison between customers, sales teams, and manufacturing to deliver customized solutions.
Jean-Louis Tsalefac
Last position:
Area Manager - Aftersales Operations at E80 Group
- Development and quotation of technical solutions
- Design of high-performance solutions
- Management of aftersales operations, teams and budget
- Documentation revision
Kshitija Kamtam
Last position:
CEO Office at Techno Design GmbH
- Acted as a trusted advisor to leadership, driving strategic initiatives, structuring meetings, and ensuring follow-through on key priorities.
- Led the launch of a corporate travel platform, aligning cross-functional teams and improving operational efficiency.
- Conducted market and competitive analyses to identify growth opportunities and inform business and investment decisions.
- Supported M&A and venture evaluations, contributing to global expansion and portfolio strategy.
- Developed strategy briefs, business cases, and executive presentations to enable data-driven decision-making.
- Managed quarterly and annual planning processes, tracked KPIs, and ensured alignment with organizational goals.
- Planned and executed brand initiatives, including organizing Techno at Bharat Tex, enhancing industry visibility and partnerships.
- Strengthened internal communication cadence and governance frameworks, improving execution efficiency by 20%.
- Drove process improvements to enhance execution discipline and strategic alignment.
- Enhanced governance and reporting mechanisms to increase accountability, milestone tracking, and performance visibility.
- Collaborated closely with finance, product, and strategy teams to ensure timely delivery of cross-functional priorities.
- Fostered knowledge-sharing and continuous-improvement practices to strengthen organizational collaboration and execution.
Lazaros Koutsianos
Last position:
RAG Webinar: Deep Dive and Use Cases at SHI GmbH
- Design, preparation and delivery of a webinar on 'RAG in Practice: How publishers create real value with AI'
- Preparing technical and strategic content on Retrieval Augmented Generation (RAG) for a mixed audience from the publishing industry
- Presenting specific use cases, technical backgrounds, common challenges and solution approaches when using RAG
- Providing practical insights into data preparation, model selection and output optimization in the context of digital publishing portals
- Conceptual and technical preparation of the webinar
- Selecting and presenting practical use cases from the publishing environment
- Developing technical backgrounds for implementing RAG systems
- Presenting and explaining typical challenges and solution strategies
- Large Language Models (LLMs)
- Retrieval Augmented Generation (RAG)
Michael Eilers
Last position:
Software Developer at Continental
- Supported a telematics component in the automotive sector with SELinux and open-source license management.
- Products: SELinux, iMX8, ScanCode.
- Skills: Linux, firmware development, Python.
Yevhen Chubchyk
Last position:
Python/Django Developer at Deuta Werke
- Expansion and maintenance of existing custom information systems based on Django
- Technologies used: Django, Django REST Framework, MySQL, Docker
Discover over 15,000 top freelancers
Statistics of experts using LaTeX
Aggregated from the professional profiles of matched freelancers.
Experience
15 years
Position duration
2.3 years
Positions per freelancer
9
Top business areas
Information Technology, Research and Development, Product Development
Top industries
Information Technology, Education, Manufacturing
Certification focus areas
Information Technology, Product Development, Research and Development
Bachelor's degree or higher
96%
Master's degree or higher
83%
Doctorate
27%
Certifications per freelancer
2
Most common languages
German, English, French
Speak two or more languages
99%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using LaTeX
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
What LaTeX is
LaTeX is a document preparation system for precise, structured writing. It is used for papers, theses, books, reports, standards, and slides where layout must stay consistent and formulas must render cleanly.
Where it fits
- Scientific articles with citations and equations
- Technical documentation and manuals
- Thesis and dissertation formatting
- Books, white papers, and reference guides
- Slide decks with Beamer
Teams choose LaTeX when Word-style editing becomes too fragile. It keeps content separate from presentation, which helps with long documents, version control, and repeatable publishing.
Common tools
The ecosystem usually includes TeX Live or MiKTeX, BibTeX or Biber, and editors such as Overleaf, TeXstudio, or VS Code with LaTeX support. Strong professionals know document classes, packages, float handling, cross-references, and custom macros.
When to bring in experts
Companies hire freelance LaTeX specialists when a document must be rescued, standardized, or delivered under pressure. Common signs include broken tables, unstable references, citation problems, inconsistent styles, or a thesis template that no one can maintain.
What strong specialists do
- Set up clean templates and reusable macros
- Fix layout, spacing, and page-breaking issues
- Configure bibliographies, indexes, and glossaries
- Prepare figures, tables, and equations for print or PDF
- Keep source files readable for future edits
Good experts write maintainable source, not just a finished PDF. They understand how LaTeX compiles, how packages interact, and how to keep documents stable across revisions.
Germany projects
In Germany, LaTeX is common in universities, research groups, engineering firms, and technical publishing. Remote work is often enough, but some projects need close coordination in German or English around house style, review cycles, or institutional templates.
Frequently asked questions
Everything clients usually want to know about LaTeX, in one place.
LaTeX is used for documents that need precision and consistency, especially when they contain equations, citations, or complex structure. Companies use it for theses, reports, books, manuals, scientific papers, and presentation decks. It is valued when layout must stay stable across long revisions.
LaTeX gives more control over structure, references, and mathematical typesetting than typical WYSIWYG tools. Word is easier for simple editing, but it can become hard to manage in long technical documents with many cross-references. Teams usually choose LaTeX when consistency and repeatability matter more than visual drag-and-drop editing.
Hire a LaTeX specialist when a document template is broken, a thesis needs strict formatting, or citations and floats keep failing. It also helps when your team needs custom macros, a new house style, or a migration from Word, Markdown, or an old TeX file set. A strong specialist can stabilize the source and make future edits safer.
A strong LaTeX professional usually knows BibTeX or Biber, Git, and the basics of editing structured text files. For technical work, knowledge of math notation, tables, figure handling, and publication workflows is important. Experience with Overleaf, TeX Live, or MiKTeX is often useful too.
LaTeX work in Overleaf can be enough for simple documents, but serious projects often need deeper knowledge. Custom classes, package conflicts, bibliography edge cases, and template migrations usually require someone who understands the underlying source, not just the editor. Overleaf is a tool; LaTeX expertise goes beyond the interface.
Yes, most LaTeX projects are well suited to remote collaboration because the work lives in source files and PDFs. For teams in Germany, remote support often works well when the expert can review templates, comments, and style rules asynchronously. On-site sessions can help for kickoff, training, or demanding review rounds.
Look for clean source, not just a polished PDF. A good LaTeX specialist writes readable macros, uses stable packages, and can explain how they handle references, floats, and layout problems. Ask for sample files or a short test task that matches your real document type.
A LaTeX project in Germany may involve German-language documents, local citation styles, or institutional thesis templates. Clear communication about house rules, review timing, and approval steps matters a lot. Remote work is common, but some clients expect careful coordination with research teams or editorial staff.
The average hourly rate of freelancers in Germany who have used LaTeX in their recent projects is 89 €, which corresponds to a daily rate of about 708 € based on an 8-hour working day.
Of the freelancers in Germany who have used LaTeX in their recent projects, 96% hold at least a Bachelor's degree, 83% hold at least a Master's degree, and 27% hold a doctorate.
On average, freelancers in Germany who have used LaTeX in their recent projects have 15 years of professional experience, with a single engagement typically lasting around 2.3 years.
The most common languages among freelancers in Germany who have used LaTeX in their recent projects are German (99%), English (97%), and French (21%).
The most common industries among freelancers in Germany who have used LaTeX in their recent projects are Information Technology (66%), Education (60%), and Manufacturing (37%).
The most common business areas among freelancers in Germany who have used LaTeX in their recent projects are Information Technology (75%), Research and Development (73%), and Product Development (70%).
Main locations of FRATCH Experts, who have recently used LaTeX
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin 
Hamburg 
Munich Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
