Dassault ENOVIA Experts in Germany
to connect product data and teams with vetted, available freelancersHire experts who configure ENOVIA and 3DEXPERIENCE environments, manage product lifecycles, and connect engineering, manufacturing, and supply-chain processes. FRATCH matches you quickly and precisely with vetted, available freelancers for your project.
Meet FRATCH Experts in Germany, who have recently used Dassault ENOVIA
Andreas W.
Last position:
Enterprise Architect at Own development / IP of CAMCO Engineering UG
UEF 3.0 · Semantic Government Overlay (SGO) · Autonomous Systems (UAS / dual use)
- Designed: Semantic Government Overlay (SGO) – AI-guided administration without replacing existing specialist procedures. Read-only semantic layer over registers and specialist processes based on the Federal Information Management (FIM). Decision authority remains with the case worker (architecture principle).
- Developed: Reference architecture with source-backed, derived statements (Executable Ontologies OWL/RDF/SHACL). Technically guaranteed purpose limitation and no-write-path principle in specialist data – auditable, without a central data pool.
- Anchored: Regulation as a design principle: EU AI Act (high-risk obligations for public-sector AI, fundamental rights impact assessment under Art. 27), GDPR, NIS2, and administrative automation limits (§ 35a VwVfG, § 31a SGB X) as technical control points in the architecture.
- Created: Methodical tool for pilot organizations: data pipeline assessment (phase 0), compliance blueprint, and management summary as a decision-ready package for public administration.
- Specified: UEF 3.0 as a successor architecture to TOGAF – decision paper, canonical ontology, six-layer architecture, read/actuate boundary, federation registry, terminology concordance, and release delta as a closed specification status.
- Architected: AI-native mission OS for autonomous UAS and ground robotics as a tactical layer on top of a separately approved autopilot. Run-time assurance according to ASTM F3269-21 (Simplex pattern): the verified safety controller keeps authority, the AI function provides suggestions.
- Designed: Three-tier architecture – Tier 0 autopilot with 650 Hz flight control on RTOS, Tier 1 AI OS with semantic world model and multi-agent cluster, Tier 2 swarm and ground mesh. Zenoh as the primary fabric, MAVLink as the only authenticated command path (single writer). Result: graceful degradation – loss of the mission, not of the aircraft.
- Secured: Two-gate chain on the read/actuate boundary – governance gate (can-question: AI Act risk class per actuation, enforced human oversight under Art. 14, immutable log) before the RTA safety monitor (is-it-correct question: flight envelope, geofence, energy reserve) with revert to the baseline controller.
- Anchored: Dual-use architecture with common core and build-time fork instead of runtime switch. Three separate legal levels: civil variant – UAS under the EASA Basic Regulation (EU) 2018/1139 with the limited applicability under Art. 2(2) of the AI Act, ground robotics under the Machinery Regulation 2023/1230 with the full high-risk obligation chain, Cyber Resilience Act for both; unarmed carrier variant as defense material under AWG/AWV and Dual-Use Regulation 2021/821 (BAFA approval); armed variant under KrWaffKontrG. Each variant lives under exactly one dominant legal regime. Evidence base: AI BOM, SBOM, and complete data lineage.
- Analyzed: System analysis and realignment of grown engineering system landscapes. Approach concept for consolidation without migration – semantic layer over the existing sources instead of data transfer. Result: decision-ready implementation concept including an evaluation model for the target architecture.
Martin H.
Last position:
Lead Product Owner at Energy
- Team leadership: Prioritization and coordination of four cross-functional teams.
- Platform strategy: Development and implementation of strategies to optimize existing IT platforms.
- Stakeholder management: Active management of expectations and communication with internal and external stakeholders.
- Program and innovation management: Prioritization and coordination of cross-department projects as well as innovation initiatives.
- Product Owner consulting: Advising Product Owners with a focus on product development and continuous product improvement.
- Organizational development: Improving communication and decision-making structures across all organizational levels.
- Change management: Implementing best-practice change management methods to ensure continuous optimization and innovation.
- Quality assurance: Ensuring high quality standards in processes, services, and deliverables.
Hamdi D.
Last position:
E-Mobility Project Manager at DELTA ENERGY SYSTEMS (GERMANY) GmbH
- Analyze subject-specific requirements, taking the project objectives into account (using Doors as a tool)
- Derive work packages and define milestones based on the previous requirements analysis
- Create and continuously update the project plan using MS Project
- Coordinate with departments and series production industrialization
- Review and track milestones and work packages (MS Project, JIRA confluence)
- Prepare monthly presentations for management on the project, project planning, status, and outlook
- Coordinate prototype builds and tests as part of Design Verification
- Document all project activities, including all required forecasts, analyses, recommendations, and plans (A-Spice compliant)
- Coordinate with sites in China and Thailand
Martin M.
Last position:
Requirements Engineer at MCM Modern Engineering UG HB
- Analysis of the current process
- Development of the target processes
- Support for the implementation of improvements in an SAP-enabled program
- Simplification of customer contact initiation
- Streamlining internal processes through automated real-time verification of claim relevance
- Creation of use cases
Vedran K.
Last position:
Zeiss Smart Services Dashboard at Zeiss
Realtime monitoring and analysis of individual devices, device groups, or the entire machine park
Data evaluation of one or more measurement systems or a complete machine park to compare devices
Data export as .csv file for: utilization, usage, collisions, measurement plans and temperatures
Notifications via browser and email
Analysis of project requirements and goals
Implementation of UI components and features based on design specifications
Development of RESTful APIs with C# .NET
Implementation of business logic and server-side data processing
Review of code changes by other developers
Azure IoT infrastructure, Cosmos DB, Angular, .NET 6
C#, Typescript, REST
Nayyar R.
Last position:
Project Manager at Borsi GmbH & Co. KG
- Technical project management from inquiry to series release
- Monitoring project progress in terms of cost, schedule and quality
- Design of deep-drawing tools and conceptualization of plastic parts and tooling
- Development of manufacturing concepts and coordination with specialist departments
- Performing feasibility analyses and cost calculations, technical support for proposals
Konstantin P.
Last position:
Development Engineer at Jungheinrich AG
- General development and design topics
- Design of all components made of metal or plastic
- Changes to existing components, assemblies and drawings
- Drawing creation
- Data maintenance in SAP
Jens S.
Last position:
Development, Engineering and Design at Jens Schrader
Ihsan K.
Last position:
Machine and Plant Design Engineer
- Designing a test fixture for compressors according to the requirements specification and P&ID diagram
- Designing operating equipment such as clamping devices and special tools
- Designing the travel table in 3 axes with a steel frame
- Creating complete technical documentation and all assembly and part drawings based on the 3D model
- Considering order documents, customer specifications, internal plant standards and quality regulations in new product developments
- Ensuring compliance with specifications and the product development process
- Coordinating design implementation, defining solution approaches and scheduling
- Monitoring design progress and checking solution approaches for feasibility
- Performing strength calculations
- Using AutoCAD Inventor 2021, MS Office and SAP
Karlheinz H.
Last position:
CAD Designer at Fa.wisro.co.uk
- Design of container emptying system
- Use of Catia V5
Discover over 15,000 top freelancers
Statistics of experts using Dassault ENOVIA
Aggregated from the professional profiles of matched freelancers.
Experience
27 years
Position duration
1.8 years
Positions per freelancer
17
Top business areas
Product Development, Project Management, Quality Assurance
Top industries
Manufacturing, Automotive, Energy
Certification focus areas
Product Development, Information Technology, Production
Bachelor's degree or higher
88%
Master's degree or higher
38%
Certifications per freelancer
2
Most common languages
German, English, Turkish
Speak two or more languages
100%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using Dassault ENOVIA
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Dassault ENOVIA experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (100%)
- Automotive (90%)
- Energy (50%)
- Construction (40%)
- Transportation (40%)
- Aerospace and Defense (30%)
- Information Technology (30%)
- Professional Services (30%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Product lifecycle foundation
Dassault ENOVIA is a collaborative product lifecycle management solution from Dassault Systèmes. It manages product data, requirements, documents, changes, configurations, and approvals across the full development process. Teams often access ENOVIA through the broader 3DEXPERIENCE platform, where product information connects with design and simulation work.
What teams deliver
ENOVIA supports controlled, traceable collaboration for complex products and regulated processes.
- Product structures, bills of material, and configuration management
- Requirements, specifications, documents, and approvals
- Engineering change requests, orders, and release workflows
- Quality, compliance, supplier, and program collaboration
- Product data exchange across engineering and manufacturing
Ecosystem and integration
Strong ENOVIA specialists understand the Dassault Systèmes ecosystem, including CATIA, DELMIA, SIMULIA, and the 3DEXPERIENCE services surrounding them. They work with roles, permissions, attributes, lifecycles, policies, relationships, forms, and business rules. Integration work may involve ERP, MES, CAD, identity, and data migration systems through APIs, connectors, or structured import processes.
When freelance expertise helps
Companies bring in freelance ENOVIA expertise during implementations, platform consolidation, process redesign, and difficult data migrations. External specialists can also support a rollout across sites, stabilize an inherited configuration, or prepare a controlled upgrade without distracting internal teams. In Germany, collaboration may need to span manufacturing locations, suppliers, and international business units, with German and English communication depending on the organization.
Signs you need a specialist
A focused review is useful when product data is hard to find, approvals happen outside the system, or different teams maintain conflicting structures.
- ENOVIA workflows no longer reflect real engineering or release processes
- Users struggle with roles, access rights, forms, or navigation
- Legacy data needs mapping, cleansing, and controlled migration
- Integrations create duplicate records or unreliable status information
- A rollout needs training, governance, and adoption support
What strong professionals bring
The best professionals combine hands-on ENOVIA configuration with a clear understanding of product governance and business processes. They ask how teams create, review, release, and reuse information before changing the system. Look for evidence of structured migrations, tested integrations, permission design, documentation, and practical communication with both technical and non-technical stakeholders.
Frequently asked questions
Before you brief your next project: the most common questions about Dassault ENOVIA.
Dassault ENOVIA is used to manage product data and lifecycle processes from early requirements through design changes, release, manufacturing handover, and service-related collaboration. It gives distributed teams a controlled place for product structures, documents, approvals, and traceability.
ENOVIA provides product lifecycle and collaboration capabilities within the wider 3DEXPERIENCE environment from Dassault Systèmes. A specialist should understand how ENOVIA roles and data connect with applications such as CATIA, DELMIA, and SIMULIA.
MatrixOne was an earlier product lifecycle management technology that became part of the Dassault Systèmes portfolio, while ENOVIA SmarTeam is a related product data management solution. A professional should identify the exact legacy version, data model, and migration path before recommending a target environment.
Dassault ENOVIA work often benefits from knowledge of CAD data, product structures, change management, requirements, and manufacturing processes. Integration experience with ERP, MES, identity services, APIs, data quality, and reporting is also valuable.
ENOVIA projects need more than screen-level configuration when they affect product governance, integrations, or legacy data. The right professional has handled a comparable scope and can explain decisions around data ownership, permissions, workflows, testing, migration, and user adoption.
Dassault ENOVIA work can often be delivered remotely when secure access, clear process documentation, and reliable communication are available. On-site sessions may still help with workshops, plant-specific workflows, data reviews, or coordination across German and international teams.
ENOVIA quality is best assessed through relevant delivery examples, a clear discovery approach, and evidence of tested configurations and integrations. Ask how the professional handles permissions, change control, migration validation, documentation, and problems caused by inconsistent product data.
3DEXPERIENCE and ENOVIA engagements become clearer when the company defines its current applications, target processes, user groups, integrations, data sources, and expected deliverables. It also helps to state whether the priority is implementation, configuration, migration, support, governance, or a combination of these.
The average hourly rate of freelancers in Germany who have used Dassault ENOVIA in their recent projects is 84 €, which corresponds to a daily rate of about 674 € based on an 8-hour working day.
Of the freelancers in Germany who have used Dassault ENOVIA in their recent projects, 88% hold at least a Bachelor's degree and 38% hold at least a Master's degree.
On average, freelancers in Germany who have used Dassault ENOVIA in their recent projects have 27 years of professional experience, with a single engagement typically lasting around 1.8 years.
The most common languages among freelancers in Germany who have used Dassault ENOVIA in their recent projects are German (100%), English (100%), and Turkish (20%).
The most common industries among freelancers in Germany who have used Dassault ENOVIA in their recent projects are Manufacturing (100%), Automotive (90%), and Energy (50%).
The most common business areas among freelancers in Germany who have used Dassault ENOVIA in their recent projects are Product Development (100%), Project Management (70%), and Quality Assurance (70%).
Main locations of FRATCH Experts, who have recently used Dassault ENOVIA
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
