CIM DATABASE Experts in Germany
in minutes from 15,000+ CVs with AI matchingHire experts who know CIM Database, CONTACT Software environments, product data management, change control, and workflow setup. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used CIM DATABASE
Andreas Winters
Last position:
Enterprise Architect at Own development / IP of CAMCO Engineering UG
UEF 3.0 · Semantic Government Overlay (SGO) · Autonomous Systems (UAS / dual use)
- Designed: Semantic Government Overlay (SGO) – AI-guided administration without replacing existing specialist procedures. Read-only semantic layer over registers and specialist processes based on the Federal Information Management (FIM). Decision authority remains with the case worker (architecture principle).
- Developed: Reference architecture with source-backed, derived statements (Executable Ontologies OWL/RDF/SHACL). Technically guaranteed purpose limitation and no-write-path principle in specialist data – auditable, without a central data pool.
- Anchored: Regulation as a design principle: EU AI Act (high-risk obligations for public-sector AI, fundamental rights impact assessment under Art. 27), GDPR, NIS2, and administrative automation limits (§ 35a VwVfG, § 31a SGB X) as technical control points in the architecture.
- Created: Methodical tool for pilot organizations: data pipeline assessment (phase 0), compliance blueprint, and management summary as a decision-ready package for public administration.
- Specified: UEF 3.0 as a successor architecture to TOGAF – decision paper, canonical ontology, six-layer architecture, read/actuate boundary, federation registry, terminology concordance, and release delta as a closed specification status.
- Architected: AI-native mission OS for autonomous UAS and ground robotics as a tactical layer on top of a separately approved autopilot. Run-time assurance according to ASTM F3269-21 (Simplex pattern): the verified safety controller keeps authority, the AI function provides suggestions.
- Designed: Three-tier architecture – Tier 0 autopilot with 650 Hz flight control on RTOS, Tier 1 AI OS with semantic world model and multi-agent cluster, Tier 2 swarm and ground mesh. Zenoh as the primary fabric, MAVLink as the only authenticated command path (single writer). Result: graceful degradation – loss of the mission, not of the aircraft.
- Secured: Two-gate chain on the read/actuate boundary – governance gate (can-question: AI Act risk class per actuation, enforced human oversight under Art. 14, immutable log) before the RTA safety monitor (is-it-correct question: flight envelope, geofence, energy reserve) with revert to the baseline controller.
- Anchored: Dual-use architecture with common core and build-time fork instead of runtime switch. Three separate legal levels: civil variant – UAS under the EASA Basic Regulation (EU) 2018/1139 with the limited applicability under Art. 2(2) of the AI Act, ground robotics under the Machinery Regulation 2023/1230 with the full high-risk obligation chain, Cyber Resilience Act for both; unarmed carrier variant as defense material under AWG/AWV and Dual-Use Regulation 2021/821 (BAFA approval); armed variant under KrWaffKontrG. Each variant lives under exactly one dominant legal regime. Evidence base: AI BOM, SBOM, and complete data lineage.
- Analyzed: System analysis and realignment of grown engineering system landscapes. Approach concept for consolidation without migration – semantic layer over the existing sources instead of data transfer. Result: decision-ready implementation concept including an evaluation model for the target architecture.
Konrad Müller
Last position:
Managing Director/Entrepreneur at M-CAD Müller & Partner GbR
- External engineering services and project support for automobile manufacturers and their suppliers according to their standards and specifications (e.g. Alfa-Romeo, Audi, Daimler AG, BMW, Ford, Fiat, General Motors, Hyundai, Land-Rover, Mahindra, Mercedes-AMG GmbH, Nissan, Iveco, MAN, PSA, Porsche, Proton, Renault, Smart, Suzuki, Tata Motors, Volvo, VW)
- Cooperation with MHG Fahrzeugtechnik GmbH, BorgWarner Turbo Systems GmbH, Eberspächer Exhaust Technology GmbH & Co. KG, BorgWarner Emission Systems GmbH, BIN Boysen Innovationszentrum Nagold GmbH & Co. KG, Miccavonics GmbH, Bizerba GmbH & Co. KG
- 3D modeling and development taking into account:
- Costs: short, targeted, efficient, scientific, innovative and competitive planning with little rework
- CFD (flow distribution, pressure loss, flow around and speeds in steady-state, unsteady, laminar, turbulent and multiphase flows)
- FEM/FEA (strength, modal, thermomechanical, fatigue and operational analyses, linear, nonlinear as well as static and dynamic structural assessments)
- Acoustics (flow-induced noise and vibrations)
- Manufacturing requirements (simplification of common-part concepts, material selection, integration of existing processes)
- Packaging compliance with suggestions for cost reduction and efficiency improvement
- Projects included:
- Exhaust manifolds for gasoline and diesel engines (3, 4, 6, 8 cylinders)
- Close-coupled and underfloor catalyst systems with SCR, urea injection and mixing chambers
- Compact commercial vehicle catalyst systems (one-box design) with fuel processor
- Catalyst systems in muffler systems for passenger cars
- Active Noise Cancelling (patented design and arrangement, prototype development and acoustic analysis)
- Development of test fixtures, prototypes and SCR distribution scanners
Hans Malarski
Last position:
Technical Writer / CE Coordinator / Consultant for Multilingual Information Management at Self-employed
- Creating and translating technical documentation and software with regard to regulatory requirements
- Organizing the language components of board and supervisory board meetings
- Leading and coordinating multilingual documentation and translation projects externally
- Achieving annual cost savings
- Advising SMEs and global players on optimizing the workflows of multilingual documentation creation
- Developing efficient terminology and translation management
Michael Beck
Last position:
Developer/Consultant at Fresenius Medical Care
- Development of automated end-of-line tests (functional tests) for dialysis machines on a PLC test bench in a production environment
- Introduction of new technology based on Vector vTestStudio, CANoe, and Siemens S7 PLC
- Creating test concepts
- Implementing test cases and libraries in CAPL and C#
- Touch screen emulation and proprietary RPC (Remote Procedure Call) via CAN
- Connecting to the PLC (Siemens Simatic)
- Defining interfaces for device communication (vCDL)
- Defining user interfaces and linking to the frontend (JSON)
- Agile work using DevOps (Azure)
- Skills: CAPL, .NET, C#, vCDL, CANOpen, DevOps, PLC
- Tools used: Vector CANoe 18, vTestStudio 4, MS Azure DevOps, MS Visual Studio 2022, Mosquito MQTT, Git, Siemens TIA Portal
Konstantin Petkov
Last position:
Development Engineer at Jungheinrich AG
- General development and design topics
- Design of all components made of metal or plastic
- Changes to existing components, assemblies and drawings
- Drawing creation
- Data maintenance in SAP
Philipp Klee
Last position:
Junior In-house CAD/PDM Consultant at Erwin Hymer Group
Wito Jost
Last position:
Freelance Design Engineer at ENGGESA Maschinenbau GmbH
- Sheet metal design
- Design of various individual test fixtures for the automotive industry
- Test fixture for connectors
- CAD systems: SolidWorks
Discover over 15,000 top freelancers
Statistics of experts using CIM DATABASE
Aggregated from the professional profiles of matched freelancers.
Experience
28 years
Position duration
6.7 years
Positions per freelancer
10
Top business areas
Product Development, Quality Assurance, Project Management
Top industries
Automotive, Manufacturing, Aerospace and Defense
Certification focus areas
Product Development, Quality Assurance, Customer Service
Bachelor's degree or higher
67%
Master's degree or higher
33%
Certifications per freelancer
3
Most common languages
German, English, Afrikaans
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using CIM DATABASE
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
PLM core
CIM DATABASE is used for product data management, document control, and change processes around complex industrial products. It sits at the center of engineering work, connecting items, parts, files, and approvals in one structured system. Many teams still refer to it as CIM Database or the CONTACT Software suite.
Typical work
- Set up product structures, documents, and version rules
- Model change requests, approvals, and release steps
- Support item classification and traceable handovers
- Align workflows with engineering and quality teams
It is often chosen where technical data must stay consistent across departments and along the full product life cycle.
Ecosystem
Strong specialists usually know the wider CONTACT Software environment, not only the main application. They work with configuration, workflows, interfaces, reporting, and related PLM or PDM processes.
- Data models and object relations
- Workflow setup and process rules
- Integration with ERP, CAD, and document systems
- Permissions, roles, and audit-friendly structures
When to bring help
Companies bring in freelance expertise when a rollout needs to be adapted, cleaned up, or connected to other tools. That is common during migrations, new workflow design, interface work, or support for a specific plant or business unit.
In Germany, this is especially relevant for industrial groups that want experienced help without building a full internal team for every change.
What good experts do
Good professionals understand both the software and the business process behind it. They can translate engineering needs into stable structures, keep naming and status logic clean, and avoid fragile custom setups.
They also document decisions well, test changes carefully, and work with users in a way that reduces disruption during release or migration work.
Signs you need one
- Your data model has grown messy over time
- Workflows no longer match real approval steps
- Interfaces fail between CIM DATABASE and other systems
- Users struggle with versioning, releases, or search
At that point, an experienced specialist can quickly find the real cause and improve the setup without broad changes that create new problems.
Frequently asked questions
Not sure where to start with CIM DATABASE? These answers cover the essentials.
CIM DATABASE is used to manage product data, documents, changes, and release flows in industrial environments. It helps keep technical information consistent when many teams work on the same product. In practice, it supports traceability from the first item structure to the approved release.
Yes, CIM Database is the common way many people write it, while CIM DATABASE is the product name you still see in searches and legacy contexts. Both usually refer to the CONTACT Software PLM environment. A good specialist should understand that naming history and know the current system setup behind it.
CIM DATABASE is often weighed against other PLM and PDM suites that manage product structures, documents, and changes. The main difference is usually not the basic function, but how well the system fits existing processes, integrations, and user roles. A strong expert can tell you whether the current setup is underused or simply configured poorly.
A strong CIM DATABASE freelancer usually brings process design, data modeling, workflow configuration, and interface know-how. Skills around ERP, CAD, document management, and migration work are often important too. In many projects, clear communication with engineering and quality teams matters as much as technical setup.
CIM Database projects can be small configuration tasks or larger rollout and migration efforts. A simple workflow adjustment may need one experienced specialist, while a deeper integration or data cleanup usually needs broader process understanding. The key is not a title, but proven work on similar product data structures and release logic.
Yes, CIM DATABASE work is often suitable for remote collaboration, especially for configuration, analysis, and interface design. On-site time can still help during workshops, user training, or close coordination with plant teams. In Germany, many companies use a mixed setup to keep communication fast while limiting travel.
A good CIM DATABASE specialist can explain how they handled data structures, workflows, permissions, and integrations in past work. Look for clear examples of solved problems, not vague claims about general software knowledge. Strong answers usually mention release logic, traceability, and how they kept the setup maintainable.
Companies usually bring in CIM DATABASE expertise when workflows become too complex, data quality drops, or integrations stop behaving as expected. Migration projects and reorganizations are also common triggers. If users rely on manual workarounds, the setup likely needs a careful review by a specialist.
The average hourly rate of freelancers in Germany who have used CIM DATABASE in their recent projects is 87 €, which corresponds to a daily rate of about 697 € based on an 8-hour working day.
Of the freelancers in Germany who have used CIM DATABASE in their recent projects, 67% hold at least a Bachelor's degree and 33% hold at least a Master's degree.
On average, freelancers in Germany who have used CIM DATABASE in their recent projects have 28 years of professional experience, with a single engagement typically lasting around 6.7 years.
The most common languages among freelancers in Germany who have used CIM DATABASE in their recent projects are German (100%), English (100%), and Afrikaans (14%).
The most common industries among freelancers in Germany who have used CIM DATABASE in their recent projects are Automotive (86%), Manufacturing (71%), and Aerospace and Defense (43%).
The most common business areas among freelancers in Germany who have used CIM DATABASE in their recent projects are Product Development (100%), Quality Assurance (71%), and Project Management (57%).
Main locations of FRATCH Experts, who have recently used CIM DATABASE
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
