Experience
Bachelor of Science in Mechanical Engineering
University of Engineering and Technology
Fulfilled the requirements for the degree of Bachelor of Science in Mechanical Engineering with Honours and was placed in the First Division.
Completed a final year project (ME-499) held between January and April 2003.
Studied core engineering subjects including Engineering Drawing & Graphics, Mechanics of Materials I & II, Engineering Mechanics, Applied Thermodynamics I & II, Fluid Mechanics, Workshop Technology, Electrical Engineering, Applied Mathematics I & II, and Computer Programming.
Completed advanced coursework in Machine Design and CAD I & II, Mechanics of Machines I & II, Hydraulics Machinery, Machine Tools and Machining, Engineering Economics & Optimization, Modern Electronics, Internal Combustion Engines, Power Plants, Heat and Mass Transfer, Engineering Materials, Production Engineering, Industrial Engineering I & II, Electromechanical Systems, Instrumentation and Control, Mechanical Vibration, Stress Analysis, Refrigeration and Air Conditioning, Energy Resources & Utilization, Gas Dynamics, and Production Automation.
Completed four levels of Islamic & Pakistan Studies.
Master of Science in Mechatronics
Universität Siegen
Master Thesis: Hardware designing, development and microcontroller programming for temperature control of a closed cabin, examined by Prof. Stöhr.
Project Work: Handling of a capacitive humidity sensor with a data acquisition USB board, examined by Prof. Stöhr.
Completed 120 ECTS credits with an average grade of 2.2.
Coursework included Actorics, Advanced Control I & II, Automation and Industrial Communication, Basic Control, Electrical and Electronic Engineering I & II, Electrical Machines and Power Electronics, Embedded Control, Fluid Power, Machine Dynamics & System Dynamics, Mechatronic Systems, Modeling and Simulation, Project Management I & II, Sensorics, German Language Course, Structural Health Monitoring, Robotics, Intercultural Communication and Cooperation, Control Laboratory, Introduction to Programming, Software Engineering, and Mechatronic Design in Production Machines.
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Education.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Research and Development.
Frequently asked questions
Have questions? Find more information here.
Furqan is based in Augsburg, Germany and can operate in on-site, hybrid, and remote work models.
Furqan speaks the following languages: Urdu (Native), English (Advanced), German (Elementary).
Furqan has at least 4 years of experience. During this time, Furqan has worked in at least 1 role and for 1 company. The average length of individual experience is 4 years and 4 months. Note that Furqan may not have shared all experience and actually has more experience.
Based on recent experience, Furqan would be well-suited for roles such as: Bachelor of Science in Mechanical Engineering, Master of Science in Mechatronics.
Furqan's most recent position is Bachelor of Science in Mechanical Engineering at University of Engineering and Technology.
Furqan is most experienced in industries like Education.
Furqan is most experienced in business areas like Research and Development.
Furqan holds a Master in Mechatronics from Universität Siegen and a Bachelor in Mechanical Engineering from University of Engineering and Technology Taxila.
The availability of Furqan needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 19 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Muhammad Tanveer B.
Last position:
Embedded Systems Consultant / Architect | Integration and Validation Engineer / Manager at Ingenieurbüro Baig
Led the hardware development and validation of a safety-critical 400-V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in compliance with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-country EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.
Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) rework, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.
End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field-of-view limits, and thermal and voltage-related ECU state machines. Skilled use of a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.
Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.
Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.
Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurements. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.
Successfully delivered full engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept to system integration and validation, technical documentation, supplier coordination, and user training.
Archana P.
Last position:
Microelectronics Engineer at Fraunhofer IIS
- Developed embedded firmware in C/C++ under RTOS for RISC-V–based SoCs, improving performance and reliability.
- Verified FPGA modules using SystemVerilog, Cadence tools, and UVM-like frameworks for hardware–software integration.
Mathias K.
Last position:
botspot 3D Scan GmbH
- Support/consulting in the development and setup of 3D photo scanner systems
- Tools used: KiCAD, ePlanP8
Peter K.
Last position:
Hardware and Software Developer / Project Manager at Anonymer Kunde
- Development of control units for the automotive industry incl. embedded software
- CAN bus, Vector Tools, CANoe
- Support of the development process according to ISO 26262
- Ensuring cyber security standards:
- Key exchange (PKI) between vehicle and control units
- Hardware Security Module (HSM)
- Communication with external service providers (international)
- Development (PCB) of measuring adapters, statistical analysis of sensors
- IoT and embedded software development, backend administration
Caglar Ö.
Last position:
Lecturer at GFU Cyrus AG
- Training in C++ (Qt, Visual Studio, CLion)
- Training in C# (.NET 8, Blazor, WPF)
- Training in Python (OpenCV)
- Training in integration testing and UI automation
- Tools: Visual Studio, JetBrains
Andreas B.
Last position:
Project Lead, Digital Transformation at SV Linde Tacherting e.V.
Researched, developed, and implemented comprehensive digital strategy to modernize and accelerate processes of sports club with approximately 1300 members.
System Architecture & Implementation: Conceived and set up central cost- and energy-efficient ARM-based server infrastructure.
Selected, installed, and configured open-source solutions for knowledge management, ticket booking, and member management.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a Bachelor of Science in Mechanical Engineering
Nearby freelancers
Professionals working in or nearby Augsburg, Germany
