Metrology Expert in Munich
for precise inspection work, matched in minutes with vetted and available freelancersHire experts who define measurement strategies, program coordinate measuring machines and validate geometric tolerances across production environments. FRATCH matches you quickly and precisely with vetted, available freelancers for your metrology project.
Meet FRATCH Experts in Munich, who have recently used Metrology
Michael K.
Last position:
Managing Director – Interim Management at CME CompuMess Elektronik GmbH
- Supporting the shareholders in the sale of the company – buy & build strategy
- Distribution specialist and solutions provider for all topics relating to power supplies, measurement technology, test systems and OEM in various industries such as automotive, medical technology, defense and aerospace
- In-depth manufacturer-independent technical consulting from design through prototype development across the entire development process
Jaroslav P.
Last position:
Freelance Engineer as Manager Environmental Testing at Rolls-Royce Solutions
- Environmental testing, shaker testing up to 100G (Acutronic, LDS, RMS, Vibration Research)
- Testing device and temperature (Vötsch VC³7060, Weisstechnik)
- Analysis of shaker, temperature and shock tests and documentation of the results
Kyung P.
Last position:
Expert, Design-to-Mask Preparation at Robert Bosch Semiconductor Manufacturing Dresden
- Led end-to-end tape-out and photomask preparation for a 300mm automotive semiconductor program, ensuring manufacturability, data integrity, and compliance with automotive quality standards, frame generation, multi-die placement
- Identified and mitigated manufacturing-readiness risks during technology transfer (TI / TSMC 45nm) by implementing reticle, kerf, and alignment optimizations, reducing re-spin exposure, creating alignment, overlay markers, metrology targets, CD-control features, PDM cell
- Coordinated cross-functional stakeholders across design, lithography, manufacturing, and mask vendors to deliver a production-ready mask set under strict schedule constraints
- Performed and calibrated model-based OPC for the 110 nm node, leveraging RET strategies in collaboration with the photolithography modeling team
- Impact: Enabled on-time production release of a safety-critical automotive semiconductor by mitigating tape-out and manufacturability risks under strict quality and yield
Albert V.
Last position:
Program Manager Terahertz at Helmut Fischer GmbH Institut für Elektronik und Messtechnik
- Successful product launch of a measurement system based on terahertz technology
- Developed a market strategy
- Scheduling and coordination with marketing
- Preparing and giving presentations
- Created a product catalog and defined sales texts
- Conducted customer presentations at trade shows and trained sales staff
- Prepared product assemblies and trained employees
- Organized external support and set up a dedicated production area
- Coordinated prototype production and negotiated with subcontractors
- Created production documentation and calculated product costs
- Defined product specifications and test criteria
- Validated product in software and hardware areas
- Reviewed software for legal aspects and introduced an EULA
- Developed a product roadmap and supported the department with JIRA
- Conducted workshops, market analysis, and business development
- Set pricing strategy, performed competitive analysis, and visited customers
- Supported customer acquisition and technical evaluation of inquiries
- Participated in trade shows and designed demo systems
- Led sales meetings and acquired new customers
- Coordinated cross-departmental tasks and prepared spare parts lists
- Initiated product improvements and reviewed contracts
- Prepared and conducted steering committee meetings, workshops, and profitability analyses
- Planned resource needs and reporting
- Software used: MS Office, SharePoint, MS Project, Office 365, Teams, Jira, Confluence
- Project languages: English and German
- International experience: USA (3 months regular visits), Denmark (1 month occasional visits)
Mehmet A.
Last position:
Automation Engineer at Ju:niz Energy
- Developing and implementing automation solutions for PLC programming in Battery Energy Storage Systems (BESS).
- Conducted thorough analysis and debugging of control systems to enhance performance and reliability.
- Upgraded software and communication protocols.
- Collaborated with cross-functional teams to optimize HMI interfaces, improving user experience and operational efficiency.
Tomas S.
Last position:
Teamlead Validation & Prototyping at Wabtec Corporation / ANNAX GmbH
- Technical leadership of the Validation and Prototyping departments
- Design, planning and coordination of electrical and mechanical validation according to railway standard EN50155, EMC standard EN50121 and special validations such as Accelerated Life Testing
- Design, planning and coordination of validations for ANNAX China
- Requirements engineering for test execution
- Optimization of new projects through error analysis, documentation and participation in the continuous improvement process
- FMEA co-moderator during the design phase
Yimeng W.
Last position:
R&D Software Engineer at Advantest
- Development and maintenance of hardware drivers in C++
- Conducting unit and integration tests to ensure code quality
- Debugging and fixing issues with the hardware team and FPGA team
- Defining and developing software concepts and coordinating with the software architect
- Expanding test automation to improve efficiency
- Research and development of algorithms to improve existing codebases (runtime, memory usage, accuracy)
Thomas L.
Last position:
Consultant for AI-supported process automation at Lumiz
AI-supported automation of purchases on a printing company website, including the selection of delivery times, order options, ordering, payment and uploading print data from the Lumiz cloud.
Discover over 15,000 top freelancers
Statistics of experts using Metrology
Aggregated from the professional profiles of matched freelancers.
Experience
28 years
Position duration
2 years
Positions per freelancer
14
Top business areas
Product Development, Quality Assurance, Operations
Top industries
Automotive, Manufacturing, Information Technology
Certification focus areas
Information Technology, Quality Assurance, Business Intelligence
Bachelor's degree or higher
100%
Master's degree or higher
83%
Doctorate
33%
Certifications per freelancer
7
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Munich are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Munich using Metrology
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Metrology experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Automotive (100%)
- Manufacturing (100%)
- Information Technology (50%)
- Energy (38%)
- Aerospace and Defense (25%)
- Construction (25%)
- Healthcare (25%)
- Metals and Mining (25%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Measurement science
Metrology is the science of measurement and the discipline behind reliable dimensional, geometric and surface inspections. It connects measurement methods, reference standards, instruments and uncertainty evaluation so teams can decide whether parts meet defined requirements. In manufacturing, metrology turns technical drawings and tolerances into traceable inspection results.
What it builds
Metrology supports quality systems and production processes across automotive, aerospace, medical technology, electronics and precision manufacturing. Typical deliverables include:
- Inspection plans linked to drawings and tolerances
- Coordinate measuring machine programs and routines
- Measurement reports for first articles and series parts
- Gauge studies, calibration records and uncertainty budgets
- Root-cause analysis for recurring dimensional variation
Tools and methods
Professionals work with coordinate measuring machines, optical scanners, vision systems, form testers, surface measurement equipment and portable arms. Common software includes PC-DMIS, CALYPSO, PolyWorks, Verisurf and ZEISS Inspect, alongside CAD and product lifecycle data. Strong practice also covers GD&T, datum systems, calibration, traceability and statistical evaluation.
When specialists help
Companies bring in freelance metrology specialists when inspection capacity is limited, a new product needs a measurement strategy or existing results are difficult to reproduce. They may support a new production launch, machine acceptance, supplier qualification or a shift from manual checks to automated inspection. In Munich, collaboration can combine remote planning and reporting with on-site work around machines, fixtures and parts.
Selecting expertise
The right professional can translate drawing requirements into a practical measurement sequence and explain the limits of the chosen method. Look for experience with the relevant material, component size, tolerance class and inspection equipment. A useful assessment includes sample reports, programming examples, calibration practice and a clear approach to measurement uncertainty.
Quality in results
Good metrology is more than producing a pass-or-fail result. It controls fixturing, probing or scanning strategy, environmental conditions, alignment, data handling and reporting so that findings are repeatable and defensible. Professionals who document assumptions, protect traceability and communicate clearly help quality, design and production teams act on the data.
Frequently asked questions
What clients ask us most about Metrology — answered in short.
Metrology is used to measure and verify dimensions, form, position, surface condition and other characteristics against engineering requirements. It supports incoming inspection, process control, first-article approval, machine validation and failure analysis.
Metrology provides the measurement science behind quality inspection, including traceability, calibration and uncertainty. Inspection applies those measurements to decide whether a part or process meets a defined specification.
A strong metrology professional often combines GD&T, CAD interpretation, statistical process analysis and quality management knowledge. Experience with CMM programming, optical scanning, calibration systems and manufacturing processes is also valuable.
The right metrology experience depends on the tolerance complexity, equipment and purpose of the work. Routine dimensional checks may need a focused specialist, while uncertainty analysis, automated inspection or production launch work calls for broader project experience.
Metrology planning, programming preparation, data review and report writing can often be handled remotely. Physical measurement, equipment setup and troubleshooting usually require access to the site, which is relevant when coordinating work with teams in Munich.
Dimensional metrology commonly uses CMMs, portable measuring arms, optical scanners, vision systems and surface or form testers. Software such as PC-DMIS, CALYPSO, PolyWorks and ZEISS Inspect is selected according to the equipment and reporting needs.
Assess whether the metrology professional can explain the measurement strategy, datum selection, uncertainty and traceability. Review repeatability evidence, calibration records, clear reports and how well the results support an engineering or production decision.
A metrology assignment in Munich may involve automotive, aerospace, medical technology or precision manufacturing environments. Remote coordination is possible for analysis and documentation, while on-site work may require clear communication with production and quality teams and familiarity with the agreed working language.
The average hourly rate of freelancers in Munich, Germany who have used Metrology in their recent projects is 101 €, which corresponds to a daily rate of about 811 € based on an 8-hour working day.
Of the freelancers in Munich, Germany who have used Metrology in their recent projects, 100% hold at least a Bachelor's degree, 83% hold at least a Master's degree, and 33% hold a doctorate.
On average, freelancers in Munich, Germany who have used Metrology in their recent projects have 28 years of professional experience, with a single engagement typically lasting around 2 years.
The most common languages among freelancers in Munich, Germany who have used Metrology in their recent projects are German (100%), English (88%), and French (25%).
The most common industries among freelancers in Munich, Germany who have used Metrology in their recent projects are Automotive (100%), Manufacturing (100%), and Information Technology (50%).
The most common business areas among freelancers in Munich, Germany who have used Metrology in their recent projects are Product Development (100%), Quality Assurance (88%), and Operations (75%).
Main locations of FRATCH Experts, who have recently used Metrology
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Countries:
Berlin Hamburg 
Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
