Experience
R&D Software Engineer
Advantest
- Development and maintenance of hardware drivers in C++
- Conducting unit and integration tests to ensure code quality
- Debugging and fixing issues with the hardware team and FPGA team
- Defining and developing software concepts and coordinating with the software architect
- Expanding test automation to improve efficiency
- Research and development of algorithms to improve existing codebases (runtime, memory usage, accuracy)
Software Engineer
ARRK-Engineering
- Error analysis with software developers and software testers
- Analyzing communication between the control unit and sensor (Ethernet, CAN, TCP)
- Evaluating the performance and stability of control units
- Further development of test automation to increase efficiency for control units
- Analyzing software requirements and creating unit tests
- Documenting test results and preparing test reports
R&D Software Engineer
Brunel GmbH
- Developing, implementing, and optimizing algorithms for real-time GNSS positions (correction data, sensor fusion)
- Analyzing and modeling GNSS error sources (ionosphere, troposphere, clock errors) to improve accuracy and plausibility
- Implementing and maintaining algorithms for processing GNSS data (pseudorange, carrier phase)
- Defining and implementing software tests
- Evaluating software in terms of functionality and safety according to ISO26262
R&D Software Engineer
Brunel GmbH
- Analyzing measurement data for an internal camera
- Developing software for image processing
- Software-in-the-loop testing
Master's Thesis
TU Darmstadt & Continental Automotive GmbH
- Literature review on machine learning and its application in driver assistance systems
- Implementing algorithmic approaches to model driver gaze behavior: reinforcement learning, Kalman filter, fuzzy logic
- Evaluating gaze behavior models based on experimental data
- Detecting driver inattention and fatigue
- Extending lane keeping assistance (LKA) and emergency braking assistance (EBA)
Working Student Software Developer
Inform GmbH
- Designing software components for processing signals from Lidar sensors
- Implementing software components for environment perception
- Processing signals from Lidar sensors in ROS (Robot Operating System)
Functional Safety Intern
Continental Automotive GmbH
- Analyzing software requirements for radar functions
- Evaluating driving functions (EBA, ACC) according to ISO26262
- Implementing algorithms for sensor data fusion
- Evaluating the software with reference signals
- Integrating and testing software in vehicle simulation
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Manufacturing, Automotive, and Information Technology.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Product Development, Quality Assurance, Research and Development, and Information Technology.
Frequently asked questions
Have questions? Find more information here.
Yimeng is based in Munich, Germany.
Yimeng speaks the following languages: Chinese (Native), German (Advanced), English (Advanced).
Yimeng has at least 9 years of experience. During this time, Yimeng has worked in at least 5 different roles and for 6 different companies. The average length of individual experience is 1 year and 3 months. Note that Yimeng may not have shared all experience and actually has more experience.
Based on recent experience, Yimeng would be well-suited for roles such as: R&D Software Engineer, Software Engineer, Master's Thesis.
Yimeng's most recent position is R&D Software Engineer at Advantest.
In recent years, Yimeng has worked for Advantest and ARRK-Engineering.
Yimeng is most experienced in industries like Manufacturing, Automotive, and Information Technology.
Yimeng is most experienced in business areas like Product Development, Quality Assurance, and Research and Development. Yimeng also has some experience in Information Technology.
Yimeng has recently worked in industries like Manufacturing and Automotive.
Yimeng has recently worked in business areas like Product Development, Quality Assurance, and Research and Development.
Yimeng holds a Master in Electronics and Information Technology from Technical University of Darmstadt and a Bachelor in Electrical Engineering and Information Technology from Nanjing University of Technology.
The availability of Yimeng needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Matthias S.
Last position:
Software Developer and Consultant at CLADE GmbH
- Analysis of the existing CAN communication between microcontrollers
- Analysis of the sensors used and the measured values collected
- Planning the CAN messages for transmitting the measured values
- Iterative adjustment of the microcontroller code to the new CAN messages
- Cross-compilation from x64 to arm64
Tamás N.
Last position:
Embedded MISRA C Developer at DEKRA Arbeit GmbH
Task: Test tool development for Smart-Home IoT-based heating control Test tool development for Smart-Home HVAC heating and ventilation. Eliminating memory leaks in C/C++ within the CAN Analyzer application. Reviewing Python and Tcl/Tk code. Reviewing C-based simulator code for BOSCH Home Comfort cascade heating control using Visual Studio Code and Conan/Conda. Reviewing Delphi application: conversion to 64-bit. Reviewing PyQt6 user interface. SiL testing of domestic water heater control for memory leaks. Stability testing and continuous operation. Migration to Windows 11 24H2. Developing device connectivity with WinSock2 (WSAAPI, recv, send, select) for EMS/CAN IoT communication with C. Testing with virtual machines and Server Manager. Writing reports about the test cases. Logging with the RoboTT framework. Creating test procedure documentation with Docupedia. Bare-metal programming of embedded STM32 Cortex-M and simulation with Renode.io. In-depth familiarization with the SEGGER EmbOS firmware framework and its related system calls. Reviewing MATLAB/Sinumerik .m program files. Implementing redesigned OS schedulers in SEGGER EmbOS.Technologies: Embarcadero RAD Studio 10.2, Visual Studio Code, Sourcetree, Conan, Cmake, Conda, EmbOS, PyQt6, Qt6, Delphi VCL 32-bit, CAN, EMS, Powershell, MingW64, STM32 ARM-Cortex-M4F Renode.io, Windows Server 2022 Standard, RoboTT, IoT
Denis V.
Last position:
AUTOSAR Software Engineer at Pioneer R&D Europe
Successfully integrated the Vector Flash Bootloader (FBL) for both NXP and TI SoCs within the Ford FNV3 and FNV4 audio amplifier projects.
Achieved complete bootloader bring-up and ensured reliable operation, enabling secure and efficient firmware update capabilities.
Developed a valid approach for running the Vector FBL entirely from RAM on the TI SoC, addressing unique architectural and memory handling challenges.
Debugged and optimized NXP MCAL and TI MCAL configurations to ensure proper low-level hardware initialization.
Managed specific constraints of DDR-only bootloader execution on TI SoC, including memory mapping and execution flow.
Tools: Vector DaVinci Configurator, Vector CANoe
Languages: C, Python
Standards: AUTOSAR
Yoav N.
Last position:
Freelance Software Architect at Freelance Consultant
- Various small consultations, e.g. concepts and arcitectures.
- Updating my Matlab, Linux, IPv6, Cyber-Security, C++ (up to 23) and Python skills.
Krzysztof G.
Last position:
C++ Software Developer at HENSOLDT AG
Development of new simulator features and extension of existing modules using C++.
GUI design and implementation with Qt for Windows, including redesigns to improve usability and workflow.
Maintenance and expansion of existing codebase: refactoring, bug fixes, and modularization to support new capabilities.
Version control using Git.
Performance optimization of simulation to meet real-time constraints.
Creating and maintaining documentation: technical comments, design docs, API references and user manuals.
Led a redesign that improved operator workflow and reduced task completion time.
Extended simulator architecture to support multiple new scenario types while preserving backward compatibility.
Implemented refactoring and modularization that simplified maintenance and accelerated feature delivery.
Technologies: C++03, Qt4.6, QMake, Git, V-Model, Windows
André H.
Last position:
Linux IT Admin at ReiserST
- Development and maintenance of IT architectures with embedded Linux systems.
- Designing, implementing, and optimizing backend applications and script-based solutions.
- Analyzing and resolving issues, including troubleshooting and user support.
- Developing and implementing security concepts for cloud solutions.
- Administering networks (DHCP, DNS, NTP, VPN).
- Technologies: Linux, PowerShell, Bash, Python, Ansible, Kubernetes, GitLab CI.
- Methods: Kanban.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a R&D Software Engineer
Nearby freelancers
Professionals working in or nearby Munich, Germany

