MATLAB Experts in Stuttgart
matched in minutes from over 15,000 CVs with the power of AI.Hire experts who work with MATLAB, Simulink, and toolboxes for signal processing, control systems, data analysis, and model-based design. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Stuttgart, who have recently used MATLAB
Holger Beck
Last position:
Consultant for development support topics and standards at TeDiMoS GmbH
- Standards research "Product-/project-related for speed-controlled pumps".
- Support of internal development departments on standards issues nationally and internationally.
- Creation and maintenance of internal standards and test plans.
- Generation of technical requirements from normative specifications.
- Collaboration with authorities.
- Coordination with associations and organizations/authorities (VDE, UL, notified body EMC test).
Gildas Djomen
Last position:
System Team Lead Diagnostics – Hybrid & Electric Drives (HEV/MHEV/PHEV) for Transmission and Engine (NA/SA) at Stellantis e-transmission
- Technical lead of diagnostics activities for eDCT transmissions and drive systems in the area of hybrid (HEV), mild-hybrid (MHEV), and plug-in hybrid vehicles (PHEV)
- Responsibility for the development and validation of DTC strategies (OBD / EOBD) for markets in North and South America and the EU
- Coordination between interdisciplinary teams (system development, software, safety, calibration, after-sales)
- Creation and maintenance of diagnostic specifications (DID, DTC matrix, snapshot, freeze frame) according to STLA standards
- Support with troubleshooting, validation tests, EOL processes, and internal audits
- Technical interface to suppliers (Bosch, Valeo, etc.) in the area of actuators, sensors, and electric pumps
- Creation of diagnostic RFQ
Florin Mihailescu
Last position:
Program Manager – Batteries (EV-Electric Vehicle) at Da Vinci Engineering
- Main interface between customer, stakeholders and internal cross-functional teams (software, hardware, mechanical and suppliers)
- Ticket management of internal and customer problems using Jira
- Lead pre-analysis team to conduct first analysis and assignments of tickets to the responsible person and/or departments
- Define the interfaces of the problem resolution management process to engineering, change-request management and project management processes
- Facilitate regular meetings to track root-cause analysis and problem resolutions
- Monitor project progress and identify deviations in time, scope, cost and quality
- Lead projects through all quality gates and milestones until SOP
- Forecast, resource planning, controlling and cost estimation for running projects, new RFQs and customer changes
- Weekly reporting of project status to the Program Director
Jovan Jelic
Last position:
CSV Manager, Technical Engineering at CureVac Printer GmbH
- Assist with the development of system requirements and specifications to ensure requirements are testable and 21 CFR Part 11 requirements are met
- Coach implementation teams in the proper execution of validation documents
- Evaluate proposed changes to validated computer systems and recommend level of validation activities required
- Coordinate audits of internal computer systems validation activities, protocols and procedures, and prepare responses
- Identify and qualify all computer systems impacting cGMP operations using a risk-based methodology
- Develop CFR Part 11 computer systems validation plans, qualification test protocols, traceability matrices, reports, IQ/OQ protocols and all deliverables within the scope of the validation plan
- Develop and maintain test plans, test scripts and user acceptance tests and manage their execution
- Act as CSV lead for all validation projects and execute or oversee validation plans and documents
- Perform project management activities for the CSV process within the scope of system projects
- Work with project manager to include validation activities in implementation timelines
- Manage internal CSV resources to facilitate completion of qualification activities
- Ensure initiation, preparation and closeout of all CSV-related deviations, discrepancies and change control documents
- Work closely with Validation Manager and QA Compliance to ensure appropriate validation of cGMP computer systems
- Conduct or facilitate validation and 21 CFR Part 11 training
Noushiq Mohammed K A N
Last position:
Projects at Institute for Intelligent Systems
- Evaluation and analysis of camera-based traffic light and sign recognition system on various LLM-based autonomous driving systems (LMDrive, BEVDriver)
- Implemented VLM based traffic notice instruction generation unit for closed-loop autonomous driving system which alerts driver in unforeseen driving incidents
- Developed independent LLM-based local chatbot with Llama, DeepSeek and Qwen including MLflow evaluation framework
Michael Beck
Last position:
Developer/Consultant at Fresenius Medical Care
- Development of automated end-of-line tests (functional tests) for dialysis machines on a PLC test bench in a production environment
- Introduction of new technology based on Vector vTestStudio, CANoe, and Siemens S7 PLC
- Creating test concepts
- Implementing test cases and libraries in CAPL and C#
- Touch screen emulation and proprietary RPC (Remote Procedure Call) via CAN
- Connecting to the PLC (Siemens Simatic)
- Defining interfaces for device communication (vCDL)
- Defining user interfaces and linking to the frontend (JSON)
- Agile work using DevOps (Azure)
- Skills: CAPL, .NET, C#, vCDL, CANOpen, DevOps, PLC
- Tools used: Vector CANoe 18, vTestStudio 4, MS Azure DevOps, MS Visual Studio 2022, Mosquito MQTT, Git, Siemens TIA Portal
Sri Mojjada
Last position:
Electronics Engineer at Dausinger + Giesen GmbH
- Designs and develops new high-precision analog/digital PCBs for laser control systems using Eagle and KiCad.
- Leads hardware testing, failure analysis, and systems integration for all PCBs within high-power laser systems.
- Conducts component-level debugging on PCBs, tracing faults from power supply rails to communication lines (CAN, SPI) and sensor data (ADC/DAC).
- Identifies burned/damaged components, performs SMD/THT rework and soldering to repair and validate boards.
- Developed an advanced auto-alignment algorithm using Particle Swarm Optimization (PSO) and PID control in Embedded C. This firmware uses a 4-Quadrant-Diode (4QD) PCB’s ADC signals to control piezo mirrors, automatically maximizing the laser’s power position.
- Developed an Autonomous Laser Alignment System using a PIC18F26K83. Implemented a Bayesian Optimization algorithm to maximize optical power by controlling a 2-axis piezo inertia mirror mount.
- Designed a "Virtual Encoder" in software to track position for an open-loop system.
- Configured the Internal ADCC in Burst Average Mode to filter high-impedance photodiode noise.
- Interfaced with a PI E-870.41 driver using a custom 20kHz multiplexed pulse train.
- Developed a robust CAN Bootloader for the dual-core dsPIC33CH, enabling remote firmware updates. Solved deep-level bugs related to hardware timer conflicts, slave core fuse-bit mismatches, and CAN state management.
- Installs and integrates validated PCBs into the final laser systems, verifying all CAN, power, and I/O cabling and debugging any system-level hardware/software conflicts.
- Contributes to the development of the C++/Qt-based system control software, integrating CAN protocols to control and test all PCBs from a unified application.
Elvir BĂĽyĂĽkbayrak
Last position:
Software Architect and Software Developer at Noctica IT GmbH
- NocTime time tracking, workshop planner, meal delivery service app
- LLM-based chat bot to control the NocTime time tracking system via voice input
- New and further development of customer solutions based on the Noctica SAS app framework
- Technologies: Java 17, Spring Boot, JPA, Hibernate, JavaScript, TypeScript, Angular 20, Angular Material, React, C#, Docker, Bash, Git, GitLab, RedMine, SQL, DBeaver, MariaDB, PostgreSQL, Python, TensorFlow, Ollama, various LLMs
Orhun Suezer
Last position:
Independent Consultant
- Security, PMI and Agile project management projects and trainer
- Variety of projects with worldwide premium OEMs, Tier1s and Tier2s
- e.g. Panasonic Europe, Cymotive, Veoneer, Cyres, VW, BMW, Ford
Kavin Trivedi
Last position:
Freelance Software Expert – Functional Safety & AUTOSAR at Bosch
- Development and optimization of software architectures for safety-critical embedded systems in the automotive sector according to ISO 26262 and ASPICE.
- Performing safety analyses (FMEA, DFA, FTTI, HARA) for safety-relevant software.
- Technical consulting and support in acquisition processes for safety-critical software projects.
- Evaluating AUTOSAR architectures and integrating safety-relevant software solutions.
- Collaborating with OEMs and suppliers to ensure compliance with safety standards and process conformity.
- Leading functional safety assessments and ASPICE assessments.
- 2016–2019: Body Computer Module – Role as Lead Software Integrator. Responsible for the software integration of safety-critical ECUs, implementation of AUTOSAR software components, and system integration testing.
- 2019–2022: PowerNetGuardian – Role as Software Architect. Developed a safety-critical software architecture, ASIL decomposition, and created software safety requirements according to ISO 26262 and ASPICE.
- 2022–Present: PowerNetGuardian Plus – Role as Lead Software Architect. Responsible for the overall software architecture, safety and cybersecurity concepts, FMEA analyses, and technical consulting during OEM negotiations.
José Dias Afonso
Last position:
Software Automation Test Internship at PHILIPSMEDIZIN SYSTEME GMBH
- Develop and debug test automation scripts in Python and C# for medical software platforms.
- Support platform testing using HiL systems and Azure-based CI/CD pipelines.
- Create and maintain documentation parsing tools and factory test setup configurations.
Jiesheng Zhu
Last position:
Freelancer at Freelancer
- Design and optimization of LPG mounting bracket housing for commercial vehicle Daimler Truck using CATIA and Abaqus software
- Design, series support for plastic tank and steel tank systems including mounting concept on the body-in-white of various passenger car series from Daimler using Siemens NX Modeling and Sheet Metal software package
- Design of SCR tank system including mounting concept on the body-in-white of various passenger car series from Daimler using Siemens NX Modeling and Sheet Metal software package, produced with injection molding technology
- Design and series support for a conveying unit MFA2 Daimler using Siemens NX
- Design and simulation of body-in-white optimization for Great Wall Motor GWM pickup using CAITA and Abaqus Modeling and Sheet Metal software package
- Design of FTIV shut-off valve Padmini VNA Mechatronics Limited using Siemens NX Modeling and Sheet Metal software package, produced with injection molding technology, laser welded
- Design of wheel arch lining exterior for Mercedes GLC using Siemens NX, produced with injection molding technology
- Design of water injection system including mounting concept on the body-in-white of various passenger car series from Daimler AMG using Siemens NX Modeling and Sheet Metal software package, produced with injection molding technology
- Design and packaging study of hydrogen storage system including pressure cylinder (700 bar), mounting system, hydrogen line, manifold, pressure regulator, filler neck, etc. on the body-in-white of various passenger cars from Daimler using Siemens NX
- Design and integration of hydrogen storage system including pressure cylinder (700 bar), mounting system, hydrogen line, manifold, pressure regulator, filler neck, etc. on the body-in-white of various trucks from Voith using Siemens NX
- Design of body-in-white cover for Mercedes EQE SUV interior
Harshal Vaidya
Last position:
Project Intern at Global Shapers Stuttgart Hub
- Part of sustainability workshops and youth development sessions (“Purpose Factory”).
Harald Bergmann
Last position:
Software Architect at Amoria Bond
- Developed gateway demonstrator
- Defined system requirements for topology and data concentrator
- Designed zonal controllers for Leoni
Timon Höfer
Last position:
Product Owner & AI Research Scientist at Porsche Digital
From PoC to Production!
Discover over 15,000 top freelancers
Statistics of experts using MATLAB
Aggregated from the professional profiles of matched freelancers.
Experience
14 years (Germany: 15 years)
Position duration
1.9 years (Germany: 5.1 years)
Positions per freelancer
10 (Germany: 9)
Top business areas
Product Development, Quality Assurance, Information Technology
Top industries
Manufacturing, Automotive, Information Technology
Certification focus areas
Quality Assurance, Project Management, Information Technology
Bachelor's degree or higher
100% (Germany: 97%)
Master's degree or higher
92% (Germany: 84%)
Doctorate
8% (Germany: 24%)
Certifications per freelancer
1 (Germany: 2)
Most common languages
German, English, French
Speak two or more languages
100% (Germany: 99%)
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Stuttgart are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Stuttgart using MATLAB
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
MATLAB work
MATLAB is used for technical computing, simulation, and data analysis. Teams use it to explore data, build models, test algorithms, and prepare production-ready calculations for engineering and research work. It is common in systems where clarity, reproducibility, and numeric accuracy matter.
Typical delivery
- Signal processing and image analysis
- Control design and simulation
- Data cleaning, modeling, and visualization
- Prototype scripts and reusable functions
- Reports, plots, and shared analysis workflows
Tooling around it
MATLAB rarely stands alone. Strong specialists also work with Simulink, toolboxes, app design, and file formats used in engineering teams. They know how to structure code, manage large data sets, and make results easy for others to review and extend.
When to bring help
Companies bring in freelance MATLAB expertise when internal teams need extra capacity, a specific toolbox, or help fixing an old code base. It also helps when a model must be documented, validated, or handed over cleanly to another team. In Stuttgart, this is especially useful for engineering-led work that needs fast, focused support.
What strong specialists do
Good MATLAB professionals write clean scripts and functions, not just quick notebook-style analysis. They understand numerical methods, edge cases, and how to turn ad hoc work into maintainable code. They also communicate clearly so engineers, analysts, and managers can use the output.
Local fit
MATLAB is often a fit for teams in automotive, manufacturing, mobility, and industrial R&D. In Stuttgart, many projects need experts who can work with technical stakeholders, handle English documentation, and join on-site sessions when hardware, test benches, or existing code bases make that easier.
Frequently asked questions
Everything clients usually want to know about MATLAB, in one place.
MATLAB is used for technical computing, simulation, and analysis where numeric work needs to be precise and traceable. Companies hire specialists for data exploration, algorithm prototyping, signal processing, control work, and reporting that later feeds engineering decisions.
MATLAB is often chosen when teams want a focused environment for matrix-heavy calculations, engineering workflows, and Simulink-based modeling. Python and R can be better for general software stacks or broad statistical work, but MATLAB is often stronger when the project is tied to technical tooling and existing engineering assets.
MATLAB and Simulink are often used together when the work moves from analysis into system modeling and dynamic simulation. If the project includes control systems, block diagrams, or model-based design, a specialist who knows both can save time and reduce handoff issues.
A strong MATLAB specialist usually also understands data handling, numerical methods, version control, and the toolboxes relevant to the project. Depending on the assignment, signal processing, statistics, image processing, embedded workflows, or report automation may matter too.
MATLAB tasks vary a lot. A clean data analysis script may need a focused specialist, while simulation, validation, or code modernization usually needs someone who has worked with larger technical systems before. The key is proven work on similar models, data, or toolboxes.
Yes, many MATLAB assignments can be done remotely, especially analysis, refactoring, and documentation. On-site work can still help when the project depends on lab hardware, test systems, or close collaboration with engineers in Stuttgart. A good freelancer should be comfortable with both setups.
Look for clear code structure, sensible function design, and a habit of explaining assumptions. A strong MATLAB professional can show scripts, models, or reports that are easy to review, and can describe why a method was chosen rather than just showing the result.
Often yes. MATLAB is common in long-lived engineering environments where existing scripts, toolboxes, and validation work already exist. A specialist can help clean up older code, keep results stable, and decide when a partial rewrite is worth the effort.
The average hourly rate of freelancers in Stuttgart, Germany who have used MATLAB in their recent projects is 80 €, which corresponds to a daily rate of about 638 € based on an 8-hour working day.
Of the freelancers in Stuttgart, Germany who have used MATLAB in their recent projects, 100% hold at least a Bachelor's degree, 92% hold at least a Master's degree, and 8% hold a doctorate.
On average, freelancers in Stuttgart, Germany who have used MATLAB in their recent projects have 14 years of professional experience, with a single engagement typically lasting around 1.9 years.
The most common languages among freelancers in Stuttgart, Germany who have used MATLAB in their recent projects are German (100%), English (100%), and French (27%).
The most common industries among freelancers in Stuttgart, Germany who have used MATLAB in their recent projects are Manufacturing (80%), Automotive (73%), and Information Technology (47%).
The most common business areas among freelancers in Stuttgart, Germany who have used MATLAB in their recent projects are Product Development (100%), Quality Assurance (73%), and Information Technology (60%).
Main locations of FRATCH Experts, who have recently used MATLAB
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin 
Hamburg 
Munich 
Cologne 
Frankfurt 
Dusseldorf 
Dortmund 
Essen 
Dresden 
Hanover Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
