
HVAC Experts in Germany
matched in minutes by AIHire experts who design, size and optimize heating, ventilation and air conditioning systems, connect building controls and support commissioning. FRATCH matches you quickly with vetted, available freelancers who fit your technical and project needs.
Meet FRATCH Experts in Germany, who have recently used HVAC
Lily M.
Last position:
Manager, GDC Energy Management & Governance at NTT Global Data Centers
- Manage global energy-management governance and performance reporting across EMEA, APAC, the Americas and India.
- Run the monthly tracking cycle for efficiency initiatives (kWh and cost savings, forecast vs actual, KPI definitions) with regional energy and operations teams.
- Built a multi-region anomaly and query tracker and an ISO 50001:2018 internal-audit preparation workbook.
- Designed the technical assessment and scoring rubric for hiring an EMEA metering energy specialist.
Harald T.
Last position:
Certified Technical Trainer at Liebherr-Electronics and Drives GmbH
My work at Liebherr Electronics and Drives GmbH was highly rewarding, both professionally and personally. During this time, I was responsible for designing, developing and delivering training measures in the areas of high-voltage technology, energy storage systems and high-voltage battery repair. My responsibilities also included digitizing and optimizing training materials, teaching current safety and quality standards, and providing practical training for specialist staff.
Due to the permanently long commuting distance between my home in Karlstein and my place of work, I decided to focus my professional future on my home region again in the long term.
Activities & Skills:
- Technical training and legally compliant concept development in the following areas: teaching knowledge in electronics, high-voltage systems, high-voltage energy storage systems, high-voltage battery repair
- Structured analysis of technical relationships and troubleshooting
- Creation, digitization and optimization of technical training and work documents
- Reviewing and improving quality standards.
Manfred S.
Last position:
HSPV Herne at HTI
HSPV Herne
Managed drywall work. Handed over the supervised areas three months before the agreed completion date despite the insolvency of the main contractor.
Stefan O.
Last position:
Organisational Consultant at Notus Energy
Operator/general contractor of wind and solar parks, revenue approx. € 150 million €
- Design of project system
- Digital transformation of finance and controlling
- Process analyses
- Implementation in InforLN Cloud
Frank M.
Last position:
Plan & Code Automation UG
- Operations and rehabilitation
- During this time, development of:
- Websites zentivo-holding.com zyntra3d.com plancodeautomation.com
- Stock trading software
- Automated trading of all financial instruments listed on the stock exchange, with AI integration
- Project management software
- Automated project administration and project management with automated creation of material lists, electrical schematics, PLC programs, HMI programs, AI functions in control technology, project schedules and cost calculations, as well as quotation preparation and cost tracking.
- AI integration
- 3D printing management
- Various methods for creating 3D models from photos, videos or drawings.
- Creation of files suitable for 3D printing, 3D printer management via API.
- AI integration
Tools: Visual Studio, Codex and Cursor, HTML, Java, Python, PHP, C#, Python, SQL, Jason Script.
Youness R.
Last position:
Communication modernization and recipe management between S7-300, S7-1500 and WinCC V7 at Siemens AG
- Consulting and development of suitable communication concepts between S7-300 and S7-1500, taking the existing PROFIBUS infrastructure into account
- Technical support for connecting the S7-300 controllers to the existing recipe data block of the S7-1500
- Assisting in the development of the communication sequence for recipe access (read, write, acknowledge, status handling)
- Configuration of S7 communication (PUT/GET)
- Creation and adaptation of WinCC V7 scripts (C scripts and VBS scripts) for WinCC-based recipe management
- Development, optimization, and integration of recipe processes into the existing WinCC project structure
- Commissioning of the new communication interfaces and recommissioning of the recipe logic on existing systems
- Creation of technical documents: communication sequences, functional descriptions, commissioning documentation
Loretta A.
Last position:
Master Thesis Student at Deutsches Zentrum für Luft- und Raumfahrt (DLR), Institut für Future Fuels
- Managed end-to-end data workflows for LCA and carbon footprint assessments, including data collection, validation, structuring, and LCI modeling for metal alloys, ensuring high data quality and traceability.
- Developed a basic Excel automation tool to simplify carbon footprint calculations of metal alloys, replacing repetitive modelling in the software that previously took several hours.
- Communicated environmental impact results through quantitative analysis, visualizations and reports to support the broader project strategy.
- Performed environmental hotspot and scenario analysis to identify key impact drivers and assess opportunities for emissions reduction.
Jürgen K.
Last position:
Freelance Consultant Controlling & TDD at self-employed
- (part-time) self-employed (parallel)
- TDDs and consulting on special projects (data centers and military buildings)
Thomas P.
Last position:
Product Owner & AI Automation Architect (B2B) at Ihre-Hygieneberatung
Development of a digital audit application for inspections in medical facilities. The goal is to connect on-site data collection, voice recording, documentation and downstream processes in one end-to-end, AI-supported workflow.
Design and development of a Flutter audit app with Claude Code for the structured execution and documentation of inspections.
Processing of voice recordings captured in the app through automatic transcription and AI-supported creation of structured inspection reports, followed by an approval process
Connecting various data sources such as email, Odoo 19, attendance records and Google Drive via n8n to automate billing and follow-up processes
Automatic provision of required documents and email delivery through n8n-controlled workflows, including the use of LLMs for text creation
Skills: Flutter, Claude Code, LLM Integration, n8n, Odoo 19, Google Drive, Process Automation
Samer K.
Last position:
Assignment to build up a quality management system at HQC
- Building up the documentation for a management system for a certification body including:
- Company policy
- Objectives
- SOPs for all processes
- Work instructions (WI)
- Process flow charts
- Forms for different activities
- Lists as appendices
- Record templates
Derek B.
Last position:
EMEA Channel Certification & Training at Dell
- Launched Dell’s first partner certification program and digital learning center, establishing consistent standards for sales capability across EMEA.
- Designed and delivered training for product knowledge, solution selling, and partner enablement.
- Conducted needs analyses across markets to tailor content to industry sectors and partner maturity levels.
- Managed cross-functional stakeholders and external providers to ensure consistent quality.
Gregorio S.
Last position:
Founder at Exceleration
Exceleration focuses on the design and implementation of structured Excel-based management systems for SMEs.
The project helps companies transform fragmented spreadsheets into integrated operational tools that support planning, automation, and decision-making.
Typical solutions include:
- Production and capacity planning systems
- KPI dashboards and operational reporting
- Financial monitoring and business case modelling
- Automation of recurring workflows through VBA and Power Query
- Integration of operational data across departments (operations, finance, administration)
The goal is to create simple but robust management infrastructures that increase transparency, reduce manual work, and improve operational control.
Ali D.
Last position:
Software Engineer Industrial IT & PLC at Yaskawa Europe GmbH
Designed and implemented the complete data flow architecture for the Mercedes-AMG battery case production line, from raw material processing to end-customer traceability.
Developed MQTT-based communication protocols for Siemens S7 PLC controllers to enable efficient real-time data exchange between machines and supervisory systems.
Architected a local Ubuntu-based industrial server, integrating Node-RED for data collection, MySQL databases running in Docker containers, and automated data pipelines.
Commissioned connectivity of 52 Siemens PLCs and 32 Yaskawa welding and handling robots.
Designed and implemented HMI and visualization systems to support operator interaction and production monitoring.
Designed a 2D digital twin of the production floor, visualizing real-time process data from 26 Siemens PLCs and 18 Yaskawa welding robots via Stromquelle interfaces.
Implemented data collection and camera-based measurement systems for welding quality control and automated defect visualization.
Designed and optimized MySQL database structures, including stored procedures for data processing and performance analytics.
Annette K.
Last position:
Parr Engineering & Prüfstandtechnik
- Planning new installation of relocated equipment
- Industry: Parr Engineering & Test Bench Technology
- End customer: Bosch Brazil
- Planning installation at a new site
Gerald S.
Last position:
FMEA Moderator / Facilitator at Schneider Engineering
- Facilitation and training of Design-FMEA/DFMEA and Process-FMEA/PFMEA with APIS IQ-FMEA license or Plato e1ns Software including Boundary Diagram
- Facilitated projects mainly in English for Tier1 or OEM:
- Development of AI FMEA software (artificial intelligence) from 2026-05-01
- Process-FMEA seamless stainless steel tubes from 2026-02-01
- Process-FMEA high performance E-drive (Rotor + Stator) (BMW) from 2024-05-01 to 2025-03-31
- System-/Design-FMEA Industry 4.0 digitalisation product from 2022-09-01 to 2023-02-28
- Design- & Process-FMEAs locking and camera systems from 2022-09-01 to 2023-09-30
- Process-FMEAs aviation/aerospace components from 2022-09-01 to 2025-05-31
- Process-FMEA roof systems/sun roofs from 2022-01-01 to 2024-01-31
- System-/Design-FMEA steer by wire from 2022-01-01 to 2023-06-30
- Design-FMEA actuators from 2021-03-01 to 2021-08-31
- Design-FMEA drive by wire system from 2020-03-01 to 2021-12-31
- Design- and Process-FMEA dashboard/IP assembly from 2020-02-01 to 2022-10-31
- Design-FMEA high voltage connector for battery management system from 2020-03-01 to 2020-04-30
- Design-FMEA interior door panels from 2020-02-01 to 2025-04-30
- Design-FMEA domestic appliance from 2019-08-01 to 2020-02-29
- Design-FMEA cobot transmission from 2019-02-01 to 2023-12-31
- Design-FMEA E-drive from 2018-09-01 to 2019-01-31
- Design-FMEA convertible roof system (AMG) from 2018-07-01 to 2019-03-31
- Design-FMEA electrical wheel hub motor from 2017-04-01 to 2018-06-30
- Design-FMEA motorbike frame (BMW) in 2017-06-01
- External member in FMEA circle of experts of a Tier 1 from 2016-01-01 to 2019-12-31
- Design- and Process-FMEA E-axle gearbox from 2016-01-01 to 2018-06-30
- Design-FMEA seating system (AMG) from 2014-11-01 to 2014-12-31
- Design-FMEA electromechanical rolling stabilizer (BMW, Bentley, Porsche, VW) from 2014-09-01 to 2016-06-30
- Requirements analysis Li-Ion battery system from 2014-08-01 to 2014-09-30
- Further facilitation of FMEAs for car body, climatization, roof, light, fuel, gas, ignition systems, plastic moulding, heating systems, ship & stationary engines, turbochargers, reactive power controller, control units, high performance engines, mechatronical chassis actuators, e-mobility and e-drives in marine, motorbike, automotive, rail, aviation/aerospace & energy for customers such as Webasto, McLaren, Ferrari, MAN, Changan, Audi and others.
Discover over 15,000 top freelancers
Statistics of experts using HVAC
Aggregated from the professional profiles of matched freelancers.
Experience
26 years

Position duration
3.7 years

Positions per freelancer
15

Top business areas
Project Management, Product Development, Quality Assurance

Top industries
Manufacturing, Automotive, Energy

Certification focus areas
Information Technology, Quality Assurance, Product Development
Bachelor's degree or higher
82%
Master's degree or higher
48%
Doctorate
9%

Certifications per freelancer
3

Most common languages
German, English, French

Speak two or more languages
96%
Based on our profile pool as of 18 Nov 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using HVAC
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
HVAC experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (74%)
- Automotive (53%)
- Energy (46%)
- Construction (40%)
- Information Technology (40%)
- Professional Services (37%)
- Education (29%)
- Aerospace and Defense (23%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
What HVAC covers
HVAC stands for heating, ventilation and air conditioning. It covers the systems that control temperature, humidity, air movement and indoor air quality in buildings. Projects can include heat pumps, boilers, chillers, air-handling units, ductwork and refrigeration equipment.
Systems and design
Strong HVAC work connects thermal performance with practical installation and operation. Experts may calculate heating and cooling loads, select equipment, plan pipe and duct routes, define ventilation rates and prepare specifications. They also consider energy use, acoustics, maintainability and available plant-room space.
Controls and tools
HVAC projects often combine mechanical systems with electrical controls and building automation. Useful experience may include:
- Building Management Systems and BACnet integration
- Sensors, actuators, control sequences and commissioning
- Revit, AutoCAD and BIM-based coordination
- Energy modelling, load calculations and system documentation
Where companies use it
HVAC supports homes, offices, hospitals, hotels, factories, laboratories, retail sites and data centres. In Germany, specialists may contribute to both new construction and refurbishment, including projects that replace fossil-fuel heating or improve ventilation in occupied buildings. Their deliverables can range from concept studies and tender documents to site supervision, testing and handover records.
When freelance expertise helps
Companies bring in freelance HVAC expertise when internal capacity is limited, a project needs an independent review or a specialist must join during a critical delivery phase. Common signals include:
- A heating, cooling or ventilation concept needs validation
- BIM coordination reveals clashes between building systems
- Controls do not perform as specified during commissioning
- An energy retrofit needs a practical implementation plan
Remote work suits calculations, drawings, specifications, modelling and documentation. Site surveys, installation reviews and commissioning require presence at the facility; teams in Germany should also clarify language needs for contractors, operators and local project records.
What distinguishes strong experts
The best HVAC professionals explain design choices in terms of comfort, safety, energy use and lifecycle effort. They understand how equipment behaves in real operating conditions, not only on a drawing. Look for evidence of clear calculations, coordinated plans, robust control sequences, disciplined commissioning and concise handover documentation. Experience with adjacent electrical, plumbing, fire-safety and building-automation interfaces is equally valuable.
Frequently asked questions
Need clarity? These are the questions we hear most often about HVAC.
HVAC systems provide heating, ventilation and air conditioning for buildings and industrial spaces. They regulate temperature, humidity and air quality through equipment such as heat pumps, boilers, chillers, air-handling units, fans and control systems.
Heating, Ventilation and Air Conditioning is the broader field, while a heat pump or ventilation-only project focuses on one part of the building climate system. A strong HVAC expert can coordinate those parts and assess how equipment, controls, distribution and building use affect the complete result.
HVAC work often overlaps with building automation, electrical controls, plumbing, refrigeration, BIM coordination and energy modelling. Knowledge of BACnet, Revit or AutoCAD can be important when the assignment includes system integration, coordinated drawings or commissioning.
HVAC experience should match the risk and scope of the assignment. A professional handling equipment selection may need a different background from one leading hospital ventilation, industrial refrigeration or complex commissioning, so review comparable systems, deliverables and project phases rather than relying on a generic experience label.
HVAC tasks such as load calculations, modelling, specifications, drawings and controls documentation can often be completed remotely. Surveys, installation inspections and commissioning require site access, so companies in Germany should define travel needs, site safety arrangements and the working language in advance.
HVAC specialists should be able to show how they approach assumptions, equipment selection, coordination and verification. Ask for anonymized examples of calculations, drawings, control sequences or commissioning records, then test whether the expert explains trade-offs clearly.
HVAC controls can fail when sensors are poorly placed, sequences are incomplete, equipment signals do not align or commissioning is rushed. A capable expert traces the issue from the control logic and wiring through to actual operating conditions, then documents the corrected sequence and acceptance checks.
HVAC design is effective when it fits the building, operating profile, available infrastructure and maintenance model. For projects in Germany, teams should also align the work with applicable technical requirements, procurement documentation and coordination processes while keeping comfort, efficiency and serviceability visible throughout the design.
The average hourly rate of freelancers in Germany who have used HVAC in their recent projects is 99 €, which corresponds to a daily rate of about 792 € based on an 8-hour working day.
Of the freelancers in Germany who have used HVAC in their recent projects, 82% hold at least a Bachelor's degree, 48% hold at least a Master's degree, and 9% hold a doctorate.
On average, freelancers in Germany who have used HVAC in their recent projects have 26 years of professional experience, with a single engagement typically lasting around 3.7 years.
The most common languages among freelancers in Germany who have used HVAC in their recent projects are German (100%), English (95%), and French (23%).
The most common industries among freelancers in Germany who have used HVAC in their recent projects are Manufacturing (74%), Automotive (53%), and Energy (46%).
The most common business areas among freelancers in Germany who have used HVAC in their recent projects are Project Management (76%), Product Development (69%), and Quality Assurance (67%).
Main locations of FRATCH Experts, who have recently used HVAC
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!

Munich
Frankfurt