Ansys Experts in Germany
matched in minutes by AIHire experts who model complex physics, validate product designs and connect Ansys Workbench with engineering workflows. Get precise matches with vetted, available freelancers who can support your project remotely or on site in Germany.
Meet FRATCH Experts in Germany, who have recently used Ansys
Saurabh H.
Last position:
Master Thesis, Simulation at AVL in Germany
- Engineered and validated a full-vehicle thermal management system in MiL simulation, achieving 95% correlation accuracy against real-world vehicle measurements, directly supporting virtual calibration and reducing dependency on physical test benches.
- Led end-to-end Model-in-the-Loop (MiL) simulation development using AVL CruiseM and MATLAB/Simulink, covering system architecture, parameterization, and validation.
- Acquired and analyzed vehicle sensor measurements (temperature, volumetric flow rate) using dSpace MicroAutoBox (HiL) and IPEmotion, translating raw data into actionable calibration insights.
- Calibrated and optimized critical actuators and thermal components - pumps, valves, electric heaters, heat exchangers, and refrigerant circuits and identified/integrated previously missing physical behaviors to close the gap between simulated and real vehicle performance.
- Designed and tuned an integrated actuator controller with precisely calibrated parameters, producing a high-accuracy virtual model adopted for downstream development use.
Olfa A.
Last position:
Senior Embedded Software Engineer / Function Developer at Enginius GmbH (FAUN GROUP)
- Developed model-based software for hydrogen tank control units using MATLAB/Simulink, aligned with ISO 26262 functional safety requirements
- Performed system integration and software verification across MIL and HIL environments using dSPACE and Vector tools
- Defined software architecture (SADS) with interface specifications for CAN, analog, and digital communication protocols
- Generated production-ready embedded C code using Simulink Embedded Coder; created and maintained A2L calibration files with CANape
- Designed and executed MIL/HIL test cases ensuring full coverage of functional and safety requirements
- Implemented CODESYS PLC applications on IFM ecomatController; applied CAN and Modbus TCP/IP communication protocols
- Contributed to HMI/UI development using Qt/C++ on Linux (Qt Creator)
- Applied agile Kanban workflow with Git-based version control (Bitbucket)
Tools: MATLAB, Simulink, CANape, CANalyzer, PCAN-View, Embedded Coder, CODESYS, TTC2038/PXROS, Codebeamer, Jira, Git
Vinod G.
Last position:
Freelancer: SAP MDG Consultant at Logistics service provider
- Support for one of the largest logistics service providers in handling ServiceNow tickets in the areas of SAP MDG, Business Partner (BP), customer and supplier master data
- Technical analysis and resolution of tickets through in-depth review of various database tables
- Creation and maintenance of accounting clerks in the system
- Deactivation of company codes using transports
- Carrying out mass changes with LSMW (Legacy System Migration Workbench)
Vaibhav G.
Last position:
Expert Software & Functions Engineer at AVL Software & Functions GmbH
E-Drive Control
- Performed Model-Based Development (MBD) of application software (ASW) functions for E-Drive control using AVL & customer toolchains
- Translated product requirements into scalable, high-performance Simulink models for high-visibility projects, ensuring compliance with V-Model, AUTOSAR, ASPICE, ISO 26262, MAAB, MISRA, MXAM
- Automatic code generation (.c, .h, .arxml) using Embedded Coder
- Analyzed and derived system and ASW requirements, along with test cases, using PTC Integrity, CodeBeamer & PikeTec TPT
- Performed Verification & Validation of ASW using MIL/SIL/HIL, model/code coverage, exception report, req. & test case traceability
- Reviewed requirements, test cases and ASW, providing feedback to testing & development teams to drive bug fixes & improvements
- Created signals in Visu-IT-ADD & Vector DaVinci Developer Classic
- Documented ASW functions using Visu-IT-FunDoc & customer tool
- Updated enterprise architecture (EA) framework for system & ASW
- Created whitebox specifications for Inverter subsystem using Visio
- Commissioned & tested Inverters on Power HIL
- Mentored colleagues to foster collaboration & knowledge sharing
Chenchen C.
Last position:
Patent Engineer (European patent attorney candidate) at Vossius & Partner
- Patent application: European patent drafting and prosecution
- LLM practicing: Developed LLM-based tools for automated patent data retrieval, applying Python scripting to accelerate technical reviews.
Enrique G.
Last position:
Security Architect at Capgemini
I implemented a Zero-Trust architecture for robust, military-grade maritime container mini data centers based on VMware & Tanzu to support containerized GIS workloads for ground forces. The main focus was on securing communications, workload protection, and data access in contested electronic battle environments affected by jamming, interception, signal manipulation, and constantly changing operational conditions. I designed and architected use cases so that every element of workload, identity, and system could continue to operate independently and securely even in degraded or disrupted scenarios. In parallel, I defined the enterprise and solution security architecture with LeanIX, Bizzdesign, and HOPEX as enterprise architecture, repository, and governance platforms to maintain architecture inventory, relationships, traceability, target pictures, and security governance in complex environments. For the architectural designs, I used Sparx Enterprise Architect to describe formal architecture views, interfaces, trust boundaries, and system architecture in both IT and OT environments. IriusRisk was used for threat modeling of the solution to identify architecture-driven risks, derive security requirements, and detect countermeasures and design gaps directly from the solution models. Risk and compliance management was supported with Archer. Architecture decisions, control gaps, and operational risks were translated into controlled governance and auditable compliance measures. For documentation, collaboration, and visual design, I used Confluence to maintain Architecture Decision Records, Security Blueprints, and workflows. I used Lucidchart and draw.io to create design artifacts tailored to stakeholders. I also defined OT security concepts with support from electrical and mechanical engineers in the areas of oil, vehicle onboard systems, rail, power plants, pharma, gas turbines, and nuclear technology. I created the end-to-end OT security strategy, starting with global policy, developed into standards and procedures, and finally aligned with Bell-LaPadula, Purdue Model, SABSA, TOGAF ADM, CENELEC 50701, IEC 62443, and NIST standards. In addition, I worked with engineering team leads to identify critical KBP assets and place them under protective measures that segmented SCADA, PLC, and HMI assets. I drove collaboration between Security, IT, and OT teams to create standardized workflows and use cases for the OT security solution catalog, while integrating Defense-in-Depth and Zero-Trust principles into operational environments. A key part of my work was integrating multidisciplinary engineering, security, and operations stakeholders into a unified security blueprinting strategy and ensuring that architecture, threat modeling, governance, and documentation were technically strong and operationally practical.
Gregor P.
Last position:
Engineering Data Management Project Manager
Technical and commercial risk assessment for an investment project in the hardware sector (scaling potential, liability risks, operational processes) Process consulting for two SMEs in the engineering environment, focusing on workflow digitization, PLM
Thomas L.
Last position:
Consultant for AI-driven process automation at Lumiz
AI-driven automation of purchasing on a printing company's website, including selecting delivery times, order options, ordering, payment, and uploading print data from the Lumiz Cloud.
Ulm P.
Last position:
DataStage ETL Expert at ING Bank
- Datastage 11.7, dbt, Oracle 19, Python 3.12 / PySpark 3.5, Azure GitHub, Azure DevOps, Automic
- Development of migration jobs to transfer data from the collection DWH to the new Risk Mart, as well as development of ETL pipelines to migrate historical data from the old Mart to the new Risk Mart.
- Storage of the silver layer on Hadoop and the gold layer in Oracle.
- Translation of DataStage jobs into dbt to publish reporting data in Google Cloud to a PostgreSQL database.
- Creation and optimization of complex SQL queries for data extraction from a data vault, taking into account historical data in the point-in-time tables.
- Creation of Oracle table definitions (DDL) and adjustment of existing stored procedures.
- Versioning changes in GitHub and deployment via the CI/CD portal.
- Refactoring long-running DataStage jobs into Python using PySpark to reduce server load.
- Migration of SAS scripts to PL/SQL, including new development of distribution functions that have no direct equivalent in Oracle.
- Development of Automic jobs to run DataStage pipelines and Python scripts (PySpark jobs) that control the population of the SME and institutional risk tables in the Risk Mart and perform business calculations.
- Participation in the agile process, including creating user stories, estimations, and planning in Azure DevOps.
- Handling Azure DevOps tickets and close collaboration with testers and business teams for error analysis and resolution.
Kiran Kumar K.
Last position:
Applied NLP: Word-Level Encoding for Smarter Event Predictions at University of Siegen
- Engineered 12+ Seq2Seq models (LSTMs/GRUs) to train an AI model, supporting AI Agent Evaluation Analyst and online projects in complex systems.
- Conducted 15+ experiments to improve forecasting accuracy by 28%, applying analytical thinking and testing models for QA and edge case coverage.
- Researched 20+ papers as a consultant to guide Large Language Model design, ensuring logical implications and domain of expertise alignment.
- Saved 40% compute time via model compression with reusable PyTorch framework, aiding developers and writers to suggest refinements and improve policies.
Reuf K.
Last position:
Independent Mechanical Design Engineer at Herrenknecht Vertikal GmbH (Herrenknecht AG)
- Development and design of a new oil drilling machine for the Beatrice oil platform, Scotland
- Concept development of the Pipe-Overdeck work platform with crane, total load 200 tons
- Static FEM calculation and CFD flow calculation for the safe drainage of oil-contaminated wastewater
- CAD: CREO, Model Manager, SAP
Michael S.
Last position:
Interim Manager – Technical Project Management at Abbott Automation Solution GmbH
- Product adaptations and new developments according to FDA guidelines
- PLM for modules and accessories in coordination with product management
- Leading the cross-functional team
- Preparation for the market launch in the USA
- Leading new product developments in hardware and software
- Quality improvement measures
Ricardo C.
Last position:
Engineering Freelancer / Plant Design Project Engineer at Dipl. Ing. SCHERZER GmbH
- Planning and design of plants using AutoCAD Plant 3D, Inventor, Advance Steel, Navisworks
- Review of planning documents such as concepts and design reports, R&ID
- Processing and creation of pipe classes
- Creation and development of piping routes in 3D plant models
- Creation of isometrics of piping systems and special supports
- Coordination of involved trade specialists, foundation planning
- Consulting in project development and execution of projects in plant engineering, chemical engineering, and refinery construction
- Coordination with suppliers for basic engineering and tender preparation
- Management of all relevant engineering activities to create a technical concept (scope definition)
Josef E.
Last position:
Development service provider, mechanical engineering, design, calculation, certified project management at CAE Consulting Engineering GMBH
I am a development service provider in mechanical engineering with experience as interim assignment for all functional areas designer, development engineer design manager development manager calculation engineer, FEM, MKS, CFD, vibrations, kinematics, dynamics, statics certified project manager according to IHK industry standard, patent engineering – invention exploitation technical programmer / MATLAB, MATHEMATICA, MAPLE, MATHCAD technical managing director interim manager
[link]
[link]
Start: by agreement, based on your wishes and needs, fully flexible, permanent or fixed-term, temporary work, … etc. Compensation: within your planned budget for the position, by agreement
Please email, send references, certificates, CAD, FEM, MKS, CFD, project management, innovation proofs - patents ... etc.
Alexander M.
Last position:
Layout Planner at Yaskawa Europe GmbH
Providing engineering services under a temporary employment contract (ANÜ) at client companies.
Designed and developed two welding robot cells for the client Purem, including creating detailed CAD drawings with SolidWorks for proposal preparation
Structural design of the A3 robot cell line in the Boysen project using SolidWorks
Created a comprehensive PowerPoint presentation with concepts and analyses for removing robots, workpiece positioners, and equipment from the cells of a 5000 m² Ford automotive battery production hall in the USA
Developed an optimized concept for assigning manufacturing processes and cell enclosures for the Ford automotive battery production hall in the USA
Discover over 15,000 top freelancers
Statistics of experts using Ansys
Aggregated from the professional profiles of matched freelancers.
Experience
15 years
Position duration
5.6 years
Positions per freelancer
8
Top business areas
Product Development, Research and Development, Quality Assurance
Top industries
Manufacturing, Automotive, Education
Certification focus areas
Information Technology, Product Development, Project Management
Bachelor's degree or higher
96%
Master's degree or higher
71%
Doctorate
29%
Certifications per freelancer
2
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 19 Sep 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Discover detailed Ansys rate benchmarks:
Explore rate insightsAverage rates of experts in Germany using Ansys
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 19 Sep 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Ansys experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (82%)
- Automotive (50%)
- Education (34%)
- Energy (34%)
- Aerospace and Defense (28%)
- Information Technology (20%)
- Construction (18%)
- Healthcare (18%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Simulation Scope
Ansys is a multiphysics simulation suite used to predict how products and systems behave before physical testing. Companies apply it to structural mechanics, fluid flow, heat transfer, electromagnetics, acoustics and coupled physics. It supports virtual validation for components, assemblies and complete systems across industrial engineering.
Core Products
The Ansys ecosystem includes Ansys Mechanical for structural analysis, Fluent for computational fluid dynamics, HFSS for electromagnetic simulation and Maxwell for electrical machines. Ansys Discovery supports interactive concept exploration, while Ansys Granta helps teams manage materials data. Ansys Workbench connects many of these workflows in one project environment.
Typical Deliverables
- Finite element models for stress, vibration, fatigue and nonlinear behaviour
- CFD studies for airflow, cooling, pressure loss and combustion
- Electromagnetic models for antennas, motors and high-frequency hardware
- Design studies, parameter sweeps and optimisation reports
- Correlation between simulation results and laboratory measurements
These deliverables help teams reduce physical prototypes, investigate failure modes and make design decisions with traceable engineering evidence.
When Expertise Helps
Companies bring in freelance Ansys specialists when internal teams face a complex model, a demanding release schedule or a temporary capacity gap. Support is valuable during model setup, solver selection, mesh strategy, convergence analysis and result interpretation. In Germany, specialists may work remotely or coordinate directly with manufacturing, automotive, energy or aerospace teams on site.
Connected Skills
Strong Ansys professionals understand more than the user interface. They combine finite element methods, fluid mechanics, heat transfer or electromagnetics with CAD preparation and engineering judgement. Useful adjacent skills include Python or MATLAB automation, parametric optimisation, high-performance computing, PLM integration and the clear documentation of assumptions and boundary conditions.
Quality Signals
Look for professionals who can explain why a model is physically sound, not only produce colourful plots. Relevant evidence includes mesh-independence checks, sensible material data, verified boundary conditions, solver convergence and comparison with test results. A capable specialist also states uncertainty, records model changes and turns simulation output into decisions that designers and manufacturing teams can use.
Frequently asked questions
Everything clients usually want to know about Ansys, in one place.
Ansys is used to simulate how products behave under mechanical, thermal, fluid, acoustic and electromagnetic loads. Companies use Ansys to test concepts virtually, improve designs and investigate risks before committing to physical prototypes.
Ansys offers a broad collection of solvers and a mature workflow around Mechanical, Fluent, HFSS and Workbench. Abaqus is often chosen for advanced nonlinear and material modelling, COMSOL for flexible multiphysics formulation, and Simcenter for close integration with Siemens design and test processes; the right choice depends on physics, existing data and team skills.
A strong Ansys freelancer should understand the relevant physics and finite element or CFD theory behind the model. CAD cleanup, material data, meshing, Python or MATLAB automation, high-performance computing and test correlation are valuable additions.
The required depth depends on the risk and scope of the simulation. A straightforward parameter study may need focused product knowledge, while safety-critical analysis, nonlinear contact, turbulence or coupled physics calls for a specialist who can verify assumptions and defend the results.
Ansys work is often suitable for remote collaboration when CAD files, requirements and computing access are available securely. On-site workshops in Germany can still help with model definition, test correlation and coordination with design or manufacturing teams.
Ansys Workbench provides a project environment for connecting geometry, materials, meshing, solver setup and post-processing across compatible Ansys applications. It improves repeatability and makes parameter studies easier to manage, but it does not replace sound modelling decisions.
A reliable Ansys specialist documents mesh checks, boundary conditions, material sources, convergence and sensitivity to key assumptions. Results should also be compared with analytical estimates, measurements or known physical behaviour rather than judged by visual output alone.
Before using Ansys, a freelancer should clarify the design question, required physics, available CAD and material data, expected deliverables and validation evidence. They should also confirm solver versions, licensing, compute resources, data-security rules and how the results will guide the client’s decision.
The average hourly rate of freelancers in Germany who have used Ansys in their recent projects is 75 €, which corresponds to a daily rate of about 602 € based on an 8-hour working day.
Of the freelancers in Germany who have used Ansys in their recent projects, 96% hold at least a Bachelor's degree, 71% hold at least a Master's degree, and 29% hold a doctorate.
On average, freelancers in Germany who have used Ansys in their recent projects have 15 years of professional experience, with a single engagement typically lasting around 5.6 years.
The most common languages among freelancers in Germany who have used Ansys in their recent projects are German (100%), English (100%), and French (22%).
The most common industries among freelancers in Germany who have used Ansys in their recent projects are Manufacturing (82%), Automotive (50%), and Education (34%).
The most common business areas among freelancers in Germany who have used Ansys in their recent projects are Product Development (90%), Research and Development (80%), and Quality Assurance (64%).
Main locations of FRATCH Experts, who have recently used Ansys
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg 
Munich Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
