Experience
UAV Field Engineer
Helsing
- UAV Field Testing: field testing for Unmanned Aerial Vehicles (UAVs) to ensure operational readiness.
- Quality Assurance (QA) Lead: Served as the Production Shift Lead for drone manufacturing, overseeing hardware and software quality checks and performance analysis.
- GCSO – Ship Landing Project: Acted as the Ground Control Station Operator (GCSO) for specialized maritime ship-landing operations.
- Weaponization Operator: Managed and operated specialized systems for tactical drone weaponization.
Senior UAV Pilot
IMCO (Advanced system and technology)
Total flying hours: 365 hours
- Conducted live line inspections utilizing RGB, IR, and UV technologies.
- Performed 3D mapping of Coast Guard radar towers.
- Executed drone surveys and mapping for islands.
- Managed drone vegetation and conducted inspections for the oil and gas sector.
- Integrated hybrid drones, managed payload integration, and performed troubleshooting and maintenance, including engine maintenance.
UAV Avionic Engineer & UAV Test pilot
Volume Group of Companies
Total flying hours: 106 hours
- Defined system architecture for Small and Long-Range UAVs to meet product requirements.
- Conducted research and development for new sensors, components, and subsystems for UAS products, along with validation.
- Assisted in selecting propulsion systems for Multi copters and Hybrid VTOLs with weights ranging from 20kg to 110kg.
Lidar Team Supervisor & Lead UAV pilot
High Line Division Unmanned Systems
Total flying hours: 3109 hours
- Power Line inspection (400 kV, 300 kV, 132 kV & 33 kV) using (LiDAR survey & Visual Camera RGB, Thermal & UV Camera inspection)
- Team management and Lidar project supervisor
- Pilot Flight types VLOS, EVLOS, BVLOS operations from the Mobile Drone control center (MDCC)
- Hybrid Engine Repair and Maintenance, UAV integration and Maintenance.
Technical Assistant UAV and research engineer
Centre for Aerospace Research MIT Anna University – Dhaksha Unmanned Systems (DUMS)
Total flying hours: 1456 hours
- UAV Integration, Designing, Prototyping, Flight testing, Composite Molding, Li-ion battery packing, Assembling, Navigation, Flight Control, Flight planning, Flight Mechanics, Avionics, Simulation, Flight programming, Verification & Validation.
- UAV Demonstration (Military, Air force, NSG, CRPF, Police, Commando, DGCA, BEL, and BSF), etc. Projects are done on Search and rescue, surveillance, mapping, aerial photo and videos, agriculture, HEALTHCARE DRONE AMBULANCES, surveying, research, data analysis, police drone operation, SWARM DRONE, energy inspection, insurance, mining, roof & solar inspection, and underwater UAVs systems.
Project associate II & Pilot
Jet Aerospace Aviation Research Center
Total flying hours: 21 hours
- Designing and fabrication of UAVs, Teaching college students, and Test flying
- Higher institution projects under UAV development.
Team Leader
- Design and fabrication of CAN SAT used to measure atmospheric parameters with GPS and GSM systems.
- Software used: CATIA V5, AUTO CAD, C++, Mission planner, and MS office.
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Aerospace and Defense, Energy, Utilities, Agriculture, Banking and Finance, and Healthcare.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Operations, Production, Quality Assurance, Product Development, Research and Development, and Project Management.
Frequently asked questions
Have questions? Find more information here.
Jeffrey is based in Munich, Germany.
Jeffrey speaks the following languages: Tamil (Native), English (Advanced).
Jeffrey has at least 9 years of experience. During this time, Jeffrey has worked in at least 7 different roles and for 6 different companies. The average length of individual experience is 1 year and 4 months. Note that Jeffrey may not have shared all experience and actually has more experience.
Based on recent experience, Jeffrey would be well-suited for roles such as: UAV Field Engineer, Senior UAV Pilot, UAV Avionic Engineer & UAV Test pilot.
Jeffrey's most recent position is UAV Field Engineer at Helsing.
In recent years, Jeffrey has worked for Helsing, IMCO (Advanced system and technology), Volume Group of Companies, and High Line Division Unmanned Systems.
Jeffrey is most experienced in industries like Aerospace and Defense, Energy, and Utilities. Jeffrey also has some experience in Agriculture, Banking and Finance, and Healthcare.
Jeffrey is most experienced in business areas like Operations, Production, and Quality Assurance. Jeffrey also has some experience in Product Development, Research and Development, and Project Management.
Jeffrey has recently worked in industries like Energy, Utilities, and Aerospace and Defense.
Jeffrey has recently worked in business areas like Operations, Quality Assurance, and Project Management.
Jeffrey holds a Master in Aeronautical Engineering from Anna University (Excel Engineering College).
Jeffrey has 1 certificate: Certified in Microsoft and wiki techy in ethical hacking.
The availability of Jeffrey needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Robert B.
Last position:
Team Lead; Software Developer at Provider of industrial control systems for manufacturing and digital transformation
Industrial Communication | Proof of Concept: Controller-to-Controller Communication with OPC UA FX
Proof of Concept for OPC UA FX-based controller-to-controller communication between virtual programmable logic controllers (vPLC) on an industrial edge platform. A virtual test environment was set up on Debian Linux in two phases (including VMs and vPLCs), shared-memory communication (real-time information bus) was activated, and the RIB solution was integrated into a customized product firmware (including shared memory and PROFINET support) and deployed in containerized environments (Docker). Additionally, a virtual Ethernet connection was developed to simulate the network topology. Finally, commissioning, functional tests, sample application creation, comprehensive documentation, and customer support were completed.
Thomas T.
Last position:
Head of Product & Software at UZE ADS Europe GmbH
- Further development of a roof-mounted advertising unit for mobile digital advertising, including sensors such as GPS, light sensors, and 2D cameras
- Development of a service tool for commissioning and remote service control
- Development of a marketplace to manage devices, partners, and advertising campaigns
- Communication with the regulatory authority (KBA) as key account manager
- Business model development in data-driven business
- Development and coordination of service processes and workflows
- Building a network of service partners in Germany
- Strategy development, restructuring, and M&A processes
Jens-Uwe P.
Last position:
Architecture and programming for an automotive test bench platform at Automotive supplier
In this project, I was responsible for designing and implementing a new, modular, and highly scalable test bench platform for an automotive supplier. My focus was on developing a robust system architecture and programming the associated software, with UML modeling used consistently throughout. This structured approach significantly increased the reusability of individual LabVIEW test modules and sustainably reduced development time for subsequent projects. I also integrated modern automotive standards such as CAN FD, LIN, and safety requirements, making the solution future-proof.
Technologies: LabVIEW, Visio, UML, CAN FD, LIN, DMM, Safety, Image processing, Project management, HMI, C#, C++, Python, Rust, CI
Volker W.
Last position:
Analyst – Platform Optimization at TradingView ProRealtime
Programming custom indicators with ProBuilder (for the ProRealTime platform)
6 months at RCP - Rabe Academy (basics - trading account - TWS Interactive Brokers) Focus: ETH price history - NVIDIA stock (NASDAQ and CBOE)
- 500 hours total (TradingView & ProRealTime), including approx. 1,500 hours of tick data analysis using ProRealTime
Systematic market analysis, development of custom indicators, pattern recognition.
Andreas A.
Last position:
International ICT Senior Project Manager / Senior Consultant at ING DIBA AG
At ING-DIBA AG, transform all local infrastructure applications into a private cloud environment as part of consolidation. This active architecture environment has high application density and represents the core of the banking business. Based on a DevOps architecture, a uniform and standardized environment will be created in the target design, which is highly scalable and meets the requirements of regulatory authorities and the bank's internal security standards.
Developed the target concept with involved departments.
Defined VPN/DNS naming conventions and network segmentation.
Designed the required load balancer system.
Created a transfer solution for non-routable IP addresses.
Identified application dependencies in the initial design.
Coordinated application owners, data protection, information security, and identity managers.
Developed a validation POC to test and optimize the cloud migration.
Defined development, test, quality, and production environments in the cloud design, considering an agent-based initial architecture.
Used existing CMDB systems and adapted the database structure in the target design.
Established an Office 365 environment for international collaboration for the migration project (classic Office environment including Power BI, SharePoint, Teams)
Felix S.
Last position:
App Developer at XIXUM-Modeler
- Developing a model-based AI where natural language is interpreted as formal relations.
- Natural language terms are not considered rigid but fluid and can be negotiated in a context so meaning resolves by iteratively specifying.
- Develops all kinds of model solutions.
- Backed by natural language and data annotation.
- Requirements to code and other solutions.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a UAV Field Engineer
Nearby freelancers
Professionals working in or nearby Munich, Germany
