Experience
Aerospace Engineering Expert / Technical Problem Writer
Micro1
- Develop advanced aerospace engineering problems designed to expose reasoning failures in frontier large language models (LLMs).
- Create technically rigorous problems in aerodynamics, aircraft systems, hydraulics, pneumatics, thermodynamics, and flight mechanics.
- Analyze LLM failure modes, identify incorrect assumptions and reasoning paths, and refine problems through repeated model testing and technical review.
Aircraft System Design Engineer
TURKISH AEROSPACE (TUSAŞ)
Working for Turkish Fighter (TF-X) project, Hydraulic and pneumatic power systems design and analysis, system architecture design, system performance, and thermal analysis, and system requirements descriptions and a validation test. HPS, PPS and consumer systems (Flight control actuation, landing gears, MWBD)
Flight Test Engineer
TURKISH AEROSPACE (TUSAŞ)
Flight test planning, execution, and flight data analysis. Reviewing system and regulatory requirements, authoring test plans to include test specifications, defining test success criteria, and analysis methods. Intensive training and learning first national training jet program tests include simulator, engine performance, high-speed and low-speed taxi, first flight, and more.
R&D Engineer
Aytok Water Filter Systems
The R&D role is responsible for weekly meetings and production for Netafim TM filters.
Water filter project tracking and improvement on design according to customer needs as well as efficiency and performance improvements
Flight Science Engineer, Engineering Development Program
TURKISH AEROSPACE (TUSAŞ)
Flight Sciences Engineer Aerodynamics &Flight Performance Calculation, Master geometry generation for UAV. SRR, PDR, CDR, report preparation, and presentation. producing high-performance aircraft with 3-D printers (Best performance so far between other teams. Examples of tasks: airfoil selection, take-off and landing distance calculation)
Menthor
Turkish Aerospace
Aircraft System Design Engineer (February 2023-Present) Working for Turkish Fighter (TF-X) project, Hydraulic and pneumatic power systems design and analysis, system architecture design, system performance, and thermal analysis, and system requirements descriptions and a validation test. HPS, PPS and consumer systems (Flight control actuation, landing gears, MWBD)
Flight Test Engineer (October 2021- February2023) Flight test planning, execution, and flight data analysis. Reviewing system and regulatory requirements, authoring test plans to include test specifications, defining test success criteria, and analysis methods. Intensive training and learning first national training jet program tests include simulator, engine performance, high-speed and low-speed taxi, first flight, and more.
Flight Science Engineer, Engineering Development Program May 2021- October 2021 Flight Sciences Engineer Aerodynamics &Flight Performance Calculation, Master geometry generation for UAV. SRR, PDR, CDR, report preparation, and presentation. producing high-performance aircraft with 3-D printers (Best performance so far between other teams. Examples of tasks: airfoil selection, take-off and landing distance calculation)
Performance and analysis engineer
HELPFUL ENGINEERING
- Volunteer work, working on an open-source drone project
Aeronautical engineering trainee
AIRCARCORP
A start-up company working on an autonomous all-electric human-carrying flying car, making a prototype
- internship in a company that working on a unique flying car design, Assisted the building prototype and observation of the processes,1 month
Engineering trainee
F3 DESIGN STUDIO
An architectural design office also works on different projects
Long-term Erasmus internship: Working on a patented wallet project, making research, industrial drawings, assisting the tasks
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Aerospace and Defense, Construction, and Fashion.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Research and Development, Product Development, and Quality Assurance.
Frequently asked questions
Have questions? Find more information here.
Abdulkadir speaks the following languages: Turkish (Native), English (Advanced), Italian (Elementary).
Abdulkadir has at least 7 years of experience. During this time, Abdulkadir has worked in at least 9 different roles and for 7 different companies. The average length of individual experience is 1 year and 9 months. Note that Abdulkadir may not have shared all experience and actually has more experience.
Based on recent experience, Abdulkadir would be well-suited for roles such as: Aerospace Engineering Expert / Technical Problem Writer, Aircraft System Design Engineer, Flight Test Engineer.
Abdulkadir's most recent position is Aerospace Engineering Expert / Technical Problem Writer at Micro1.
In recent years, Abdulkadir has worked for Micro1, TURKISH AEROSPACE (TUSAŞ), and Turkish Aerospace.
Abdulkadir is most experienced in industries like Aerospace and Defense, Construction, and Fashion. Abdulkadir also has some experience in Manufacturing and Automotive.
Abdulkadir is most experienced in business areas like Research and Development, Product Development, and Quality Assurance. Abdulkadir also has some experience in Production.
Abdulkadir has recently worked in industries like Aerospace and Defense.
Abdulkadir has recently worked in business areas like Research and Development, Product Development, and Quality Assurance.
Abdulkadir holds a Master in Energy Science and Technology from Istanbul Technical University and a Bachelor in Aeronautical Engineering from Necmettin Erbakan University.
Abdulkadir has 11 certificates. Among them, these include: AUTOCAD Certificate for 192 Hours Course, Advanced Excel Certificate, and Category 3/ 4 Flight Test Engineering Training.
Abdulkadir is immediately available full-time for suitable projects.
Similar freelancers
Discover other experts with similar qualifications and experience
Nazif K.
Last position:
Self Employed at Self Employed
Providing services to cover the complete electronic product design process.
- Requirement validation
- Creating / re-writing / breaking down requirements
- Requirement analysis and functional partitioning
- Component selection and risk assessment
- Component library management
- Schematics design
- Safety and reliability assessment
- HDI PCB design
- Design review against requirements
- Readiness for manufacturing review
- Readiness for testing review
- Readiness for verification review
High Power Density BLDC Driver Module with MCU as controller:
- PCB module with heatsink
- L47mm x W36mm x H19mm compact sizes
- Nominal input voltage: 48V
- Sinusoidal continuous RMS current: 50A
- STO, Digital input and outputs
- Analog signal inputs
- CANBUS interface
- RS232/RS485 interface
- Multilayer FR4 design (No aluminum PCB)
Integrated Mission Computer & Smart 5kW PDU
- Featuring 3 different current limits, in total 63 power outputs
- Featuring programmable current amplitude and on-time, in total 84 CC power outputs.
- Ethernet, CANBUS, MIL-BUS, RS485 communication interfaces
- In total 120 Open-Short, Open-GND, 28V-GND types discrete I/O interfaces
- BIT and CIT solutions to monitor output voltage, current and board temperature
Rüdiger S.
Last position:
Manufacturer of busbar systems for power and data transmission
- Review and assessment of the existing situation
- Identification and definition of implementation measures to close existing gaps
Hamdi D.
Last position:
E-Mobility Project Manager at DELTA ENERGY SYSTEMS (GERMANY) GmbH
- Analyze subject-specific requirements, taking the project objectives into account (using Doors as a tool)
- Derive work packages and define milestones based on the previous requirements analysis
- Create and continuously update the project plan using MS Project
- Coordinate with departments and series production industrialization
- Review and track milestones and work packages (MS Project, JIRA confluence)
- Prepare monthly presentations for management on the project, project planning, status, and outlook
- Coordinate prototype builds and tests as part of Design Verification
- Document all project activities, including all required forecasts, analyses, recommendations, and plans (A-Spice compliant)
- Coordinate with sites in China and Thailand
Abdullah A.
Last position:
Freelance Automation Engineer at Freelancer
- Automation & Scada system upgrade and retrofit S5 to S7 and TIA & WinCC Prof & HMI
- Consulting remote and on-site service for automation systems, Scada & HMI
- EMSR, electrical, automation and Scada system design
- MCC, PLC and drive panel design and manufacturing
- Software and network management; PLC S7, TIA, WinCC, Danfoss, SEW, Sinamics drive software and hardware development, engineering and commissioning
- Management of inquiries, quotations, ordering and project follow-up to commissioning
Okan A.
Last position:
Team Leader / Project Manager at OEM in the Stuttgart area
- development, setup and deployment of a custom HIL system for aerodynamic components
- adaptation of the system specification and creation of the test specification
- coordination and planning of test cases, as well as specification of component and K-HIL tests at the system level and in integration
- planning, specification and execution of interface tests
- participation in vehicle trials
- led a team of 10 members following classic and agile A-SPICE standards with development according to the V-model
- Tools used: Jira, MS Project, GitTea, Gox, Confluence, KPM, MoveIT, DOORS, PTC Integrity, Intense, JFrog
Muhammad Tanveer B.
Last position:
Embedded Systems Consultant / Architect | Integration and Validation Engineer / Manager at Ingenieurbüro Baig
Led the hardware development and validation of a safety-critical 400-V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in compliance with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-country EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.
Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) rework, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.
End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field-of-view limits, and thermal and voltage-related ECU state machines. Skilled use of a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.
Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.
Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.
Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurements. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.
Successfully delivered full engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept to system integration and validation, technical documentation, supplier coordination, and user training.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a Aerospace Engineering Expert / Technical Problem Writer

