Experience
Senior STEM Expert Writer & Reviewer | AI Training & Evaluation
Freelancer
STEM technical writing, AI evaluation and quality assurance
- Delivered a substantial portfolio of expert-authored STEM assignments and technical reviews across materials science, mechanical/aerospace engineering, computational mechanics and mathematics.
- Authored advanced engineering problems, technical prompts and reference solutions; reviewed AI outputs for scientific accuracy, physical consistency, mathematical reasoning and instruction compliance.
- Applied rubric-based LLM scoring, pairwise preference ranking, error taxonomies and specialist data labelling; provided actionable scientific review feedback to improve model-response and dataset quality.
- Reviewed materials-science content on mechanical behaviour, material properties and thermal response.
- Verified equations, units, boundary conditions and underlying modelling assumptions.
- Identified numerical, conceptual and methodological errors in specialist technical submissions.
- Documented criterion-linked review decisions and corrections to support consistent technical quality.
Research Intern
AEE INTEC – Institute for Sustainable Technologies
- Developed and integrated physics-based solar-thermal models in the open-source SunPeek D-CAT framework, covering collector-field dynamics, 1D pipe heat loss and lumped 0D heat exchangers.
- Implemented coupled, ODE-based forward simulations linking collector fields, piping and heat exchangers to support plant-level dynamic analysis.
- Tested and validated model implementations against operational data; combined sensor mapping, automated tests and diagnostic plots for plant-yield assessment.
Scientific Computing Algorithms and Software Developer
Freelance
Engineering simulation and numerical modelling for industrial clients
- Developed FEA/CFD models for multiscale, coupled-physics analysis of additive manufacturing in mechanical and electronic systems.
- Implemented multi-objective parametric optimization algorithms to support efficient simulation and design-space exploration.
- Integrated numerical models and C++ algorithms into industrial simulation codebases for engineering analysis.
Industrial Research Collaborator – PNRR PhD Project
EPS Italia Srl Società Benefit / SISSA
Six months total, intermittent periods within the SISSA–EPS Italia PhD collaboration.
- Developed physics-based FEM/ROM workflows for orthotropic modular event-flooring systems, supporting parametric structural, thermomechanical and transient-response assessment under NextGenerationEU–PNRR.
Research Trainee
Institute of Fluid Dynamics and Technical Acoustics, Technical University of Berlin
Research group: Data Analysis and Modeling of Turbulent Flows.
- Built GeoCreate CAD models and CENTAUR meshes; assessed mesh convergence for compressible CFD.
- Simulated steady and acoustically excited duct/pipe flows with AVBP, broadband forcing and characteristic boundary treatments.
- Identified 2-by-2 acoustic scattering and transfer matrices using MATLAB-based CFD/system identification, enabling low-order acoustic network models.
- Verified acoustic predictions against analytical and axisymmetric numerical references; extracted, post-processed and analysed simulation data and reported findings.
Project Intern and CAE/CFD Trainee
Techzilon Training Solutions
- Completed CFD and finite element analysis (FEA) training; performed car-door-trim sub-assembly modal analysis, from FE modelling to technical reporting.
- Prepared and cleaned CATIA V5 geometry; generated HyperMesh/ANSYS meshes and assessed grid convergence.
- Performed structural FEA with OptiStruct, RADIOSS and ANSYS Mechanical, and airfoil CFD with ANSYS CFX and Fluent.
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Manufacturing, Aerospace and Defense, Information Technology, Energy, Education, and Automotive.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Research and Development, Information Technology, Quality Assurance, Product Development, Business Intelligence, and Project Management.
Frequently asked questions
Have questions? Find more information here.
Anantha Krishnan is based in Province of Trieste, Italy and can operate in on-site, hybrid, and remote work models.
Anantha Krishnan speaks the following languages: Hindi (Native), Malayalam (Native), English (Advanced), Italian (Elementary).
Anantha Krishnan has at least 5 years of experience. During this time, Anantha Krishnan has worked in at least 6 different roles and for 6 different companies. The average length of individual experience is 1 year and 10 months. Note that Anantha Krishnan may not have shared all experience and actually has more experience.
Based on recent experience, Anantha Krishnan would be well-suited for roles such as: Senior STEM Expert Writer & Reviewer | AI Training & Evaluation, Research Intern, Scientific Computing Algorithms and Software Developer.
Anantha Krishnan's most recent position is Senior STEM Expert Writer & Reviewer | AI Training & Evaluation at Freelancer.
In recent years, Anantha Krishnan has worked for Freelancer, AEE INTEC – Institute for Sustainable Technologies, Freelance, EPS Italia Srl Società Benefit / SISSA, Institute of Fluid Dynamics and Technical Acoustics, and Technical University of Berlin.
Anantha Krishnan is most experienced in industries like Manufacturing, Aerospace and Defense, and Information Technology. Anantha Krishnan also has some experience in Energy, Education, and Automotive.
Anantha Krishnan is most experienced in business areas like Research and Development, Information Technology, and Product Development. Anantha Krishnan also has some experience in Quality Assurance, Business Intelligence, and Project Management.
Anantha Krishnan holds a Doctorate in Mathematical Analysis, Modelling, and Applications from Scuola Internazionale Superiore di Studi Avanzati (SISSA), a Master in Space and Astronautical Engineering from Sapienza University of Rome and a Bachelor in Aerospace Engineering from SRM Institute of Science and Technology.
Anantha Krishnan has 7 certificates. Among them, these include: Master Diploma in Computational Fluid Dynamics (CFD), Master Diploma in Computer Aided Engineering (CAE), and Industrial Training: gas-turbine components.
Anantha Krishnan is immediately available full-time for suitable projects.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Vaikunth S.
Last position:
Technology Consultant – Hydrogen Systems Engineering at Bashpa Energy Technology Solutions
- Consulting & strategic advisory in areas related systems engineering, infrastructure development, techno-economic feasibility, sector coupling and regulatory aspects of green hydrogen in India to evaluate integration and decarbonization opportunities.
- Developed data-driven models of renewable distributed energy resources (wind, solar and hydel) to evaluate the cost of green hydrogen production, distribution and application, aiming for commercial viability and affordability.
- Spearheaded the modelling of the Indian electricity grid and simulation of load balancing to estimate the short- and long-term energy market flexibility analysis to support energy trading and risk management for hydrogen assets.
- Leading AI-enabled software development to support decision-making and accelerate the adoption of a hydrogen economy in India.
Noushiq M.
Last position:
Projects at Institute for Intelligent Systems
- Evaluated and analyzed camera-based traffic light and sign recognition systems across various LLM-based autonomous driving systems (LMDrive, BEVDriver)
- Implemented a VLM-based traffic notice instruction generation unit for a closed-loop autonomous driving system that alerts the driver to unexpected driving incidents
- Developed an independent LLM-based local chatbot using Llama, DeepSeek, and Qwen, including an MLflow evaluation framework
Ursula M.
Last position:
Business Mentor at RoleModel Rebels
- Mentor female students and professionals in advancing their careers, particularly as aspiring tech entrepreneurs.
Raghu Ram V.
Last position:
Telco Customer Churn Prediction – End-to-End ML Pipeline at Self-Initiated Project
- Designed and implemented a full machine learning pipeline for churn prediction using the Telco dataset.
- Applied preprocessing techniques including missing value handling, categorical encoding, feature scaling, and PCA.
- Built and compared over 15 models (logistic regression, random forest, XGBoost, etc.) and evaluated them using accuracy, precision, recall, F1 score, ROC AUC, and PR AUC.
- Tuned hyperparameters with GridSearchCV, achieving 80.6% accuracy with random forest and XGBoost.
- Created visual reports (bar plots, heatmaps, radar charts) to interpret model performance and churn drivers.
- Exported reusable pipelines and trained models with joblib for deployment.
Ossama D.
Last position:
FE Simulation and Design at Self-employed
- Design and development of charging inlets for megawatt charging systems
- Development of strategies for applying AI in mechanical engineering
- Concept development of inductive charging systems for autonomous vehicles in industrial environments
- Creating concepts for electronically controlled safety brakes for elevators
- Development of power generators with and without iron cores (output below 1 kV)
- Development of solutions for marking plastic and stainless steel components
- Development of various brackets in compliance with EHEDG guidelines
- Requirement management using JAMA
- Simulation of the strength behavior of wastewater treatment plants
- FE optimization simulation of equipment behavior under vibration loads using ANSYS
- Maintenance of bills of materials and databases
- Development of various opto-mechanical systems
- Distance measurement and safety light curtains
- Rapid prototyping methods like 3D printing, SLS, liquid silicone, STL
- Development of modules and connection techniques for integrating power supply and data management units onto PCBs
- Development of shielding elements for industrial equipment
- Implementation of design solutions for connecting PCBs with plugs or cables
- Development of busbars to meet ESD requirements
- Development of fasteners made of V4A steels with clinching, crimping, and/or riveting options for hygienic requirements
- Development of 2K injection molded parts and compressed elastomers
- Development of cable glands made of V4A stainless steel for hygienic requirements
- Development of devices with optical and electronic modules
- Conducting qualification tests (temperature cycling, leak tightness, climate tests, etc.)
- Conducting process and design FMEA
- Development according to agile processes
- Material-appropriate design for chemical resistance (cleaning and disinfecting agents)
- Optimization of injection molded parts for ultrasonic and laser welding
- Investigation of the influence of marking methods (laser marking, electrolytic marking) on part resistance to chemicals
- Corrosion assessment and investigation of stainless steel parts
- Design of parts for machining from welded semifinished products (V4A stainless steels)
- Development of parts made of metallic materials for wireless power transfer devices (CAD: Creo Parametric)
- Creating drawings and models for clients
- FE analysis of the behavior of elastomer seals including installation (CAE: ANSYS)
- Design and development of glass-to-V4A stainless steel connections according to EHEDG guidelines
- Implementation of design solutions for joining similar and dissimilar materials (adhesive bonding, welding, snap hooks) using CAD: Creo Direct Modeling and SolidWorks
- Equipment design for the pharmaceutical and food industries using FDA-approved materials and according to EHEDG guidelines (CAD: Creo Direct Modeling, SolidWorks)
- FE analysis of the effect of temperature on plastic assemblies (CAE: ANSYS)
- Further development of a tool for FE calculation of additive manufacturing (laser sintering process) (CAE: CalculiX)
- Consulting and services in the field of CAD & CAE engineering
- Further development of FE systems for analyzing component strength and topology optimization
- Further development and implementation of an indicator lamp from electrical, optical and mechanical components for integration into a safety module (CAD: Creo Direct Modeling)
- FE simulation to investigate assembly tightness and optimize seals (CAE: ANSYS)
Nikola V.
Last position:
Director/Co-founder at thermIT consulting
- providing expertise in thermal analysis and thermal management in aerospace, EV automotive, energy, biomedical and biotech
- cooling system design
- energy storage design
- cryo-preservation solutions
- thermal analysis
- notable clients (Lilium, X-therma, AIB)
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a Senior STEM Expert Writer & Reviewer | AI Training & Evaluation
Nearby freelancers
Professionals working in or nearby Province of Trieste, Italy

