Ethernet Experts in Germany

• Focus on optimizing and further developing the internal customer EBICS application
• Functional and technical consulting for Aareal First Financial Solutions AG on EBICS standard products and applications in the areas of operations and further development, as well as project-related communication with external development partners and the product manufacturer to implement the corresponding technical optimizations
• As the functional coordinator, providing advice on content-related and regulatory requirements as well as technical prerequisites and requirements, and bringing these together at the functional level
• Consulting on the use of EBICS formats
• Reviewing the current EBICS standard for optimization and further development potential
• Analyzing the current state to identify development potential and deriving appropriate recommendations for action while considering regulatory requirements
• Conducting EBICS tests throughout the project
• Functional responsibility for requirements management and, in this context, recording and documenting requirements for such tests
• Designing a functional and sustainable test management system
• Conducting and evaluating tests
• Consulting on sustainable quality assurance and audits
• Project language: German and English
• Tools/Methods: MS Project, MS Office, MS Visio, TestRail, Confluence, Jira, Business Logics Bankkrecher, Business Logics Test Data Generator, Business Logics Banking Tool, Business Logics Test System, DBEAVER, Squirrel, Unix Virtual Machines, WinSCP, Kitty, Putty, various Aareal Bank products, Online Banking Portal, Aareal Sign, core banking system, SAP Blue Eagle, SAP RE-FX, Aareon Wodis Sigma, Haufe Real Estate Wowinex, GAP Group Immotion, UTS Karthago, SAP IS-U/Waste, SIV kVASy, various EBICS clients

• Technical leadership across hardware, firmware, and software teams; scope: hardware/firmware team (4 people) and leadership group (5 people)
• Consolidated and documented a product family that had grown over more than 15 years and aligned it with CRA compliance — from the bare-metal I/O module to the cloud interface.
• Provided the most important customer product with the essential requirements and architecture documentation within two months — for a firmware landscape that had grown over more than 15 years. It now supports the customer’s modernization strategy.
• Established a monthly reporting line to the supervisory board and executive board within three months: nine meetings since 12/2025. The report itself is versioned and built from the CI pipeline; it is based on automatically collected activity and release data instead of assessments.
• Built a container-based CI/CD infrastructure from scratch: cross-compilation, host tests, and documentation builds in one continuous pipeline.
• Introduced declarative QA gates for DevOps and development artifacts — from the start using lefthook instead of pre-commit, executed in a dedicated container image.

Technologies used: arc42, req42, tpo42, docToolchain, PlantUML, ArchiMate, C4 model, ADR, C, C++ (GTest), CMake, Bare Metal (ARM Cortex-M3/M7), OCI containers, Jenkins, lefthook, Prometheus, Grafana, SBOM, CRA, OPC, SCADA, PLC integration, IPv6 migration, Zero Trust, Sociocracy 3.0, Cynefin

• Development of a comprehensive transformation model for IT departments and ITSM organizations, from operational stabilization through structuring and optimization to strategic advancement
• Design of a transformation matrix that connects development phases with the implementation activities Position, Focus, Model, Enable, Anchor and Develop
• Development of assessment, maturity and decision-making logic to determine the operational starting point, the appropriate entry point and the prioritized areas of action
• Structuring of an end-to-end approach from current-state assessment and target vision through operating model, roadmap and service modules to implementation and integration into steady-state operations
• Derivation of combinable consulting and implementation modules, including methods, deliverables, role models, governance structures and transformation paths
• Collection, structuring and prioritization of business requirements from the perspectives of IT management, service management and operational roles
• Translation of requirements into target visions, process and role models, decision criteria and traceable deliverables

Environment / Tools: ITIL 4, IT4IT, Operating Model Canvas, SIAM, maturity models Kanban

• Gathering information
• Creating rollout wave concepts
• Coordinating employees
• Monitoring and managing activities
• Project management including analysis and reporting to the board
• Creating instructions and specifications
• Training floorwalkers
• Supporting the rollout on site
• VIP support
• Introducing SharePoint

• Analysis of the existing CAN communication between microcontrollers
• Analysis of the sensors used and the measured values collected
• Planning the CAN messages for transmitting the measured values
• Iterative adjustment of the microcontroller code to the new CAN messages
• Cross-compilation from x64 to arm64

Project goal: Carrying out system tests and validating industrial communication and control systems, including requirements definition and verification.

Responsibilities:

• Test planning, test execution
• Test strategy, test cases, and test specifications
• Requirements analysis
• Ensuring traceability between requirements, test cases, and defects
• Carrying out regression and integration tests
• Defect analysis
• Simulation and validation
• NetSniffer Wireshark
• Supporting test automation (Python, CI/CD)
• Reporting
• Stakeholder coordination and agile collaboration (Scrum / SAFe / Kanban)
• V-Model
• CI/CD automation with Python, Groovy, and frameworks (Selenium, PyTest)

Technologies:: CAN, Modbus, Ethernet, PLC, PROFINET, Codebeamer ALM, Scrum, SAFe, MS Teams, Git, CI/CD with GitLab CI and TeamCity, Windows Batch, FAS, Wireshark, Python, Enterprise Architect (EA), AI tools (e.g. ChatGPT, Microsoft Copilot), VS Code, Tia Portal, SCL, Python (Selenium, PyTest)

• Team leadership: Prioritization and coordination of four cross-functional teams.
• Platform strategy: Development and implementation of strategies to optimize existing IT platforms.
• Stakeholder management: Active management of expectations and communication with internal and external stakeholders.
• Program and innovation management: Prioritization and coordination of cross-department projects as well as innovation initiatives.
• Product Owner consulting: Advising Product Owners with a focus on product development and continuous product improvement.
• Organizational development: Improving communication and decision-making structures across all organizational levels.
• Change management: Implementing best-practice change management methods to ensure continuous optimization and innovation.
• Quality assurance: Ensuring high quality standards in processes, services, and deliverables.

Providing services to cover the complete electronic product design process.

• Requirement validation
• Creating / re-writing / breaking down requirements
• Requirement analysis and functional partitioning
• Component selection and risk assessment
• Component library management
• Schematics design
• Safety and reliability assessment
• HDI PCB design
• Design review against requirements
• Readiness for manufacturing review
• Readiness for testing review
• Readiness for verification review

High Power Density BLDC Driver Module with MCU as controller:

• PCB module with heatsink
• L47mm x W36mm x H19mm compact sizes
• Nominal input voltage: 48V
• Sinusoidal continuous RMS current: 50A
• STO, Digital input and outputs
• Analog signal inputs
• CANBUS interface
• RS232/RS485 interface
• Multilayer FR4 design (No aluminum PCB)

Integrated Mission Computer & Smart 5kW PDU

• Featuring 3 different current limits, in total 63 power outputs
• Featuring programmable current amplitude and on-time, in total 84 CC power outputs.
• Ethernet, CANBUS, MIL-BUS, RS485 communication interfaces
• In total 120 Open-Short, Open-GND, 28V-GND types discrete I/O interfaces
• BIT and CIT solutions to monitor output voltage, current and board temperature

• Built and configured a highly parameterized UVM environment to validate AMBA APB subsystem.
• Developed virtual sequencers to drive synchronized, parallel master-slave sequences ensuring accurate peripheral address decoding and protocol handshake.
• Methodologies: UVM, Constrained Random Verification
• Tools: Cadence Xcelium, SimVision

In this project, I was responsible for designing and implementing a new, modular, and highly scalable test bench platform for an automotive supplier. My focus was on developing a robust system architecture and programming the associated software, with UML modeling used consistently throughout. This structured approach significantly increased the reusability of individual LabVIEW test modules and sustainably reduced development time for subsequent projects. I also integrated modern automotive standards such as CAN FD, LIN, and safety requirements, making the solution future-proof.

Technologies: LabVIEW, Visio, UML, CAN FD, LIN, DMM, Safety, Image processing, Project management, HMI, C#, C++, Python, Rust, CI

Temporary employment

• System black-box integration tests (BBIT, IVVQ): Execution of regression, release, acceptance, and compliance tests for safety-critical brake control units in the rail industry
• Software test application & integration: Runtime configuration of software components and libraries, validation of interfaces, configuration dependencies, and component interactions
• Test automation (FEAT framework): Co-development and further development of an automated test framework for test execution, reporting, and result analysis
• Functional safety (SiL4, FuSi): Ensuring compliance with safety requirements, traceability and coverage, as well as standards compliance according to EN50126/28/29
• Test automation for communication components: Configuration and validation of fieldbus (CAN) and Ethernet-based TCMS data communication interfaces (TRDP and CIP)
• Requirements analysis & shift-left (PTC Windchill ALM): Analysis of software and system artifacts to identify gaps, ambiguities, and redundancies early in the SDLC
• Test design & test case development: Derivation of test conditions, coverage strategies, and implementation of data-driven test cases (DDT), including reusable test data fixtures
• CI/CD & automation (Python, PowerShell, Jenkins, SVN): Automation of build, test, and HIL deployment processes as well as integration into CI/CD pipelines
• Test data & configuration management (XML): Maintenance and adaptation of XML test vectors and system configurations with automated integration into test environments
• Non-functional testing: Execution of performance and load tests to assess stability and system behavior
• Agile development & defect management (JIRA, Confluence): Participation in Scrum teams, test coordination, review of test artifacts, as well as defect tracking and root-cause analysis
• Error analysis & debugging (CANoe, CANalyzer): Analysis of errors and message flows across multiple system layers (application to bus)
• Model-based analysis (UML, Enterprise Architect): Specification of SUT/SOW and support for systematic test control
• Process & test documentation: Creation of integration and test documentation according to internal quality and certification requirements

• Error analysis and fixes including performance optimization of the in-house developed platform API
• Change and incident management in day-to-day operations
• Responsible for compliance with security and compliance requirements
• Vendor management for software development and maintenance
• Planning and execution of migration of legacy services to a cloud native platform

Role in the project: project staff, implementation team

Used skills: requirements analysis, IT service and application management, IT operations, error analysis and performance optimization, software maintenance and lifecycle management

Project environment: Cloud Native Platform (Kubernetes, Crossplane, AWS, ArgoCD, Grafana)

• Consulting and development of suitable communication concepts between S7-300 and S7-1500, taking the existing PROFIBUS infrastructure into account
• Technical support for connecting the S7-300 controllers to the existing recipe data block of the S7-1500
• Assisting in the development of the communication sequence for recipe access (read, write, acknowledge, status handling)
• Configuration of S7 communication (PUT/GET)
• Creation and adaptation of WinCC V7 scripts (C scripts and VBS scripts) for WinCC-based recipe management
• Development, optimization, and integration of recipe processes into the existing WinCC project structure
• Commissioning of the new communication interfaces and recommissioning of the recipe logic on existing systems
• Creation of technical documents: communication sequences, functional descriptions, commissioning documentation

• Lead functional safety strategy and ISO 26262 compliance across the full lifecycle for a high-voltage electronic switching device that safely connects/disconnects the HV battery in EVs, enabling fast fault isolation and high-current interruption.
• Own the Functional Safety Management Plan (FSMP) and Development Interface Agreement (DIA), acting as the primary safety governance authority across program stakeholders.
• Architect system safety concepts — developing FSC, TSC, and system safety architecture — and define the safety manual with complete user instructions.
• Direct verification and confirmation reviews per ISO 26262 independence requirements.
• Lead safety analysis activities (FTA, FMEA, FMEDA, DFA) and chair vehicle/system integration reviews across cross-functional engineering teams.
• Define methods, templates, and processes that establish best-in-class FuSa practices organization-wide.
• Conduct SEooC assessments and audits, representing the safety organization to internal leadership and external stakeholders.