Oscilloscope Experts in Germany
matched in minutes from over 15,000 CVs with the power of AIHire experts who use oscilloscopes, digital storage scopes, and mixed-signal scopes to debug signals, verify designs, and validate test setups. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used Oscilloscope
Muhammad Tanveer Baig
Last position:
Embedded Systems Consultant / Architect | Integration and Validation Engineer / Manager at Ingenieurbüro Baig
Led the hardware development and validation of a safety-critical 400 V battery management system (BMS) for the TOGG SUV program; performed system architecture reviews, schematic validations, EMC and reliability tests, and root cause analyses in line with relevant automotive standards (ECE-R10, CISPR25, ISO-26262). Coordinated cross-border EU engineering teams, customer reviews, and technical documentation to deliver a production-ready, validated system.
Architected and integrated 22 state-of-the-art ADAS validation vehicles for BMW ADCAM and LIDAR programs at Magna Electronics; synchronized up to 26 heterogeneous sensors (LIDAR, RADAR, cameras, GNSS/INS) using PTP-based timing architectures. Defined the system architecture, HW/SW interfaces for hardware-in-the-loop (HIL) reprocessing, sensor integration strategies, and data acquisition frameworks. This enabled scalable vehicle-level validation, improved validation efficiency by 25%, and reduced project costs by €1.45 million.
End-to-end validation and integration of automotive radar platforms for a Daimler project at Continental. Developed automated open-loop hardware-in-the-loop (HIL) environments to accurately test target tracking KPIs, field of view limits, and thermal and voltage-related ECU state machines. Used a highly complex toolchain consisting of CANoe, Lauterbach Trace32, RADAR target simulators, and EMC shielding chambers for RF and system validation. Synchronized global, interdisciplinary teams to speed up troubleshooting and close critical technical gaps.
Reconstructed and validated the product architecture of an electromechanical e-bike by integrating and troubleshooting critical subsystems (BMS, motor control, sensors, HMI, electronic locking systems). Built a comprehensive system-level test bench for functional testing, fault reproduction, and performance analysis; coordinated suppliers and implemented corrective actions to improve reliability and traceability.
Defined the system architecture and validation strategy for a LIDAR platform developed in cooperation with Elmos Semiconductor; evaluated optical measurement concepts, SPAD detector integration, and system requirements, and created technical recommendations for product development and verification.
Developed LabVIEW-based automation and verification software for a high-precision hydraulic and electromechanical test system for FTE Automotive; integrated NI DAQ hardware for high-frequency real-time capture of physical measurement data. Developed automated test sequences, programmable endurance tests, troubleshooting routines, data logging, and analysis tools to improve test efficiency and traceability.
Successfully managed complete engineering life cycles for well-known industrial customers (Magna, Continental, Farasis, FTE Automotive, BMW, Daimler, TOGG) – from requirements engineering and proof of concept through system integration and validation to technical documentation, supplier coordination, and user training.
Sunish Bharathan
Last position:
AtlasMind - Production AI assistant for Jira at Mercedes Benz Innovation Labs Gmbh
- Converts natural language into JQL using RAG and pgvector. Returns structured JSON with a query, chart spec, and plain-text answer. A two-stage router answers general questions without touching the JQL pipeline at all.
- Interchangeable LLM backends: Ollama, vLLM, Groq, Anthropic Claude, AWS Bedrock - switchable at runtime, no code changes. Self-healing JQL: on Jira validation failure, feeds error back to LLM, retries up to 4 times. OCI Vault for secrets. Deployed on Oracle Cloud A1 with GPU inference over Tailscale private network. Open source.
Chetan Sheshikumar
Last position:
Student Research Assistant at Hochschule Ravensburg-Weingarten (RWU)
- Built and verified Zynq-7000 (Zybo Z7-10) FPGA prototypes in Xilinx Vivado – AXI IP integration, bitstream generation, hardware bring-up, timing-closure checks and waveform-based debug to confirm expected RTL behaviour.
- Set up Cadence Virtuoso schematic/simulation flows and documented settings, results and methodology for reproducible experiments – supporting structured verification and research documentation.
- Wrote Python automation for log parsing, structured data reporting and result analysis; worked daily in version-controlled Linux/Git workflows.
Abdelrahman Hewala
Last position:
Research Assistant (WHK), FPGA Development – BrassSense Project at HAW Hamburg / Prof. Peter Schulz
- Real-time tone detection on FPGA (~20 ms latency target) using a filter bank architecture with a fuzzy-logic decision stage, avoiding FFT due to its window-length/frequency-resolution tradeoff.
- Responsible for system integration and architecture.
Oliver Ohly
Last position:
Embedded Software Architect at Automotive supplier
Stellar SR6 G7 line, 32-bit Arm® Cortex®-R52+ MCU.
- MISRA-C, C99, Greenhills ARM compiler
- Dassault AUTOSAR Builder
- EB Tresos
- Sparx Enterprise Architect 16.1
- VS Code
- Python xml, lxml, NumPy and Pandas
ISO 26262, ISO 21434, hypervisor, key management, HSM. Tooling & automation. LieberLieber LemonTree + Sparx EA. Jira, Confluence, SharePoint. Git/Github. DevOps through Jenkins & Conan.
Valentin Reuter
Last position:
Freelance Hardware Development Engineer at Swarm Biotactics
PCB design with Altium, MCU Programming, Prototyping
Thomas Langer
Last position:
Consultant for AI-driven process automation at Lumiz
AI-driven automation of purchasing on a printing company's website, including selecting delivery times, order options, ordering, payment, and uploading print data from the Lumiz Cloud.
Martin Schaefer
Last position:
MS Fabric Certification
MS Fabric certification with creation of pipelines and notebooks in Fabric using data from Azure, Azure Repos, Azure Boards, and GitHub. Data ingestion via OneLake Explorer, direct IP connection, and API (REST) are the main topics
Youssef Ahmed Rawy Baghdady
Last position:
Test Automation Engineer at IAV GmbH
- Executed standard/complex test cases using ECU-test and Python, improving test throughput by 30%.
- Performed validation and execution of ECU test cases on HiL benches for ADAS to ensure functional quality before release.
- Worked closely with customers to align test activities with project requirements and provide regular validation updates.
- Coordinated with subcontractors to track defects, ensure timely issue resolution, and maintain test quality.
- Ensured testbench stability and maintenance before executing test plans, identifying and resolving issues proactively.
- Developed Python-based automation scripts for reporting and workflow automation.
- Managed test issues and documentation via Jira in coordination with QA and development teams.
- Used CANPE for measuring signals of CAN, FlexRay, Ethernet, and IP using Vector CAN tools.
Meenakumar Vaikundam
Last position:
Senior Embedded Technical Manager at IIT Madras Pravartak Technologies
- Led 14 member dev team and delivered postgresql database integration and performance optimization
- Delivered 8 K lines of C code with fewer defects (5 medium to low) in 8 months of development
- Integrate open source pgVector for AI application of the database for exact and nearest neighbor search
Alban Tchuinkou
Last position:
C/C++ Developer on AIX Systems for SAP Kernel System Integration at IBM Research and Development
- AIX/Linux system administrator: deployment of LPARs (Logical Partitions) for SAP Kernel Development
- C/C++ SAP kernel development and integration to SAP HANA Database
- C/C++ programming and software integration, support for SAP kernel on AIX system; development and testing on SAP VDI
- Example: development of the ABEC Tool (AIX Build Environment Checker) to create SAP build environments for debugging process and benchmarking
- Benchmarking and test execution of SAP kernels (test from the communication to the SAP HANA Database and to SAP NetWeaver) on AIX
- Automate the SAP kernel build via Jenkins and benchmarking over crontab jobs
- New C/C++ compiler design and testing (based on Clang++ and LLVM)
- Customer ticket handling to resolve SAP kernel bugs and build failures
- SAP kernel development with Rust programming language, migrating some sub-kernel projects from C/C++ to Rust because of Rust's memory safety model, ownership system, and concurrency features
- Refactoring selected components in Rust and integrating them with existing C++ codebase via FFI
Anuja Chandran
Last position:
Embedded Software Engineer at Digital Core Technology
- Designed and implemented embedded firmware in C/C++ for ARM-based microcontrollers and SoCs (STM32, NXP, Infineon)
- Worked across bare-metal, FreeRTOS, and Embedded Linux environments, contributing to BSP-level functionality, driver bring-up, and system integration
- Built, configured, and validated Embedded Linux systems using Yocto, including image build, boot validation, and runtime debugging
- Developed and executed unit, integration, and system-level tests, including HIL and SIL test scenarios on real hardware and simulated environments
- Created Python and Bash scripts to automate build, test execution, simulation runs, and reporting within CI/CD pipelines (Jenkins, GitLab CI)
- Designed test cases from software and system-level requirements, covering normal operation, edge cases, and failure scenarios
- Performed low-level debugging using JTAG/GDB, analyzing boot issues, timing problems, interrupts, and peripheral behavior
- Developed and validated communication interfaces including UART, SPI, I2C, CAN using logs and external measurement tools
- Used simulation and virtual test environments to validate software behavior prior to hardware availability
- Read and interpreted hardware schematics to understand signal routing, pin multiplexing, and peripheral connections
- Supported PCB design and review activities using Altium tool, assisting with component selection, pin mapping, and bring-up readiness
- Collaborated with cross-functional hardware, firmware, and system teams to clarify requirements, document assumptions, and improve overall test coverage
- Developed web interfaces using HTML, CSS, and JavaScript (ES6) and basic REST API development with Node.js
- Experience testing web applications and building UI automation frameworks using Selenium WebDriver
Daniel Schäftner
Last position:
Embedded Software Engineer at Rawe Electronic GmbH / SCHELL
- Firmware low-level driver development for an advanced water tap with bluetooth on an EFR32BG module from Silicon Labs with Simplicity Studio
Ralf Kruse
Last position:
Builder at Solar Energy Trailer Project
- Built a solar energy trailer for decentralized autonomous energy storage and off-grid AC power supply
- Tested solar technology devices
- Conducted battery tests on 200 Ah 48 V systems
- Planned solar plants, storage systems, and distribution systems for solar installations
András Bognár
Last position:
Test Equipment Developer at Minebea Access Solutions
- Tested passenger car opening handle at system level integrating hardware, software and mechanics
- Built and provided complete test equipment for system testers using Arduino boards, Saleae Logic analyser, oscilloscope, multimeter, RLC meter, programmable power supplies and function generators
- Developed system testing concepts and constructed manual system test bench
- Supported system testers with hardware and software tools
- Products: BMW XNF, Rolls Royce, Audi eRing, JLR (Jaguar-Land-Rover)
Discover over 15,000 top freelancers
Statistics of experts using Oscilloscope
Aggregated from the professional profiles of matched freelancers.
Experience
20 years
Position duration
2 years
Positions per freelancer
14
Top business areas
Product Development, Quality Assurance, Information Technology
Top industries
Information Technology, Manufacturing, Automotive
Certification focus areas
Information Technology, Quality Assurance, Product Development
Bachelor's degree or higher
92%
Master's degree or higher
75%
Doctorate
8%
Certifications per freelancer
2
Most common languages
German, English, Italian
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using Oscilloscope
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
Signal insight
An oscilloscope shows voltage over time. It helps professionals see noise, timing, ripple, glitches, and edge quality that a multimeter cannot reveal. Teams use it to bring up boards, check interfaces, and verify analog and mixed-signal behavior.
Common work
- Debug power rails and switching issues
- Check clocks, buses, and trigger events
- Measure rise time, skew, and pulse width
- Validate sensor, RF, and embedded signals
- Capture intermittent faults during test
Tools and modes
Modern work often uses a DSO, a mixed-signal oscilloscope, or a USB scope. Strong specialists know triggers, bandwidth limits, sampling rate, memory depth, and probe choice. They also work with protocol decode, FFT views, and automated measurements when the task calls for it.
Where it matters
Oscilloscopes are common in electronics labs, production test, and field service. They support embedded systems, automotive electronics, industrial control, telecom hardware, and power electronics. In Germany, companies often bring in freelance specialists for local lab work, on-site debugging, or remote review of captures and test results.
When to hire
Bring in outside expertise when a signal problem blocks a release, a new board fails bring-up, or the test setup needs a clean reset. Freelance professionals are also useful when your team needs help choosing probes, setting triggers, or documenting a repeatable measurement method.
What strong experts do
Strong oscilloscope professionals do more than read waveforms. They ask about the circuit, the load, and the expected behavior, then connect the right probe and measurement method. Good work leaves you with clear captures, a short diagnosis, and test steps your team can repeat.
Frequently asked questions
Quick answers to the questions that come up most around Oscilloscope.
A strong oscilloscope specialist traces real signal behavior on hardware, not just in schematics. They debug timing, noise, overshoot, dropouts, and trigger-related faults, then explain what the waveform means for the circuit. That makes them useful in board bring-up, test, and failure analysis.
A digital scope is simply a digital oscilloscope, often called a DSO. It is still an oscilloscope, but it stores samples digitally and usually adds math, decoding, and advanced trigger options. When people say scope, they usually mean this family of tools.
Bring in oscilloscope help when a signal problem is blocking progress or the in-house team needs a second view on measurements. This is common during hardware bring-up, EMC troubleshooting, interface validation, and production test setup. Outside specialists are also useful when the team needs a clear method for repeatable captures.
A good oscilloscope professional usually understands circuits, probes, grounding, and signal integrity. For digital hardware, knowledge of I2C, SPI, UART, clocking, and power delivery is often important. On mixed-signal work, experience with firmware behavior and test equipment makes a big difference.
A oscilloscope project does not always need a senior specialist, but the problem should match the task. Simple capture work may need someone with basic lab skills, while hard faults, high-speed buses, or unstable power stages need deeper measurement experience. The real test is whether the person can choose the right setup and defend the result.
Many oscilloscope tasks can be done remotely if someone on-site can run the setup and share captures. Remote collaboration works well for waveform review, trigger strategy, and root-cause discussions. On-site time helps when probe placement, hardware access, or live fault reproduction matters, including projects in Germany with local lab constraints.
Look for a oscilloscope expert who can explain the waveform, the measurement setup, and the limits of the result. Strong professionals document probe choice, bandwidth, trigger logic, and what was ruled out. They should also connect the capture to the circuit behavior, not just point at a trace.
An oscilloscope measures the electrical shape of a signal over time, while a logic analyzer focuses on digital states and protocol-level timing. The two tools are often used together on embedded and interface problems. If analog quality, noise, or edge behavior matters, the oscilloscope is usually the first tool.
The average hourly rate of freelancers in Germany who have used Oscilloscope in their recent projects is 73 €, which corresponds to a daily rate of about 580 € based on an 8-hour working day.
Of the freelancers in Germany who have used Oscilloscope in their recent projects, 92% hold at least a Bachelor's degree, 75% hold at least a Master's degree, and 8% hold a doctorate.
On average, freelancers in Germany who have used Oscilloscope in their recent projects have 20 years of professional experience, with a single engagement typically lasting around 2 years.
The most common languages among freelancers in Germany who have used Oscilloscope in their recent projects are German (100%), English (100%), and Italian (16%).
The most common industries among freelancers in Germany who have used Oscilloscope in their recent projects are Information Technology (84%), Manufacturing (72%), and Automotive (56%).
The most common business areas among freelancers in Germany who have used Oscilloscope in their recent projects are Product Development (100%), Quality Assurance (96%), and Information Technology (92%).
Main locations of FRATCH Experts, who have recently used Oscilloscope
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg 
Munich Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
