KNX Experts in Germany
matched in minutes from over 15,000 CVs with the power of AIWork with specialists who plan building automation topologies, commission sensors in ETS, and integrate smart building networks, quickly matched from a pool of vetted and available freelancers.
Meet FRATCH Experts in Germany, who have recently used KNX
Thorsten W.
Last position:
Planning Coordination at apoprojekt
Unileverhaus Hamburg Conversion
Planning coordination for the conversion of the building according to the requirements of the new owner, Hamburg Port Authority, covering all building services trades on behalf of the general contractor apoprojekt.
Jürgen K.
Last position:
Project Management and System Architecture at 3E-motion Ventures GmbH
- Managed and developed the system architecture for the INEOS Grenadier model year 2028/29, ensuring interaction of all E/E system components according to GB/T 32960.
- Developed a product reference model for the entire E/E system of the vehicle.
- Coordinated requirements for Battery Management Systems (BMS) between OEM and suppliers at SYS.1 and SYS.2 levels for VW and Porsche.
- Created and aligned requirements for BMS fan control and OBD within Polarion.
- Developed a secure system architecture for steer-by-wire systems, including ECU hardware, software, and communication.
- Integrated various process design approaches from CARIAD, including SAFe (Scaled Agile Framework), FUSE/FAME, and RFLP, with ASPICE requirements.
- Created a process model in ESCAPE mapping essential components of SAFe onto ASPICE.
- Served as Lead Architect for electric drive development, focusing on parklock and cooling and lubrication functions for Mercedes AMG.
- Analyzed requirements in Integrity and developed functional models in UML using Enterprise Architect.
- Developed generic models for parklock and cooling functions, including sequence diagrams and a navigation model for the overall project.
Dirk B.
Last position:
Segment Manager Gastronomy / Club / Lounge at MAWA Design GmbH
- Management of segment gastronomy, club and lounge lighting solutions
- Professional competence in project management and coordination
- Budget and sales increase
Blaise-Vincent D.
Last position:
Technical Project Manager at DBIT GmbH
- Managed technical projects for passenger information systems in rail vehicles
- Managed project and requirements management and efficient use of resources
- Created cost plans and conducted risk assessments
- Coordinated staff management
Stefan P.
Last position:
MSR Coordinator at Worley
- Coordination and execution of cable pulling and cable laying projects to ensure on-time completion and compliance with quality standards.
- Effective planning and execution of cable tray installation, taking safety regulations and optimal use of resources into account.
- Successful execution of live online changeovers to minimize operational interruptions and optimize production processes.
- Shutdown coordination to ensure smooth processes during maintenance work and to avoid production delays.
- Monitoring and optimization of work processes through the use of MSR techniques to increase efficiency and reduce operating costs.
Alexander H.
Last position:
Freelancer & Owner at Hilex GmbH & Co. KG
- Responsible for planning, realization and support of complex industrial automation and building projects
- Experience with building systems and technical equipment from various manufacturers and industries
- Building automation: heating, ventilation and air conditioning, lighting and shading, security (alarm, access, video), energy management and smart home systems, building control and bus systems (e.g. KNX)
- Process and industrial plants: pipeline systems, sewage treatment plants, cross-transfer and lifting systems, pellet systems, friction heating systems, ventilation systems, dough mixing plant
- Robotics: handling robots from Fanuc, ABB, KUKA
- Special systems: painting application systems, feeding and destacking systems
- Automotive projects: implementation of three battery production lines for BMW in Germany and one production line in Hungary
Renke G.
Last position:
Cloud Architect at Open Knowledge GmbH
- Planning the cloud architecture
- Concept and design of the CI/CD pipeline and infrastructure as code
- Advising on selecting the necessary tools
- Advising and designing the cloud-native application
Ulrich L.
Last position:
Self-employed at ETL UG (haftungsbeschränkt)
- Electrical installation (planning distribution cabinets with and without KNX equipment)
- System integration
- Electrical design
Christoph M.
Last position:
Independent Managing Consultant at UGG Unsere Grüne Glasfaser
- PMO for multi dwelling units product implementation
Discover over 15,000 top freelancers
Statistics of experts using KNX
Aggregated from the professional profiles of matched freelancers.
Experience
26 years
Position duration
3.7 years
Positions per freelancer
10
Top business areas
Project Management, Operations, Product Development
Top industries
Manufacturing, Information Technology, Automotive
Certification focus areas
Information Technology, Operations, Production
Bachelor's degree or higher
71%
Master's degree or higher
14%
Certifications per freelancer
1
Most common languages
German, English, Dutch
Speak two or more languages
100%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using KNX
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
KNX experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (89%)
- Information Technology (56%)
- Automotive (44%)
- Construction (44%)
- Energy (44%)
- Transportation (44%)
- Professional Services (44%)
- Utilities (33%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Standardized Fieldbus for Modern Building Automation
KNX is the open worldwide standard for residential, commercial, and industrial building control. Rooted in European installation bus systems, it enables interoperability across hundreds of independent hardware manufacturers. Systems communicate seamlessly across twisted pair, IP networks, RF, and powerline infrastructure.
Core Engineering Capabilities and Tooling
- Topology design spanning lines, areas, and IP backbones
- System configuration and addressing inside ETS software
- Automation logic programming for HVAC, lighting, and shading
- Interface bridging to Modbus, BACnet, and DALI networks
- Diagnostic telegram analysis and traffic troubleshooting
Industrial and Commercial Adoption in Germany
German commercial properties, production plants, and high-spec residential builds depend heavily on decentralized bus architectures. Strict energy efficiency requirements drive commercial adoption. KNX projects in Germany require thorough documentation and strict compliance with national electrical standards and site codes.
When Organizations Need Dedicated Specialists
- Complex ETS commissioning across large multi-story commercial facilities
- Resolving persistent telegram collisions and line coupler errors
- Refurbishing legacy EIB installations into modern IP architectures
- Bridging physical fieldbus devices to higher-level SCADA platforms
Hardware Ecosystem and Manufacturer Interoperability
KNX certification ensures devices from brands like ABB, Gira, Siemens, MDT, and Schneider Electric integrate without proprietary gateways. Bus couplers, binary inputs, valve drives, and presence sensors share a unified addressing model. System integrators configure these cross-brand devices using a standardized project database.
Hallmarks of Seasoned KNX Professionals
Top specialists combine practical electrical system knowledge with networking depth. They structure group addresses cleanly, set fail-safe parameters for power interruptions, and secure IP interfaces against unauthorized local access. Their commissionings reduce energy waste while keeping building maintenance predictable.
Frequently asked questions
Questions about KNX? Start with the answers below.
A seasoned KNX professional demonstrates mastery of Engineering Tool Software (ETS), structured group addressing, and system design across lines and areas. They understand actuator parametrization, sensor integration, and how to interface bus lines with protocols like DALI and BACnet.
Unlike proprietary automation systems, KNX operates as an open, vendor-neutral standard managed by the KNX Association. Hardware from distinct manufacturers communicates seamlessly on the same bus line, preventing single-vendor lock-in and ensuring long-term spare part availability.
System design, logical topology planning, and ETS database configuration can be handled remotely. However, initial hardware testing, line verification, and live commissioning on sites in Germany typically require planned on-site attendance to coordinate with physical installation crews.
The European Installation Bus or EIB was the direct predecessor to the standard. Modern KNX is fully backward-compatible with legacy installations, enabling specialists to modernize older systems without replacing operational field devices.
Lighting control usually interfaces with DALI, while commercial HVAC components frequently bridge to BACnet or Modbus. Modern installations also employ KNXnet/IP to connect local bus networks to visualization servers and central management dashboards.
A qualified KNX professional provides the complete, unprotected ETS project file alongside detailed group address lists and topology diagrams. Complete handovers also include backup parameter exports, system operating manuals, and network schematics.
Security-focused professionals implement KNX Data Security and KNX IP Secure to encrypt telegram communications across lines and network routers. They isolate building networks, restrict open ports, and secure physical bus lines against unauthorized tampering.
While software configuration inside ETS is multilingual, coordination with local electrical contractors and facility managers on German project sites requires solid German proficiency. Technical documentation and tender specifications in Germany are almost exclusively produced in the German language.
The average hourly rate of freelancers in Germany who have used KNX in their recent projects is 102 €, which corresponds to a daily rate of about 817 € based on an 8-hour working day.
Of the freelancers in Germany who have used KNX in their recent projects, 71% hold at least a Bachelor's degree and 14% hold at least a Master's degree.
On average, freelancers in Germany who have used KNX in their recent projects have 26 years of professional experience, with a single engagement typically lasting around 3.7 years.
The most common languages among freelancers in Germany who have used KNX in their recent projects are German (100%), English (89%), and Dutch (22%).
The most common industries among freelancers in Germany who have used KNX in their recent projects are Manufacturing (89%), Information Technology (56%), and Automotive (44%).
The most common business areas among freelancers in Germany who have used KNX in their recent projects are Project Management (89%), Operations (78%), and Product Development (78%).
Main locations of FRATCH Experts, who have recently used KNX
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
