HEIDENHAIN Experts in Germany
matched in minutes from over 15,000 CVs with vetted freelancersHire experts who configure HEIDENHAIN controls, integrate TNC systems, and tune encoder-based motion for precise machine performance. Get fast, exact matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used HEIDENHAIN
Frank Stölzel
Last position:
Project & Interim Manager at Freelance
- See detailed project list above
Andreas Kürzinger
Last position:
Consultant / Interim Manager Engineering (Machining) at Neumayer Tekfor GmbH
Process optimization and automation
Development and documentation of savings potential to reduce manufacturing costs
Analysis of production processes to identify weak points
Coaching the Engineering department to improve ways of working and lean philosophy
Elimination of work steps with annual savings of approx. €150k
Increase in machine shift output from 3,600 to 4,250 pieces (18%)
Increase in shift output of two machines from 105 to over 120 pieces (14%)
Preparation for the integration of automated 100% inspections and laser marking into the machine process
Material optimization to stabilize machining processes
Ismail Özmen
Last position:
Interim Manager; Systemic Business Coach; Freelance CNC-CAM Programmer and Product Designer; Founder and at Self-employed
- Process optimization
- Productivity increase in production
- Lean management
- Shopfloor management
- Production management
- Production control and planning
- Outsourcing
- Leadership training
- Private coaching
- Career coaching
- Self-management training
- Heidenhain, Siemens, Millplus
- CAD design with Fusion 360, SolidWorks
- FDM
- SLA
- Product design
- Prototyping
- Series production
Jens Jülke
Last position:
Development Engineer – Design/Project Management/Purchasing at P-Wave AG
- Conception, development, and design of explosion generators: concept, draft, calculations, design of generators, procurement of parts, assembly of developed units, as well as tests and trials for functionality, safety, and optimization, further development up to series production
- Installation and commissioning of P-Wave PWG-S types 100 to 103 and subsequent types at customer sites
- Training of customer employees in handling the generators
- Maintenance of P-Wave PWG-S generators 100 to 103 and subsequent types
- Creation of PID and KKS numbering lists
- Project execution of orders in German-speaking regions
- Purchasing all parts and assemblies needed for project execution, and coordinating the assembly of the PWG-S system by partner companies
- Responsible for cost optimization of purchased parts
- Production planner
- Responsible for PDM data and optimization of data management, transition from manual to automatic data management
Marian Lempert
Last position:
Founder at Smart Mode Engineering e.K.
Commissioning of all types of machine tools with Sinumerik 840d PL & SL controls with up to 56 axes including Safety Integrated
PLC programming with Step7 in AWL, FUP, KOP, GRAPH, SCL
PLC programming in TIA Portal in AWL, FUP, KOP, GRAPH, SCL
NC programming (automation cycles, measurement cycles, and machining cycles)
Visualization using HMI Pro, Easy Screen, Sinumerik Operate & WinCC
Software development in interface programming (communication with ABB/Fanuc/KUKA robots, measuring machines, washing machines, tool monitoring systems and transport systems)
Cycle time optimization and drive optimization
Successful business founding
Successful building of a customer base
Expanded knowledge of other machine tools (Chiron, Stama, Index, Magdeburg, Boehringer, EMAG, Schuster, DMG MORI, Schaudt, Mikrosa, Felsomat, Risomat)
Successful completion of each individual project
Helmut Graf
Last position:
Project Manager at LPT – Akademie GmbH
- Connecting existing equipment with position and size detection, robot handling, palletizing
- Concept design and negotiations with suppliers
- Timeline for supply chain management
- Cost calculation, step-by-step planning
- Monitoring time allocation, supplier parts, and employees
Frank Hörner
Last position:
Aviation Technical Consultant at Aircraft Cabin Modification
- Product development of passenger restraint systems
- Machine / site relocation
- Tools used: MS Office 365, Outlook, Word, Excel
Eugen Funk
Last position:
Siemens Healthineers
- Optimization of a production line with automation connection
- Employee training
- Automation: 3x KUKA robots, lifting portal, measuring machine, engraving station, washing system
- Machining: 4x 5-axis CNC machines with SINUMERIK ONE control
Discover over 15,000 top freelancers
Statistics of experts using HEIDENHAIN
Aggregated from the professional profiles of matched freelancers.
Experience
32 years
Position duration
2.3 years
Positions per freelancer
18
Top business areas
Product Development, Production, Operations
Top industries
Manufacturing, Automotive, Professional Services
Certification focus areas
Operations, Quality Assurance, Human Resources
Bachelor's degree or higher
40%
Certifications per freelancer
3
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using HEIDENHAIN
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
HEIDENHAIN in practice
HEIDENHAIN is used in CNC machine tools where precision matters. Companies bring in specialists for controls, encoders, probes, and machine setup that must stay stable under production load. It is common in machining environments where fine motion, repeatability, and clean integration are essential.
Typical work
- TNC control setup and parameter work
- Encoder and scale integration
- Machine calibration and geometry checks
- PLC and interface coordination around the control
- Retrofit support for older machines and panels
Ecosystem and tooling
Strong professionals know the HEIDENHAIN control family, especially TNC systems, and understand how the hardware, drive chain, and measuring feedback work together. They also handle machine documentation, signal troubleshooting, and interface issues with NC and PLC parts. In Germany, this often involves coordination with plant teams, machine builders, and service staff.
When to bring in help
Companies usually need freelance expertise when a machine is misaligned, a control behaves inconsistently, or a retrofit has to be delivered without long downtime. They also look for support during commissioning, after a repair, or before a new line goes live. A good specialist finds the root cause, not just the symptom.
What strong specialists do
- Read machine behavior from alarms, feedback, and axis response
- Work carefully with drawings, manuals, and service data
- Keep motion settings consistent after changes
- Communicate clearly with production and maintenance teams
What to look for
A strong HEIDENHAIN professional has hands-on experience with controls, encoders, and precision measurement. They should be able to explain trade-offs clearly, work safely on live equipment, and document changes well. For cross-border teams, English is often enough; for on-site work in Germany, German can help speed up diagnosis and handover.
Frequently asked questions
Everything clients usually want to know about HEIDENHAIN, in one place.
HEIDENHAIN is used for precision motion control on CNC machine tools and related measuring systems. It appears in controls, encoders, scales, probes, and machine retrofits where accurate positioning matters. Many companies choose it for milling, turning, and other high-precision production tasks.
A strong HEIDENHAIN specialist helps with control setup, fault finding, calibration, and retrofit work. They are often brought in when a machine is not positioning correctly, a TNC system needs parameter changes, or a commissioning timeline is tight. The best freelancers focus on stable operation after handover.
HEIDENHAIN is often chosen for precision-focused machine tools, while Siemens and Fanuc are weighed for broader automation or different machine ecosystems. The right choice depends on the machine builder, the motion requirements, and the service setup around the control. A freelancer should know the real differences in operation, not just the brand names.
A good HEIDENHAIN professional usually also understands PLC logic, drive systems, measurement feedback, and machine geometry. Knowledge of NC programming, electrical troubleshooting, and documentation is also useful. On retrofit work, mechanical alignment skills matter as much as the control itself.
Simple support tasks may only need a specialist who knows the control family and the machine type. Complex retrofits, recurring alarms, or multi-axis precision issues need someone with deep field experience and a calm troubleshooting method. The harder the machine behaviour, the more important practical hands-on work becomes.
Some HEIDENHAIN tasks can be done remotely, such as reviewing alarms, checking parameter logic, or guiding a local team through a reset or test. Physical work is still needed for wiring, encoder checks, alignment, and final commissioning. In Germany, many projects use a mix of remote support and short on-site visits.
Look for clear diagnosis, safe working habits, and documentation that others can follow. A strong HEIDENHAIN specialist explains why a change is needed, tests the result on the machine, and leaves the system stable for production. Ask for examples of similar machine types, especially if the work involves TNC controls or a retrofit.
HEIDENHAIN is the vendor, while TNC is one of its well-known control families. People often search for both names when they need help with a machine tool, because the control screen and the underlying HEIDENHAIN system are closely linked in practice. A freelancer should understand both the brand and the specific TNC environment.
The average hourly rate of freelancers in Germany who have used HEIDENHAIN in their recent projects is 121 €, which corresponds to a daily rate of about 972 € based on an 8-hour working day.
Of the freelancers in Germany who have used HEIDENHAIN in their recent projects, 40% hold at least a Bachelor's degree.
On average, freelancers in Germany who have used HEIDENHAIN in their recent projects have 32 years of professional experience, with a single engagement typically lasting around 2.3 years.
The most common languages among freelancers in Germany who have used HEIDENHAIN in their recent projects are German (100%), English (100%), and French (13%).
The most common industries among freelancers in Germany who have used HEIDENHAIN in their recent projects are Manufacturing (100%), Automotive (88%), and Professional Services (50%).
The most common business areas among freelancers in Germany who have used HEIDENHAIN in their recent projects are Product Development (100%), Production (100%), and Operations (88%).
Main locations of FRATCH Experts, who have recently used HEIDENHAIN
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
