Cleanroom Technology Experts in Switzerland
matched in minutes by AIHire experts who design, qualify and improve controlled environments for pharmaceutical production, medical devices, biotechnology and advanced manufacturing. Work with specialists in HVAC, contamination control, GMP documentation and cleanroom monitoring, matched quickly with vetted, available freelancers.
Meet FRATCH Experts in Switzerland, who have recently used Cleanroom Technology
Malik O.
Last position:
AI Scientist at SQPS
- Intelligent Document Processing Engine with OCR & Computer Vision: Architected the end-to-end AI pipeline at the core of the SQPS GenAI document-processing product, which turns scanned paper and PDF batches into organised, searchable documents, combining image pre-processing, OCR and layout analysis for mixed-quality scans. Technologies: Python, OpenCV, Tesseract / PaddleOCR, PyTorch, FastAPI
- Automatic Document Splitting & Classification: Developed models that detect where one document ends and the next begins inside a single multi-document scan, and classify each one by type (invoices, contracts, letters, reports) to enable fully automated filing. Technologies: Python, PyTorch, scikit-learn, Hugging Face Transformers
- Information Extraction & Intelligent File Naming with LLMs: Implemented an LLM-based GenAI extraction system that reads dates, names and reference numbers from unstructured documents and uses them to generate consistent, rule-based file names, with configurable naming conventions per organisation. Technologies: Python, LangChain, OpenAI, SentenceTransformers, SQL
Hans S.
Last position:
Product Development Team Member at Smell Discettes GmbH
- Supply chain and regulatory setup for medical device re-engineering, launch and manufacturing ramp-up
Jürgen B.
Last position:
Design Engineer at LidroTec GmbH
- development of wafer manufacturing with cleanroom technology
- Tools: Inventor
Veit M.
Last position:
Test Method Development and Validation Engineer at Gebr. Renggli AG
- Test method validation for destructive testing (peel-force testing) according to ASTM F88/F88M
Martin A.
Last position:
Martin Aicher
Main areas of activity ⋅ Martin Aicher
Areas of expertise
Medical technology
Sensor technology
Technical optics
Mechatronics
Microsystems technology
Biocompatible materials
Implants and endoprosthetics
Project management
Quality management IPMA
Regulatory affairs
Education
Dr.-Ing. Medical Technology
M.Sc. Medical Technology
Dipl. Ing. (FH) Medical Technology
Surgical mechanic, precision mechanic
Methodical product development
26 years of research, development, verification and agile product development
5 years of hands-on manufacturing of micromechanical instruments and implants
Projects
Development and verification of technical optics
Microscopy
Endoscopy
Immersion optical systems
Optical sensors
Light guides
Device development — medical electronics, active medical devices
Electromagnetic therapy devices for microcirculation of blood vessels
Electric drives, precision mechanics motors
Embedded devices, Medicine 4.0 / Industry 4.0
Feasibility studies, prototype design, electromechanical, chemical and hydrodynamic characterization up to series maturity
Structural integration of motors for pump systems
Integration of motors for catheter drives
Implantable drive systems with motors
Bone saws with Maxon motors
Osteosynthesis implant (bone implant) with linear drive
Electromagnetic therapy devices for microcirculation of blood vessels
Gold and platinum substitution for electrodes
Electrochemical impedance spectroscopy (EIS)
Characterization and development of battery cells and Li-ion batteries
Biocompatible materials: stainless steel, titanium, nitinol, polymers, ceramics, composites
Vacuum device with pumps for wound healing
Braided tubes (reinforced hoses)
Shaft instruments and trocars
Surgical instruments, minimally invasive instruments (MIC)
Analytical instruments, sensors and fluid preparation
Monitoring systems
In vivo diagnostics (IVD)
Inline measurement systems for monitoring and analytical devices
Feasibility studies, prototype design, electrochemical and hydrodynamic characterization up to series maturity
Electrochemical deionization (EDI) as a monitor
Membrane technology
Measurement method and control of carbide saturation in cooling water
pH sensor
Optical sensors with laser diodes and LEDs
Dissolved O2 sensor
CO2 sensors
Ion-selective sensor (ISE)
Conductivity sensors
Turbidity sensor according to ISO 7027
Biosensors
Flow and pressure sensors
Gold and platinum substitution for electrodes
Electrochemical impedance spectroscopy (EIS)
Biocompatible materials: stainless steel, titanium, nitinol, polymers, ceramics, composites
Design of plastic injection-molded components and housings
Calculation and design of fluid channels
Design of metal die-cast components
Design of sheet metal parts
Implants and prostheses
Endoprosthetics: knee and hip endoprostheses
Bypass implants
Nitinol stents
Bone plates
Dental implants
Precision meshes
Instruments for medical technology
Angioplasty: PTCA percutaneous transluminal coronary angioplasty with balloon catheter
Catheter system as minimally invasive heart pump
EN ISO 10555-4: intravascular catheters
Braided tubes (reinforced hoses through precision meshes)
Thrombectomy with rotablation catheter
Trocars
Surgical instruments, minimally invasive instruments (MIC)
Endoscopes ISO 8600-1, EN 60601-2-18, EN 62471
Regulatory affairs for medical devices
CE for Europe (Class II and III), EU Medical Device Regulation 2017/745 (MDR)
EU Regulation 2017/746 for in vitro diagnostics (IVDR)
Ensuring complete documentation according to current regulatory requirements
FDA registration and approval 510(k), PMN, PMA, Class II, III
Design History Files (DHF), Device Master Record (DMR), Device History Record (DHR)
Internal and external audits
FDA and CE audits
Mock audits
Requirement engineering, user requirement specifications, functional requirement specifications
Quality management and relevant standards for medical technology
EN ISO 9001:2015
EN ISO 13485:2021
USA FDA 21 CFR 820 Quality Management System
FDA 21 CFR §§ 803, 806, 807, 830
In vitro diagnostics (IVD, IVDR) FDA 21 CFR §§ 600, 610, 660
USA FDA risk management for medical devices DIN EN ISO 14971:2019
P-FMEA for production
Usability of medical devices EN 62366-1:2021
CAPA (Corrective and preventive action) and GMP
Medical electrical equipment EN 60601-1:2013
EMC for medical devices DIN EN 60601-1-2:2022
Medical device software EN 62304:2018
Cell culture in cleanroom with different cell lines for biocompatibility testing of polymers and alloys
Biological evaluation of medical devices EN ISO 10993
Clinical investigation of medical devices ISO 14155
Manufacturing technology and processes
Process qualification and validation
Injection molding technology
CNC micromechanical manufacturing
Microsystems technology, printed circuit boards (PCB)
Joining technologies: laser welding of titanium, stainless steel, plastics as well as gluing and ultrasonic welding
Evaluation, setup and qualification of equipment
Thin film and surface technology
Coating of implants and tribological surfaces with chemical vapor deposition (CVD) and physical vapor deposition (PVD), sputtering of precious metals, stainless steels, nitinol, titanium alloys, polymers and ceramics
Plasma technology for functional coatings: hydrophilic and hydrophobic surfaces
Nanotechnology: surface functionalization: self-assembled monolayers (SAM)
Product Life Cycle Management
Finite element method
ANSYS FEM
Structural mechanics, statics
Fluid mechanics, flow simulations
Electrical engineering, electromagnetic fields
Characterization and testing of microelectronics
PCB (printed circuit board)
Sensor technology
Microcontrollers
CAN bus: ISO 11898, SAE
Control and data management with LabVIEW and Matlab
Programming language
Python 3.14
CAD
Autodesk Inventor
Pro/ENGINEER, PTC Creo Parametric
SolidWorks
Siemens NX
Solid Edge
Standards-compliant technical drawings
Endurance tests, mechanical, fluid mechanical, electrical and chemical characterization
Verification, V-Model, End of Line (EOL) testing
Writing work instructions for production, English regulatory documents and scientific articles
Support of clinical studies
Data processing, digital data management and statistics
Professional handling of Microsoft Office applications: PowerPoint, Word and macro programming for Excel
© 2026 M. Aicher
Axel K.
Last position:
Project Manager and Owner's Representative in Technical Trades at Carl Zeiss AG
- New factory buildings, ISO5 cleanroom
- Oberkochen
- Construction cost EUR 1.2 billion
Oliver W.
Last position:
Specialist Planner / Cleanroom Planning Lead at Major Aircraft Manufacturer
- Start-up and commissioning of the cleanroom
- Certification of the cleanroom
Robert O.
Last position:
Interim SQM Plastics at Thyssenkrupp Automotive
- Supplier management
- SQI audits
- Sustainability
Discover over 15,000 top freelancers
Statistics of experts using Cleanroom Technology
Aggregated from the professional profiles of matched freelancers.
Experience
30 years
Position duration
2.9 years
Positions per freelancer
19
Top business areas
Quality Assurance, Product Development, Project Management
Top industries
Healthcare, Manufacturing, Pharmaceutical
Certification focus areas
Quality Assurance, Product Development, Audit
Bachelor's degree or higher
86%
Master's degree or higher
71%
Doctorate
57%
Certifications per freelancer
5
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 11 Nov 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Switzerland are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Switzerland using Cleanroom Technology
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 11 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Cleanroom Technology experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Healthcare (100%)
- Manufacturing (100%)
- Pharmaceutical (63%)
- Aerospace and Defense (50%)
- Construction (38%)
- Education (38%)
- Automotive (25%)
- Chemical (25%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
What Cleanroom Technology Covers
Cleanroom Technology creates controlled environments where airborne particles, microorganisms, temperature, humidity and pressure stay within defined limits. It combines room design, air handling, filtration, surfaces, garments and operating procedures. Cleanrooms support production and testing where contamination could affect product quality, safety or measurement accuracy.
Where It Is Used
The technology is central to pharmaceutical manufacturing, biotechnology, medical devices, diagnostics, semiconductor production and precision assembly. It also supports research laboratories, sterile filling, aseptic processing and selected food or cosmetics applications. Requirements depend on the product, process, risk profile and applicable quality system.
- Plan classified rooms and material flows
- Support aseptic and sterile production areas
- Control pressure cascades and air change strategies
- Prepare environments for qualification and routine monitoring
Systems And Standards
A cleanroom project brings together HVAC, HEPA or ULPA filtration, building automation, environmental monitoring and facility utilities. Specialists work with ISO cleanroom classifications, GMP cleanrooms, particle counters, recovery testing and airflow visualization. They also connect room design with contamination control strategies, validation records and electronic quality systems.
When Companies Need Support
Companies often bring in freelance expertise during facility design, retrofit, technology transfer, qualification or remediation. External specialists can review user requirements, challenge layouts, prepare protocols and coordinate suppliers without adding permanent capacity. In Switzerland, projects may require close collaboration with local production, quality and facilities teams, while some documentation and design work can be handled remotely.
- Define user requirements and contamination risks
- Review HVAC, zoning and personnel flows
- Write or execute qualification protocols
- Investigate excursions and recurring contamination events
What Strong Experts Deliver
Strong professionals understand both airflow behaviour and regulated operations. They can translate process risks into room grades, pressure concepts, monitoring plans and practical procedures. They are comfortable with deviation management, change control, risk assessment and technical writing, and they explain decisions clearly to production, quality and maintenance stakeholders.
Choosing The Right Specialist
Look for evidence of comparable facilities, not just familiarity with the term cleanroom. Ask which classifications, processes, qualification stages and monitoring systems the expert has handled, and how they documented results. For remote work, agree on access to drawings, data and quality records; on-site presence remains valuable for smoke studies, commissioning, investigations and operator training.
Frequently asked questions
The facts hiring teams ask for most often when it comes to Cleanroom Technology.
Cleanroom Technology is used to control airborne contamination and environmental conditions in sensitive operations. It supports pharmaceutical and biotechnology production, medical devices, diagnostics, semiconductor work, research and other processes where particles or microorganisms can compromise quality.
A cleanroom is a controlled environment designed around defined cleanliness and operating criteria, often including particle classification, filtration and pressure control. The broader term controlled environment can also cover areas with controlled temperature, humidity or microbiological conditions without the same cleanroom classification.
A strong Cleanroom Technology specialist often combines HVAC and airflow knowledge with GMP, contamination control, qualification and validation. Useful adjacent skills include environmental monitoring, building automation, risk assessment, deviation handling, technical documentation and facility utilities.
The right level depends on the project stage and risk. A basic layout review may need focused design expertise, while sterile manufacturing, remediation or qualification requires a professional who has handled comparable processes, documentation and regulated handovers.
Cleanroom Technology planning, document review, risk assessment and protocol writing can often be completed remotely. Site surveys, commissioning, airflow visualization, investigations and operator training usually benefit from on-site collaboration in Switzerland, with clear coordination across quality, facilities and production teams.
Cleanroom Technology projects commonly consider ISO cleanroom classifications, GMP expectations and process-specific quality requirements. The applicable framework depends on the industry, product and operation, so the specialist should connect standards with contamination risks rather than treating classification as the only design objective.
GMP cleanrooms are designed within a regulated pharmaceutical or related quality system, with requirements covering operation, documentation and qualification as well as cleanliness. ISO cleanrooms primarily describe airborne particle classification; an ISO classification alone does not establish complete GMP compliance.
Ask a Cleanroom Technology professional to explain a comparable project from requirements through qualification or operation. Review the clarity of their contamination control rationale, protocols, reports and deviation decisions, and check whether they communicate practical actions to both technical and quality stakeholders.
The average hourly rate of freelancers in Switzerland who have used Cleanroom Technology in their recent projects is 129 €, which corresponds to a daily rate of about 1,035 € based on an 8-hour working day.
Of the freelancers in Switzerland who have used Cleanroom Technology in their recent projects, 86% hold at least a Bachelor's degree, 71% hold at least a Master's degree, and 57% hold a doctorate.
On average, freelancers in Switzerland who have used Cleanroom Technology in their recent projects have 30 years of professional experience, with a single engagement typically lasting around 2.9 years.
The most common languages among freelancers in Switzerland who have used Cleanroom Technology in their recent projects are German (100%), English (100%), and French (50%).
The most common industries among freelancers in Switzerland who have used Cleanroom Technology in their recent projects are Healthcare (100%), Manufacturing (100%), and Pharmaceutical (63%).
The most common business areas among freelancers in Switzerland who have used Cleanroom Technology in their recent projects are Quality Assurance (88%), Product Development (75%), and Project Management (75%).
Main locations of FRATCH Experts, who have recently used Cleanroom Technology
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Countries:
- Germany
- Switzerland
Zurich Geneva Basel Bern Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
