Experience
Motor Development Intern
Denso Europe
- Carried out FEM simulations of a novel brushless externally excited synchronous motor with JMAG to reduce iron losses by 8%
- Developed MATLAB scripts to optimize the total loss profiles based on machine parameters
- Developed a Python-based GUI tool for calculating optimal motor design parameters
- Created Python scripts in JMAG to automate and improve simulation processes
Master Thesis, Production Engineering of E-Mobility Components
RWTH Aachen University
- Conducted a benchmarking study on 30 EV models (2018–2023) to evaluate product and manufacturing technologies of PMSM, IM, and EESM topologies
- Analyzed drive architectures to correlate mechanical integration and component interfaces with overall power density and efficiency
- Analyzed stator and rotor design methods and compared joining and lamination technologies to evaluate the impact on magnetic losses and mechanical integrity
- Investigated modern winding technologies (U-hairpin, I-pin, X-pin) to identify improvements in copper utilization, insulation design, and electromagnetic performance
- Quantified technological trends in power-to-weight ratio, stator scaling, and conductor segmentation through statistical and comparative data analysis
Student Assistant
Institute for Electrical Machines, RWTH Aachen
- Designed PMSM motors (surface-mounted, IPM) in 2D/3D with Autodesk Inventor
- Conducted finite element simulations using Ansys Workbench to optimize flux density in a PMSM by 12% by varying magnet geometry for surface-mounted and interior permanent magnets
- Developed mathematical models for hysteresis and coercive field strength based on simulation and experimental data with MATLAB
- Calculated eddy current losses in different machine variants using MATLAB
- Automated post-processing of simulations using Python code in Visual Studio
Student Assistant
RWTH Aachen University, Teaching and Research Area Mechatronics in Mobile Propulsion
- Calibrated vehicle exhaust after-treatment system using real-time HiL simulation model and measurement data
- Enhanced performance of an automotive simulation model in Simulink by testing and debugging, specifically targeting the engine and exhaust systems
- Validated critical exhaust measurements by comparing data with simulated quantities in dSpace Configuration Desk
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Automotive and Education.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Product Development, Research and Development, and Quality Assurance.
Frequently asked questions
Have questions? Find more information here.
Saadat is based in Hamburg, Germany and can operate in on-site, hybrid, and remote work models.
Saadat speaks the following languages: English (Advanced), German (Intermediate).
Saadat has at least 1 year of experience. During this time, Saadat has worked in at least 3 different roles and for 4 different companies. The average length of individual experience is 4 months. Note that Saadat may not have shared all experience and actually has more experience.
Based on recent experience, Saadat would be well-suited for roles such as: Motor Development Intern, Master Thesis, Production Engineering of E-Mobility Components, Student Assistant.
Saadat's most recent position is Motor Development Intern at Denso Europe.
In recent years, Saadat has worked for Denso Europe, RWTH Aachen University, Institute for Electrical Machines, RWTH Aachen, RWTH Aachen University, and Teaching and Research Area Mechatronics in Mobile Propulsion.
Saadat is most experienced in industries like Automotive and Education.
Saadat is most experienced in business areas like Product Development, Research and Development, and Quality Assurance.
Saadat holds a Master in Computer Aided Mechanical Engineering from RWTH Aachen University and a Bachelor in Industrial and Production Engineering from B.V.Bhoomaraddi College of Engineering and Technology, Hubli.
The availability of Saadat needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 19 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Mohammed A.
Last position:
Consultant: Senior Power System Engineer at DEME, CWD, DERlab, LifePower
- TSO, DSO grids simulation and analysis
- Grid design integration of 3.4 GW RES and 400 MW of BESS for a large-scale green hydrogen plant
- Grid connection requirements for RES and BESS connection (50kW - 1MW)
- Requirements for providing Ancillary Services to the TSO from the flexible assets
- Expertise in Pre-FEED/FEED studies, EPC tender preparation, bid evaluation, and supplier negotiations for HV/MV substations and renewable integration projects
- Support for EPC design reviews, technical documentation, and FAT/SAT supervision across solar, wind, and hybrid energy systems
Reuf K.
Last position:
Self-employed Mechanical Design Engineer at Herrenknecht Vertikal GmbH (Herrenknecht AG)
- Development and design of a new oil drilling machine for the Beatrice oil rig, Scotland
- Concept development of the Pipe-Overdeck work platform with crane, total load 200 tonnes
- Static FEM and CFD flow calculations to ensure safe drainage of oil-contaminated wastewater
- CAD: CREO, Model Manager, SAP
Jan N.
Last position:
Managing Director at Energy Data GmbH
- The energy baseline is a snapshot of energy metrics under given reference conditions. Changes in these conditions can greatly affect performance and must be adjusted for analysis – ISO 50001 calls this normalization.
- A simple example is the weather's effect on heating needs, which is normalized by degree days.
- Some energy data is available immediately and can be integrated into your systems via an interface – from simple Excel files to professional energy management software.
- From introducing an energy management system to energy efficiency measures and technology consulting – as an independent partner, I am here to advise you!
Dana A.
Last position:
Software Engineering Consultant at Project A
- Advising clients on software engineering and technical product management.
Sherif O.
Last position:
Developer at NXP Dresden
- Identified and resolved AUTOSAR violations in master code to ensure compliance with automotive software standards
- Verified product requirements against implementations using DOORS, ensuring full traceability and alignment with ISO 26262
- Managed and refined JIRA tickets, documented processes in Confluence, and maintained version control via GIT/Bitbucket
- Performed post-rebase code cleanup and validation across branches to maintain consistency in automotive software development
- Applied quality management principles to ensure compliance with automotive SPICE/ASPICE processes, including DSP and audio-related software validation
- Leveraged knowledge of Xtensa chips for low-level optimization in automotive C/C++ embedded systems
Muharrem S.
Last position:
General Manager at REPSEM/REPKON-Energetic (Mechanical Engineering)
REPSEM/REPKON-Energetic (Mechanical Engineering) – General Manager. Start-up company. Setting up the company and its structure. Creating processes, preparing document templates, planning workflows, hiring employees to meet company goals. Training employees and introducing them to the first company project. Project acquisition, meetings about projects with companies. Expanding company goals and strategy. Visiting companies for partnerships. Leading the first company project together with the PM.
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a Motor Development Intern
Nearby freelancers
Professionals working in or nearby Hamburg, Germany

