Muhammad Hammad - Working Student Electrical Engineer Automation

Q: Where is Muhammad based?

Muhammad is based in Munich, Germany .

Q: What languages does Muhammad speak?

Muhammad speaks the following languages: English (Advanced), German (Intermediate), Italian (Elementary) .

Q: How many years of experience does Muhammad have?

Muhammad has at least 4 years of experience. During this time, Muhammad has worked in at least 2 different roles and for 2 different companies . The average length of individual experience is 2 years and 2 months . Note that Muhammad may not have shared all experience and actually has more experience.

Q: What is Muhammad's latest experience?

Muhammad's most recent position is Working Student Electrical Engineer Automation at ANDRITZ Gmbh .

Q: What companies has Muhammad worked for in recent years?

In recent years, Muhammad has worked for ANDRITZ Gmbh .

Q: Which industries is Muhammad most experienced in?

Muhammad is most experienced in industries like Energy and Manufacturing .

Q: Which business areas is Muhammad most experienced in?

Muhammad is most experienced in business areas like Operations and Product Development .

Q: What is Muhammad's education?

Muhammad holds a Master in Electrical Engineering and Information Technology from Deggendorf Institute of Technology and a Bachelor in Electrical Engineering from University of Engineering and Technology Lahore .

Q: What is the availability of Muhammad?

Muhammad is immediately available full-time for suitable projects.

Recommended expert

Munich, Germany

Check rate

Experience

Aug 2023 - Dec 2023

5 months

Munich, Germany

Working Student Electrical Engineer Automation

ANDRITZ Gmbh

Worked on TexManager
Cost management of PLCs
Worked on control logics through PLC programming for different changes in automated systems

Jan 2017 - Dec 2020

4 years

Lahore, Pakistan

Electrical & Instruments Engineer

Jilani Energy Private Limited

Sensors and instruments installed all over the plant (e.g. temperature sensors, flowmeters, pressure gauges)
Motor starters such as variable frequency drives (inverters), star-delta, reverse-forward & DOL
Worked on Ethernet communication between instruments across the plant
Worked on distributed control systems (DCS) and their interconnection with motor starters and instruments
Installed PLCs and configured communication with computers; worked on SIMATIC S7 for Siemens PLCs
Implemented protection systems for transformers and generators/alternators

Industry Experience

See where this freelancer has spent most of their professional time.

Experienced in Energy and Manufacturing.

Energy

Manufacturing

Business Area Experience

See which departments and functions this freelancer has contributed to most.

Experienced in Operations and Product Development.

Operations

Product Development

Skills

Microsoft 365
Power Point
Excel
Word
Python
C
C++
Java
Information Technology (It)
Electronic Pcb Design & Simulation Tools
Proteus (Isis/Ares)
Altium Designer
Pcb Design
Soldering
Ltspice
Plecs
Multisim
Labview
Analog/Mixed-Signal Circuits Design & Verification
Adcs, Dacs, Plls, Dlls, Filters, Active Mixers, Driver Stages, Biasing Circuits, Ldo Regulators
Operational Amplifiers, Comparators And Switched-Capacitor Circuits
Electrical Laboratory Equipment
Multimeters
Real-Time Oscilloscopes
Arbitrary Waveform/Signal Generators
Oscilloscopes
Signal/Spectrum Analyzers
Dc-Dc & Dc-Ac Conversion
Buck-Boost Converters
Single Phase Ac Converters
Three Phase Inverters (Pwm Processing And Modelling)
Model-Based Design And Testing
Designing Matlab Models Using Simulink
Matlab Libraries And Integration Of Libraries In Models
Model-In-The-Loop Testing
Software-In-The-Loop Testing
Human Machine Interface (Hmi) Design/Development
Hmi Software: Siemens Wincc, Factorytalk View (Allen-Bradley), Wonderware Intouch
Plc Software And Development Tools
Siemens Tia Portal For Siemens Plcs
Rslogix/Studio 5000 For Allen-Bradley (Rockwell Automation) Plcs
Principles And Interfaces Of Proximity Sensors, Photoelectric Sensors, Encoders, Solenoids, Valves, And Motors
Configuring Sensors And Actuators And Integrating Them With Plc I/O Modules
Motion Control And Servo Systems
Integrating Servo Drives, Vfds And Stepper Motors With Plcs
Star-Delta Starters, Electromechanical Actuators, Bldc Motors, Encoders, Drivers, Sensors
Motor Control Logic And Pid Control
Designing Control Algorithms For Electric Motors (Bldc, Induction, Permanent Magnet Synchronous Motors)
Control Strategies For Sequential Control, Interlocking, And Safety Systems
Implementing Pid Control In Plcs For Regulating Temperature, Pressure And Flow
Signal Processing
Digital Signal Processing
Fourier Analysis
Error Detection And Correction
Radio Frequency Engineering
Antenna Design
Rf Propagation
Noise And Interference Management
Rf Simulation Tools: Awr, Advanced Design System (Ads), Hfss
Network/Communication Protocols
Tcp/Ip
Ethernet
Http/Https
Vlans
Routing
Switching
Bluetooth

Languages

English

Advanced

German

Intermediate

Italian

Elementary

Education

Oct 2021 - Jun 2025

Deggendorf Institute of Technology

MS · Electrical Engineering and Information Technology · Deggendorf, Germany

Oct 2013 - Jun 2017

University of Engineering and Technology Lahore

BS · Electrical Engineering · Lahore, Pakistan

Statistics

Experience

Total positions 2

Experience in Energy 4 y

Avg length 2 y 2 m

Longest experience 3 y 11 m

Global Experience

Countries worked in 2 (Germany, Pakistan)

Primary country Germany

Expertise

Recent roles Working Student Electrical Engineer Automation, Electrical & Instruments Engineer

Main industries Energy, Manufacturing

Main business areas Operations, Product Development

Qualifications

Highest degree Master

Profile

Created

November 2025

Need a freelancer? Find your match in seconds.

Try FRATCH GPT

Frequently asked questions

Have questions? Find more information here.

Where is Muhammad based?

Muhammad is based in Munich, Germany.

What languages does Muhammad speak?

Muhammad speaks the following languages: English (Advanced), German (Intermediate), Italian (Elementary).

How many years of experience does Muhammad have?

Muhammad has at least 4 years of experience. During this time, Muhammad has worked in at least 2 different roles and for 2 different companies. The average length of individual experience is 2 years and 2 months. Note that Muhammad may not have shared all experience and actually has more experience.

What roles would Muhammad be best suited for?

Based on recent experience, Muhammad would be well-suited for roles such as: Working Student Electrical Engineer Automation, Electrical & Instruments Engineer.

What is Muhammad's latest experience?

Muhammad's most recent position is Working Student Electrical Engineer Automation at ANDRITZ Gmbh.

What companies has Muhammad worked for in recent years?

In recent years, Muhammad has worked for ANDRITZ Gmbh.

Which industries is Muhammad most experienced in?

Muhammad is most experienced in industries like Energy and Manufacturing.

Which business areas is Muhammad most experienced in?

Muhammad is most experienced in business areas like Operations and Product Development.

What is Muhammad's education?

Muhammad holds a Master in Electrical Engineering and Information Technology from Deggendorf Institute of Technology and a Bachelor in Electrical Engineering from University of Engineering and Technology Lahore.

What is the availability of Muhammad?

Muhammad is immediately available full-time for suitable projects.

What is the rate of Muhammad?

Muhammad's rate depends on the specific project requirements. Please use the Meet button on the profile to schedule a meeting and discuss the details.