USB Experts in Germany
in minutes from over 15,000 CVs with the power of AI.Hire experts who design USB device connections, firmware integration, cable and port compatibility, and test setups for peripherals, embedded systems, and industrial hardware. Get fast, precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used USB
Jens Schneeweiß
Last position:
Network Technology at ISP, Internet Service Provider, BGP Peering
- Optimization of the transmission media of the data links in the Ruhr area
- Configuration/expansion of switches and routers for an autonomous system AS
- Improve the network protocols used Layer 2/3 (OSI model), RSTP, broadcast, etc.
- Laying cables, crimping, antennas, routers, switches
- Maintenance, expansion, selection and prioritization of troubleshooting measures for network monitoring (PRTG, The Dude)
- Organization and new connection of another BGP peering, data center, NGN fiber optic
- VPN IPSec site connections for 6 sites with PFSense, Fritzbox
- Configuration of WLAN devices (Mikrotik, UBNT
Label: TCP/IP, VLAN, BGP, OSPF, MPLS, VPLS, routing protocols, WLAN, EoIP, PPPoE, routing, SNMP, DHCP, DNS, NAT, native IP, VLAN, Ethernet, VoIP., switches and routers from: Nortel, Cisco, MikroTik, UBNT., network management systems: The Dude, PRTG, UISP
Kacper Kowalski
Last position:
Author
Seqnaut and Sycosm (WIP) – Embedded Audio DSP & Synthesis Platform
- Embedded audio DSP framework — synthesizers, effects, drum machines; modular audio graph
- Sequencing: PianoRoll, StepGrid, MasterClock; 8-voice polyphonic synth; CLI + OSC
- Transient Detector — dual-envelope adaptive threshold, guitar attack detection
- Hardware: Teensy 4.1, custom AFE design tapping BOSS GX-100; MIDI FX integration
Label: C++23, C, Python, CMake, FreeRTOS, Teensy 4.1 (ARM Cortex-M7), Teensy Audio (Stoffregen), DaisySP, I2S/SAI, OSC, MIDI
Peter Jehle
Last position:
Interim Teamlead at Somnomedics
- Interim Teamlead to setup a project with STM32 and NORA Bluetooth module.
- Customer is planning new hardware to replace existing hardware with Bluetooth communication instead cable connection.
- Project was already started but the requirements were not defined.
- System based on STM32 and Nora B106 CPU.
- Analyzing the existing available code base.
- Checking for possible solutions to get the project working.
- Defining the requirements.
- Applying some rules to improve the team communication.
- Working with the NRF tools to get the custom board based on NORA B106 (NRF5340) working.
- Implementation of a simple device communication by Bluetooth.
- Preparation of documentation.
- Leading communication meetings.
- Conducted discussions with customer.
- Tools used: JIRA, OneNote, Git, Confluence, Nordic NRF, Nora B106.
Valentin Reuter
Last position:
Freelance Hardware Development Engineer at Swarm Biotactics
PCB design with Altium, MCU Programming, Prototyping
Adam Richter
Last position:
Senior Software Engineer at Tonies GmbH
- Complete platform upgrade from Expo 53 to Expo 54, considering project-critical breaking changes
- Version bump of react-native 0.79.5 to 0.81.5 including consolidation, updating, and reinstalling all project-related dependencies (JavaScript, native modules, build tools, TypeScript tooling)
- Identifying and fixing incompatible libraries as well as adjusting iOS and Android configurations (Gradle, Pods, build scripts)
- Enabling and integrating the React Native New Architecture (TurboModules & Fabric) including adjusting native interfaces, build configurations, and feature flags
- Cleaning up technical debt and harmonizing platform-specific implementations to ensure long-term maintainability
- Stabilizing the project through detailed debugging, regression analysis, and adjustments to the tooling chain (Metro, Babel, TypeScript)
- Conducting comprehensive test cycles (unit, E2E, device tests) and optimizing CI/CD pipelines for Bitrise and GitLab
- Ensuring stable releases for Android & iOS in conjunction with analytics, engagement, and monitoring systems
Marco Hoberg
Last position:
Senior IT Project Manager – Technical Stream Lead at BEW Berliner Energie und Wärme GmbH
- Leading technical stream in IT projects
Roland Rathmann
Last position:
Support in Ongoing Project at Automotive Supplier
- closing the safety case
- creation of meaningful traceability matrices and targeted test expansion
- transferring requirements into other database systems
- structuring the requirements, assessing their completeness, and setting up new test cases based on use-case–based test strategies and the results of internal traceability matrices
- partial automation of tasks within a requirement assessment tool
- tools and languages: MS Teams, reqIF, Enterprise Architect, Codebeamer, proprietary tools for creating and evaluating traceability matrices (approx. 1000 x 1000)
Daniel Opitz
Last position:
FMEA Moderator and Expert at Tier1 Automotive
Creating structured item definitions as a basis for FMEA execution
Redesign/optimization of existing FMEAs according to the VDA/AIAG manual in PeakAvenue/Plato. Focus on the quality of defining functions and failure modes
Adding functions and failure modes
Revising the risk analysis. Adding and rating prevention and detection measures
Developing a framework for improved tracking of measures
Team training
Improved FMEA with a focus on early failure prevention / early failure mode avoidance
Successfully held customer reviews
Sergej Vontobel
Last position:
Software Developer Motor Control (Project "Multi DMR – Motor-Control") at Lorch Schweißtechnik GmbH
- Modification and redesign of the software for a series component
- Review of the software concept and extension of functionality
- Modification of software functions for DC motor control
- Hardware: ARM STM32G474, CAN bus, Lauterbach T32
- Software: Microsoft Visual Studio Code
Tamás Nagy
Last position:
JAVA development for thermal printer test program at GeBE Elektronik und Feinwerktechnik GmbH
JAVA development for thermal printer test program
Further development of the free thermal printer test program in Java 1.8 AWT and Swing
Creating new plugins for sensor feedback using a real-time bar chart
Using multiple printer languages for USB, UDP, TCP and RS232 communication
Improving usability and responsiveness with threads and string buffering
Querying and displaying network configuration
Converting and processing hex data from printer responses
Advanced study of servomotors and USB bus
Enumerating available USB ports from the Windows Registry, retrieving additional information via PowerShell, parsing and listing all in a Java list box
Fixing reported database errors
Detecting if the printer driver is installed and recognizing physically connected devices
Migration to Windows 11
Handling customer tickets as part of support in C++ and Qt6
Writing CMake scripts
Compiling STM32 printer firmware with CMake and managing the process in FileMaker Pro
Technologies: Eclipse, Java 1.8, AWT, Swing, RS232, USB, TCP, UDP, PowerShell, servomotor technology, Windows 10 and Windows 11, WSL 2.4, Ubuntu Linux, CMake, Qt6, FileMaker Pro
Anuja Chandran
Last position:
Embedded Software Engineer at Digital Core Technology
- Designed and implemented embedded firmware in C/C++ for ARM-based microcontrollers and SoCs (STM32, NXP, Infineon)
- Worked across bare-metal, FreeRTOS, and Embedded Linux environments, contributing to BSP-level functionality, driver bring-up, and system integration
- Built, configured, and validated Embedded Linux systems using Yocto, including image build, boot validation, and runtime debugging
- Developed and executed unit, integration, and system-level tests, including HIL and SIL test scenarios on real hardware and simulated environments
- Created Python and Bash scripts to automate build, test execution, simulation runs, and reporting within CI/CD pipelines (Jenkins, GitLab CI)
- Designed test cases from software and system-level requirements, covering normal operation, edge cases, and failure scenarios
- Performed low-level debugging using JTAG/GDB, analyzing boot issues, timing problems, interrupts, and peripheral behavior
- Developed and validated communication interfaces including UART, SPI, I2C, CAN using logs and external measurement tools
- Used simulation and virtual test environments to validate software behavior prior to hardware availability
- Read and interpreted hardware schematics to understand signal routing, pin multiplexing, and peripheral connections
- Supported PCB design and review activities using Altium tool, assisting with component selection, pin mapping, and bring-up readiness
- Collaborated with cross-functional hardware, firmware, and system teams to clarify requirements, document assumptions, and improve overall test coverage
- Developed web interfaces using HTML, CSS, and JavaScript (ES6) and basic REST API development with Node.js
- Experience testing web applications and building UI automation frameworks using Selenium WebDriver
Daniel Schäftner
Last position:
Embedded Software Engineer at Rawe Electronic GmbH / SCHELL
- Firmware low-level driver development for an advanced water tap with bluetooth on an EFR32BG module from Silicon Labs with Simplicity Studio
Thomas Klaube
Last position:
Software Design & Development: VideoDownloader at Ing.-Büro Thomas Klaube
Development of an application for macOS to view and download video streams as well as to view and record live TV streams.
Technologies: C/C++, Objective-C, Qt 6.7.2 / Qt 5.9.6, QtCreator, QtDesigner, QtLinguist, Xcode, UI development based on QtWidgets, qmake, make, git, shell scripting, Apple LauchAgents, Apple AVFoundation, ffmpeg, ffplay, fffprobe.
Platforms: macOS Sonoma, macOS Mojave.
Kuldeep Gadhiya
Last position:
Student research assistant at Technische Universität Dresden
- Designed RF component matching networks, Wilkinson power dividers, embedded symmetric stripline transmission lines, and other RF components.
- Performed measurements and analysis to identify the main error source in a spherical scanner.
- Developed bow-tie antennas for ground-penetrating radar and tested them for interference in a rover.
Juan Solano Menacho
Last position:
Embedded Software Consultant at Embedded Software Consulting
- Development of a solar charge controller on an STM32 platform running FreeRTOS
- Development of embedded DSP software for automotive audio applications. Real-time signal processing software using C and Python/NumPy
- Development of serial drivers (SPI, I2C, UART) and real-time components in C for an electricity meter telemetry platform
- Unit testing with Unity and integration testing with Python
Discover over 15,000 top freelancers
Statistics of experts using USB
Aggregated from the professional profiles of matched freelancers.
Experience
23 years
Position duration
2.2 years
Positions per freelancer
17
Top business areas
Product Development, Quality Assurance, Information Technology
Top industries
Manufacturing, Information Technology, Automotive
Certification focus areas
Information Technology, Quality Assurance, Product Development
Bachelor's degree or higher
92%
Master's degree or higher
73%
Doctorate
19%
Certifications per freelancer
2
Most common languages
English, German, Spanish
Speak two or more languages
100%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using USB
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
USB basics
USB, or Universal Serial Bus, is the standard for connecting devices, moving data, and supplying power. Companies use it for peripherals, storage, industrial controllers, test equipment, and embedded products. Strong specialists know how the protocol, connectors, and power rules work together.
Common use cases
- Device connection for keyboards, cameras, scanners, and audio gear
- Firmware work for embedded boards and custom hardware
- Data transfer for storage, diagnostics, and service tools
- Power delivery planning for charging and low-power devices
Ecosystem and tooling
USB work often touches host stacks, device firmware, drivers, and hardware validation. Professionals may work with USB-C, USB 2.0, USB 3.x, and USB4, plus tools for protocol analysis, board debugging, and compliance testing. They also need to understand cable quality, enumeration, and endpoint behavior.
When to bring in freelance help
Companies bring in USB specialists when a device is not detected, transfer speed is unstable, or power negotiation fails. The same applies when a new product must support several connector types or needs reliable behavior across operating systems. In Germany, this often matters for hardware teams that need short-term, on-site help during lab testing or remote support for firmware reviews.
What strong specialists do
Strong professionals trace issues from the connector to the protocol layer. They check descriptors, hub behavior, power draw, transfer modes, and driver interaction. They also document the problem clearly so hardware, firmware, and test teams can act on it.
What quality looks like
Good USB experts write down test steps, identify root causes, and suggest fixes that fit the product design. They think about backward compatibility, signal integrity, and user experience, not only the immediate bug. They also know when a problem is electrical, software-related, or caused by the wrong cable or port choice.
Frequently asked questions
What clients ask us most about USB — answered in short.
USB is used to connect devices, move data, and deliver power. In practice, that includes peripherals, storage, embedded products, service ports, and test equipment. For many companies, it is the simplest way to make hardware easy to use and easy to support.
You should bring in a USB specialist when a device is not enumerating, transfer speeds are inconsistent, or power negotiation is failing. It also makes sense during new product design, connector changes, or compliance testing. Early support usually avoids expensive redesign work later.
USB is a wired interface, so it is usually chosen for stable data transfer, charging, and device control. Bluetooth and Wi-Fi are better for wireless communication, but they add latency, pairing steps, and radio complexity. Many products use USB for setup or service and wireless for daily use.
A strong USB freelancer usually understands firmware, hardware debugging, and basic driver behavior. Knowledge of signal integrity, power delivery, and protocol analysis is also valuable. For embedded products, experience with boards, oscilloscopes, and logic analyzers helps a lot.
Not every USB task needs deep seniority, but complex issues usually do. Simple connector checks or basic integration can be handled by a specialist with practical experience, while custom device classes, power problems, and cross-platform behavior need someone stronger. The right level depends on how much of the stack is involved.
Many USB tasks can be done remotely if the specialist has logs, captures, schematics, and firmware access. On-site help is better when hands-on lab testing, hardware swaps, or compliance setup are needed. In Germany, teams often use a mix of remote review and on-site validation.
Look for evidence that the USB expert has solved real device issues, not just listed the standard terms. Good signs are clear debugging methods, familiarity with USB-C and legacy ports, and the ability to explain root cause in plain words. Ask how they would test enumeration, power, and data stability.
The most common USB problems are bad cable assumptions, unstable power, failed enumeration, and speed that does not match the design. Connector choice can also create issues when a product must support older ports and newer USB-C setups. A good specialist checks both hardware and firmware before changing the design.
The average hourly rate of freelancers in Germany who have used USB in their recent projects is 90 €, which corresponds to a daily rate of about 718 € based on an 8-hour working day.
Of the freelancers in Germany who have used USB in their recent projects, 92% hold at least a Bachelor's degree, 73% hold at least a Master's degree, and 19% hold a doctorate.
On average, freelancers in Germany who have used USB in their recent projects have 23 years of professional experience, with a single engagement typically lasting around 2.2 years.
The most common languages among freelancers in Germany who have used USB in their recent projects are English (100%), German (95%), and Spanish (16%).
The most common industries among freelancers in Germany who have used USB in their recent projects are Manufacturing (78%), Information Technology (68%), and Automotive (57%).
The most common business areas among freelancers in Germany who have used USB in their recent projects are Product Development (95%), Quality Assurance (86%), and Information Technology (84%).
Main locations of FRATCH Experts, who have recently used USB
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
