
UART Experts in Germany
matched in minutes from over 15,000 CVs with AIWork with specialists who configure asynchronous serial interfaces, build custom bare-metal peripheral drivers, and integrate hardware communication pipelines, precisely matched with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used UART
André G.
Last position:
Financial Reporting Consultant at Client anonymized (services sector)
Financial reporting as an MVP. Follow-up assignment.
- Reports on profit and loss, balance sheet and cash flow
- Budget and personnel metrics (FTE)
- Implementation as an MVP with a fixed scope
Muhammad J.
Last position:
Embedded Linux Intern – IoT Sensor Prototype Development at DHL
- Built a modular C++ 20 embedded Linux acquisition system on a Raspberry Pi, synchronizing IMU and dual-camera data streams to sub-millisecond accuracy.
- Integrated retro-reflective and contrast sensors to trigger acquisition and detect gaps between sorter rails.
- Implemented SPI & I2C sensor communication, GPIO interrupt handling with libgpiod, and CSV & JSON output.
- Designed a multi-threaded acquisition pipeline and an SPSC queue between acquisition and writer threads.
- Built a Python/HTML/CSS based web-server and validated the prototype in a DHL warehouse for defect detection.
- Documented software behavior, configuration, and results for maintainable handover and further development.
Furqan M.
Last position:
Epteck GmbH
- Contributing to embedded hardware development.
- Designing schematics and multilayer PCB layouts using Altium Designer.
- Applying signal and power integrity principles.
- Performing component selection, technical evaluation, footprint development, and design verification.
- Integrating and testing microcontroller peripherals and communication interfaces, including PC, SPI, UART, CAN, and USB, to support reliable system communication and hardware validation.
Valentin R.
Last position:
Freelance Hardware Development Engineer at Swarm Biotactics
PCB design with Altium, MCU Programming, Prototyping
S.r.k. C.
Last position:
Senior Software Engineer at STEPPS GmbH / Motherson Dr. Schneider
Project: Intelligent Light Communication Software — Audi
- Analysis and clarification of system requirements with the customer and translation into software architecture and design decisions
- Architecture and implementation of CAN FD and SPI communication on NXP S32K312
- Design and development of flash bootloader, flash driver, and boot manager for secure OTA-capable updates
- Configuration of the AUTOSAR BSW architecture (Dcm, Dem, NvM, BswM, Os, Mcu, Port, Com stack, Rtc) for portability and maintainability
- Design of the crypto stack (Csm, CryIf, Crypto) for secure flash and diagnostic data; integration of the NXP HSE core and wrapper layer
- Integration of customer-specific modules (Sfd, Ivd, Npm) into the Vector AUTOSAR stack
- Definition of the memory architecture: Memmap, CMake, and linker script configuration
- Leading board bring-up for the Audi light demo platform; implementation of diagnostic routines and identifiers
Abdelrahman H.
Last position:
Research Assistant (WHK), FPGA Development – BrassSense Project at HAW Hamburg / Prof. Peter Schulz
- Real-time tone detection on FPGA (~20 ms latency target) using a filter bank architecture with a fuzzy-logic decision stage, avoiding FFT due to its window-length/frequency-resolution tradeoff.
- Responsible for system integration and architecture.
Kacper K.
Last position:
Author
Seqnaut and Sycosm (WIP) – Embedded Audio DSP & Synthesis Platform
- Embedded audio DSP framework — synthesizers, effects, drum machines; modular audio graph
- Sequencing: PianoRoll, StepGrid, MasterClock; 8-voice polyphonic synth; CLI + OSC
- Transient Detector — dual-envelope adaptive threshold, guitar attack detection
- Hardware: Teensy 4.1, custom AFE design tapping BOSS GX-100; MIDI FX integration
Label: C++23, C, Python, CMake, FreeRTOS, Teensy 4.1 (ARM Cortex-M7), Teensy Audio (Stoffregen), DaisySP, I2S/SAI, OSC, MIDI
Giuseppe A.
Last position:
Embedded Software Development at Inheco
- AI Integration (LLM & RAG): Designed and built an internal intelligent RAG system (Retrieval-Augmented Generation) based on LLMs, n8n, and vector data to automatically analyze technical documents and error logs.
- Design & Implementation: Designed a robust RS-232/UART communication interface for an SBC-based embedded device used to control medical shaker systems.
- Architecture & Protocol Design: Built a highly maintainable software structure (OOP, SOLID) and defined resilient, hardware-level communication protocols, including multithreading and advanced error handling.
- Quality Assurance & DevOps: Automated testing with xUnit, ran integration tests directly on the hardware target, and maintained technical documentation to strict medical technology standards via Azure DevOps.
Label: C#, .NET, LLMs, RAG, n8n, RS-232, UART, Multithreading, async/await, xUnit, gRPC/protobuf, Blazor, MudBlazor, EF Core, Visual Studio 2026, Azure DevOps
Subodh K.
Last position:
Senior Software Engineer at EDAG Engineering GmbH
Project Title: Path Planning Module Development (Oct 2024 – Jun 2025)
Developed path planning module using C++14 and CMake
Implemented gRPC communication protocol between modules
Performed unit testing using Pytest framework and Python
Project Title: HMI Programming for Battery, Fuel Cell Electric Vehicle (Aug 2023 – Sep 2024)
Developed HMI software for BEV/FCEV using Ruby and Crystal for backend
Implemented frontend using Vue.js framework
Conducted bug fixes and simulator testing
Project Title: IFHOST CAN Bus Programming (Jan 2023 – Jul 2023)
Programmed CAN bus software using C and C++
Executed unit tests with Google Test framework
Performed integration testing using CAPL in Vector CANalyzer
Participated in onsite testing
Anuja C.
Last position:
Embedded Software Engineer at Digital Core Technology
- Designed and implemented embedded firmware in C/C++ for ARM-based microcontrollers and SoCs (STM32, NXP, Infineon)
- Worked across bare-metal, FreeRTOS, and Embedded Linux environments, contributing to BSP-level functionality, driver bring-up, and system integration
- Built, configured, and validated Embedded Linux systems using Yocto, including image build, boot validation, and runtime debugging
- Developed and executed unit, integration, and system-level tests, including HIL and SIL test scenarios on real hardware and simulated environments
- Created Python and Bash scripts to automate build, test execution, simulation runs, and reporting within CI/CD pipelines (Jenkins, GitLab CI)
- Designed test cases from software and system-level requirements, covering normal operation, edge cases, and failure scenarios
- Performed low-level debugging using JTAG/GDB, analyzing boot issues, timing problems, interrupts, and peripheral behavior
- Developed and validated communication interfaces including UART, SPI, I2C, CAN using logs and external measurement tools
- Used simulation and virtual test environments to validate software behavior prior to hardware availability
- Read and interpreted hardware schematics to understand signal routing, pin multiplexing, and peripheral connections
- Supported PCB design and review activities using Altium tool, assisting with component selection, pin mapping, and bring-up readiness
- Collaborated with cross-functional hardware, firmware, and system teams to clarify requirements, document assumptions, and improve overall test coverage
- Developed web interfaces using HTML, CSS, and JavaScript (ES6) and basic REST API development with Node.js
- Experience testing web applications and building UI automation frameworks using Selenium WebDriver
Kai W.
Last position:
biobedded systems GmbH
- Embedded software development for EMS safety boards in medical technology according to IEC 62304 / ISO 13485
- Technologies: C++, OpenCV, Python, Qt6, JTAG, UART, CMake, IEC 62304, ISO 13485
Alexander D.
Last position:
Systems Engineer at infoteam AG
- Further development and maintenance of data management software in the nuclear sector
- Processing and resolution of problem reports
- Bug fixing and defect remediation
- Performance optimization of legacy code
- Analysis and remediation of security vulnerabilities
- Specification and conceptual design of new features
- Modernization of legacy codebase to C++17
- Technologies & tools: C++, ClearCase, SQL, HTML, CSS, JavaScript, Git, Linux, Solaris, Shell-Script, VisualStudio
- Frontend – Smart Sensor Dashboard: development of a browser-based dashboard for real-time visualization of smart sensor data
- Technologies & tools: TypeScript, Angular, HTML, CSS, JavaScript, MQTT, VisualStudio
- Implementation of embedded safety software for a magnetic levitation elevator system
- Requirements engineering
- Documentation and implementation of safety software for the magnetic levitation elevator control system and the central management system
- Creation and execution of unit tests for all implemented modules
- Technologies & tools: C/C++, Jira, Bitbucket, Confluence, VectorCAST, MISRA-C, Lint, Doxygen, Git
Meenakumar V.
Last position:
Senior Embedded Technical Manager at IIT Madras Pravartak Technologies
- Led 14 member dev team and delivered postgresql database integration and performance optimization
- Delivered 8 K lines of C code with fewer defects (5 medium to low) in 8 months of development
- Integrate open source pgVector for AI application of the database for exact and nearest neighbor search
Maryam S.
Last position:
Hardware and Control Engineer at Technical University of Munich
- Developed a 6 kW AC-DC power converter for automotive applications.
- Selected and tested SiC MOSFETs, gate drivers, diodes, and high-voltage capacitors.
- Created schematics and designed multilayer PCBs in Altium Designer.
- Collaborated with software and mechanical teams for system integration.
- Developed an advanced control strategy for traction inverters.
- Implemented and tested control algorithms in MATLAB/Simulink.
- Conducted detailed efficiency, power factor, and common-mode current measurements.
Karl S.
Last position:
Software Consultant, Architect, and Developer at Forklift Truck Manufacturer
Consulting in all areas of software development such as architecture, inter- and intra-process communication, end-to-end validation
Monitoring and measuring resources such as runtime and memory usage
Specification of interface and implementation patterns as well as high-level and detailed specifications
Design and implementation of functional and safety software
Specification of unit tests and support of the integration and software tests in the HIL test department as part of software validation
Development of platform-independent control and regulation software for a fuel cell system (multi-processor 16-bit and multi-core 32-bit)
Development/concept design of state machines
Development/concept design of control algorithms
Development/concept design of inter-process safety communication
Development/concept design of basic software components for parameter, characteristic curve, and error management
Development of vehicle communication based on CAN
Development/concept design of commissioning, maintenance, and service interfaces via CAN and UDS diagnostics
Conducting validation and supporting external validation
Creating specifications for testing
Discover over 15,000 top freelancers
Statistics of experts using UART
Aggregated from the professional profiles of matched freelancers.
Experience
16 years

Position duration
2.1 years

Positions per freelancer
10

Top business areas
Product Development, Information Technology, Quality Assurance

Top industries
Information Technology, Manufacturing, Automotive

Certification focus areas
Information Technology, Product Development, Quality Assurance
Bachelor's degree or higher
100%
Master's degree or higher
89%
Doctorate
11%

Certifications per freelancer
2

Most common languages
English, German, Spanish

Speak two or more languages
100%
Based on our profile pool as of 19 Nov 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using UART
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 19 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
UART experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Information Technology (73%)
- Manufacturing (70%)
- Automotive (65%)
- Healthcare (35%)
- Education (28%)
- Aerospace and Defense (25%)
- Energy (25%)
- Telecommunication (20%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Hardware-Level Serial Communication
Universal Asynchronous Receiver-Transmitter interfaces provide point-to-point asynchronous serial communication between embedded microcontrollers and external peripherals. The protocol transmits data frame by frame without a shared clock line, relying on agreed baud rates, start and stop bits, and optional parity checking to ensure stream integrity across physical lines.
Core Engineering Capabilities
- Bare-metal peripheral driver creation on ARM Cortex-M, RISC-V, and AVR architectures
- Ring buffer memory design for interrupt-driven and direct memory access operations
- Physical transceiver integration for standard RS-232, RS-422, and industrial RS-485 networks
- Diagnostic command shell implementation and telemetry stream logging
Typical Project Applications
Engineering teams rely on serial communication for bootloader interfaces, host-to-module links, and direct board bring-up. The interface bridges microcontrollers with cellular modems, GNSS receivers, Bluetooth transceivers, and motor controllers. In Germany, industrial automation and automotive testing facilities depend heavily on reliable serial buses for long-run machinery diagnostics.
Diagnosis and Signal Quality
- Analyzing framing errors, buffer overruns, and noise using digital storage oscilloscopes
- Validating clock drift tolerances between communicating system components
- Establishing multi-drop bus contention management on RS-485 physical layers
- Stress-testing custom binary framing under heavy interrupt load conditions
When Projects Require External Specialists
Organizations bring in dedicated professionals during critical hardware bring-up phases or when experiencing intermittent frame dropping in high-throughput streams. Contract support proves crucial when retrofitting modern RTOS platforms to legacy machinery or optimizing DMA transfer routines to alleviate microcontroller core utilization during mission-critical tasks.
Attributes of Senior Practitioners
Experienced professionals write deterministic, reentrant C and C++ firmware without blocking delay routines. They isolate hardware timing defects using logic analyzers and design robust packetization mechanisms, including CRC checksums and state-machine parsers, protecting embedded devices against corrupted frames and line reflections.
Frequently asked questions
Not sure where to start with UART? These answers cover the essentials.
A UART peripheral facilitates low-overhead asynchronous data exchange between microcontrollers and peripheral sensors or wireless modems. It also serves as the fundamental transport layer for interactive debug consoles, firmware flash bootloaders, and command-line interfaces during hardware development.
Unlike synchronous buses, universal asynchronous receiver-transmitter links omit an explicit clock line and operate over only two signal wires for full-duplex transmission. While SPI and I2C achieve faster master-slave transfers on a single PCB, serial communication excels across longer physical distances when coupled with transceivers.
Professionals working with UART need strong proficiency in embedded C or modern C++, deep familiarity with RTOS queue mechanics, and mastery of DMA controllers. Hands-on expertise with logic analyzers, oscilloscopes, and hardware circuit schematics is equally essential for signal verification.
Much of the low-level driver architecture and state-machine firmware for UART can be constructed in remote environments using simulation and remote hardware test benches. However, initial board bring-up, signal integrity testing, and EMC compliance often require periodic on-site collaboration at client labs in Germany.
Specialists address dropped bytes in a UART pipeline by swapping interrupt-per-byte handling for direct memory access coupled with circular ring buffers. They also implement hardware flow control using RTS and CTS lines to pause data transmission before memory buffers saturate.
Manufacturing equipment, rail transportation, medical technology, and automotive telemetry across Germany rely on UART interfaces linked to differential physical transceivers. These robust standards provide resilient long-distance signaling inside electrically noisy factory environments.
Look for experience writing non-blocking peripheral drivers, custom packet framing protocols with error checking, and circular buffer management. A capable specialist discussing asynchronous serial interfaces will readily explain strategies for mitigating clock jitter and handling framing errors under heavy CPU load.
A specialist delivering UART integration provides modular driver source code, register configuration headers, and automated test benches. Deliverables should also include bus timing captures, transceiver circuit layout notes, and protocol specifications documenting packet structures and error codes.
The average hourly rate of freelancers in Germany who have used UART in their recent projects is 85 €, which corresponds to a daily rate of about 684 € based on an 8-hour working day.
Of the freelancers in Germany who have used UART in their recent projects, 100% hold at least a Bachelor's degree, 89% hold at least a Master's degree, and 11% hold a doctorate.
On average, freelancers in Germany who have used UART in their recent projects have 16 years of professional experience, with a single engagement typically lasting around 2.1 years.
The most common languages among freelancers in Germany who have used UART in their recent projects are English (100%), German (95%), and Spanish (15%).
The most common industries among freelancers in Germany who have used UART in their recent projects are Information Technology (73%), Manufacturing (70%), and Automotive (65%).
The most common business areas among freelancers in Germany who have used UART in their recent projects are Product Development (100%), Information Technology (88%), and Quality Assurance (88%).
Main locations of FRATCH Experts, who have recently used UART
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!

Berlin
Munich