Lauterbach TRACE32 Experts in Munich
matched in minutes for reliable embedded systems workHire experts who debug multicore embedded systems, configure JTAG and SWD trace workflows, and support safety-critical firmware validation. FRATCH connects you with vetted, available freelancers through fast, precise AI matching.
Meet FRATCH Experts in Munich, who have recently used Lauterbach TRACE32
Jonathan M.
Last position:
On-Site Coordinator at Freelance
- Customer interface and relationship management
- Requirements management and work coordination
- Technical and functional support focusing on automotive Ethernet
Subodh K.
Last position:
Senior Software Engineer at EDAG Engineering GmbH
Project Title: Path Planning Module Development (Oct 2024 – Jun 2025)
Developed path planning module using C++14 and CMake
Implemented gRPC communication protocol between modules
Performed unit testing using Pytest framework and Python
Project Title: HMI Programming for Battery, Fuel Cell Electric Vehicle (Aug 2023 – Sep 2024)
Developed HMI software for BEV/FCEV using Ruby and Crystal for backend
Implemented frontend using Vue.js framework
Conducted bug fixes and simulator testing
Project Title: IFHOST CAN Bus Programming (Jan 2023 – Jul 2023)
Programmed CAN bus software using C and C++
Executed unit tests with Google Test framework
Performed integration testing using CAPL in Vector CANalyzer
Participated in onsite testing
Denis V.
Last position:
AUTOSAR Software Engineer at Pioneer R&D Europe
Successfully integrated the Vector Flash Bootloader (FBL) for both NXP and TI SoCs within the Ford FNV3 and FNV4 audio amplifier projects.
Achieved complete bootloader bring-up and ensured reliable operation, enabling secure and efficient firmware update capabilities.
Developed a valid approach for running the Vector FBL entirely from RAM on the TI SoC, addressing unique architectural and memory handling challenges.
Debugged and optimized NXP MCAL and TI MCAL configurations to ensure proper low-level hardware initialization.
Managed specific constraints of DDR-only bootloader execution on TI SoC, including memory mapping and execution flow.
Tools: Vector DaVinci Configurator, Vector CANoe
Languages: C, Python
Standards: AUTOSAR
Ould Aly I.
Last position:
Functional Safety Assessor at VW
- Pre-assessments and review of functional safety status for ADAS ECUs and body controller components
- Conduct functional safety audits
- Review the functional safety status of the E3 1.2 in a pre-assessment
- Document interviews
- Document findings and generate internal reports
Methods:
- ISO26262
- Automotive SPICE Level 2, 3
- Agile methods, SAFe
Tools:
- DOORS
- Enterprise Architect
- JIRA & Confluence
- IQ-FMEA
- Isograph
András B.
Last position:
Test Equipment Developer at Minebea Access Solutions
- Tested passenger car opening handle at system level integrating hardware, software and mechanics
- Built and provided complete test equipment for system testers using Arduino boards, Saleae Logic analyser, oscilloscope, multimeter, RLC meter, programmable power supplies and function generators
- Developed system testing concepts and constructed manual system test bench
- Supported system testers with hardware and software tools
- Products: BMW XNF, Rolls Royce, Audi eRing, JLR (Jaguar-Land-Rover)
Madhava N.
Last position:
Function Developer ADAS at Continental Automotive GmbH through Ferchau GmbH
- Project: Sensor fusion application for traffic participant detection
- Software frameworks: C++ (11,14), Python, Visual Studio, MTS, Qt, GitHub, Jenkins, JIRA, Confluence, Conan, CAN, RTOS, DOORS, CMake
- Refactored and adapted sensor fusion algorithms by processing sensor data (camera and radar) for ACC and EBA as per requirements
- Handled system test issue reports in JIRA
- Tuned Kalman filters and introduced new features to enhance tracking
- Adapted architecture, detailed design (UML) and simulation tool (Qt)
- Conducted unit testing, code reviews and static code analysis in compliance with MISRA standards
- Conducted regression testing to validate software, involved in software releases (CI/CD), KPI evaluation by testing NCAP scenarios
- Flashed ADAS software to target vehicles, used UDS protocol and OBD-II tools for diagnostics and verification
Aydın A.
Last position:
Freelancer Virtual Defect Manager - ECUs at Cariad SE
- Coordination, planning and reporting of base software bugs between software/hardware supplier, internal departments and functional owners
Discover over 15,000 top freelancers
Statistics of experts using Lauterbach TRACE32
Aggregated from the professional profiles of matched freelancers.
Experience
20 years
Position duration
1.9 years
Positions per freelancer
11
Top business areas
Product Development, Quality Assurance, Information Technology
Top industries
Automotive, Manufacturing, Aerospace and Defense
Certification focus areas
Quality Assurance, Human Resources, Logistics
Bachelor's degree or higher
100%
Master's degree or higher
100%
Certifications per freelancer
1
Most common languages
German, English, French
Speak two or more languages
100%
Based on our profile pool as of 19 Sep 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Munich are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Munich using Lauterbach TRACE32
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 19 Sep 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Lauterbach TRACE32 experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Automotive (100%)
- Manufacturing (71%)
- Aerospace and Defense (43%)
- Telecommunication (43%)
- Information Technology (29%)
- Construction (14%)
- Education (14%)
- Energy (14%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
What TRACE32 does
Lauterbach TRACE32 is a hardware-assisted development and debug environment for embedded systems. It connects to processor targets through JTAG, SWD and trace interfaces, helping teams inspect execution, memory, registers and real-time behavior. It is used across automotive, industrial, aerospace, medical and telecommunications products.
Core capabilities
TRACE32 combines source-level debugging with trace analysis, system configuration and target control. Experts use it to investigate boot failures, timing faults, multicore interactions and low-level software defects without relying only on application logs. Its hardware probes and software tools support work from early bring-up through validation and field diagnosis.
Ecosystem and tooling
The environment covers many processor families and integrates with common embedded toolchains, operating systems and build workflows. Relevant skills include JTAG and SWD configuration, CoreSight trace, ETM or Nexus analysis, RTOS debugging, ELF and DWARF inspection, scripting with PRACTICE, and cooperation with compilers, debuggers and CI processes.
Typical project work
- Bring up a new board and verify processor, memory and peripheral access
- Trace multicore firmware to isolate race conditions and timing faults
- Configure probes, trace capture and reusable PRACTICE automation
- Validate bootloaders, RTOS behavior and safety-related software
- Document repeatable debug and diagnosis procedures for internal teams
When specialists help
Companies bring in freelance TRACE32 specialists when an unfamiliar target, urgent defect or complex trace setup is slowing a release. They can support on-site lab work in Munich or collaborate remotely when hardware access, logs and controlled target sessions are available. German and English communication may both matter in local embedded teams.
What strong experts bring
Strong professionals understand both the TRACE32 interface and the processor architecture beneath it. They form testable hypotheses, select the right trace depth, preserve reproducible evidence and explain findings clearly to firmware, hardware and validation teams. They also know when a fault belongs in the target hardware, build configuration, operating system or application code.
Frequently asked questions
Need clarity? These are the questions we hear most often about Lauterbach TRACE32.
Lauterbach TRACE32 is used to debug and trace embedded processors, firmware and real-time systems. Teams use it for board bring-up, boot analysis, multicore debugging, memory inspection, performance investigation and safety-related validation.
TRACE32 provides deeper hardware-assisted access, broad processor support and advanced trace capabilities than many standard IDE debuggers. An IDE debugger may be sufficient for routine source-level work, while TRACE32 is often chosen for early hardware bring-up, multicore timing issues and faults that disappear under normal debugging.
A strong Lauterbach TRACE32 specialist usually understands processor architecture, JTAG or SWD, bootloaders, RTOS behavior and embedded build artifacts. Knowledge of CoreSight, ETM, Nexus, ELF, DWARF and PRACTICE scripting is valuable when investigations require trace automation or detailed execution analysis.
The right level depends on the target and the failure mode. TRACE32 work on a familiar single-core target may need focused debugging ability, while new silicon, multicore trace, safety evidence or custom automation calls for a professional who has handled comparable hardware and tool configurations.
Lauterbach TRACE32 projects can often be handled remotely when the specialist has secure access to logs, build artifacts, trace files and a controllable target setup. On-site collaboration in Munich is more useful for board bring-up, probe wiring, intermittent hardware faults and lab equipment that cannot be shared remotely.
A clear target description, processor information, probe details, software versions, reproduction steps and available symbols give a TRACE32 specialist a productive starting point. Access rules, hardware availability and the expected diagnostic deliverable should also be agreed before work begins.
Ask how the professional separates hardware, firmware, build and timing hypotheses, and how findings will be reproduced. Good Lauterbach TRACE32 work produces trace evidence, precise conclusions, documented settings and practical next steps rather than only a temporary workaround.
TRACE32 is widely used in embedded programs where teams need detailed visibility into processor execution and controlled validation evidence. Automotive, industrial, aerospace and medical projects may use it alongside safety processes, but the specialist must still follow the project's tool qualification, access control and documentation requirements.
The average hourly rate of freelancers in Munich, Germany who have used Lauterbach TRACE32 in their recent projects is 82 €, which corresponds to a daily rate of about 654 € based on an 8-hour working day.
Of the freelancers in Munich, Germany who have used Lauterbach TRACE32 in their recent projects, 100% hold at least a Bachelor's degree and 100% hold at least a Master's degree.
On average, freelancers in Munich, Germany who have used Lauterbach TRACE32 in their recent projects have 20 years of professional experience, with a single engagement typically lasting around 1.9 years.
The most common languages among freelancers in Munich, Germany who have used Lauterbach TRACE32 in their recent projects are German (100%), English (86%), and French (29%).
The most common industries among freelancers in Munich, Germany who have used Lauterbach TRACE32 in their recent projects are Automotive (100%), Manufacturing (71%), and Aerospace and Defense (43%).
The most common business areas among freelancers in Munich, Germany who have used Lauterbach TRACE32 in their recent projects are Product Development (100%), Quality Assurance (100%), and Information Technology (86%).
Main locations of FRATCH Experts, who have recently used Lauterbach TRACE32
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Countries:
Berlin Hamburg 
Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
