Skip to main content
🇩🇪GDPR-compliant
Find experienced

AutoCAD Experts in Dortmund

for precise designs, matched in minutes with vetted freelance specialists

Hire experts who create technical drawings, 3D models and production-ready documentation with AutoCAD, Autodesk tools and CAD standards. FRATCH connects you quickly with precise, vetted and available freelancers for remote or on-site work.

Meet FRATCH Experts in Dortmund, who have recently used AutoCAD

Verified expert

Mohamad A.

View profile

Network Security Systems Engineer

Bochum
Mohamad A.

Last position:

Systems Engineer for Network Security at Bechtle AG

  • SD-WAN solution by Aruba – Swiss energy company (330 sites): design and implementation of an SD-WAN branch solution with Aruba 9004 gateways, encrypted overlay, policy-based routing, WAN load balancing, and centralized management via Aruba Central.
  • LAN/WLAN & security – schools in Germany (9 sites): deployment of Aruba switches & AP-505, FortiGate 80F firewalls; setup of Checkmk monitoring, incident and change management, and secure admin access (BeyondTrust).
  • Multi-site security – energy billing company (20 sites): deployment of a complete Fortinet solution (FortiGate HA cluster, FortiSwitch PoE, FortiAP), IPsec remote-access VPN via FortiClient, centralized management via FortiCloud, IntraID authentication, operations and incident management.
  • Data center migration – German client: migration of data center switches (Mellanox), firewall cluster, and OfficeConnect switches to a new data center; securing configurations, implementing HA designs, testing, monitoring, and coordinated change and incident processes. Setup of two new 6300 M VSX clustered switches.
  • Data center security – university hospital: implementation of a high-availability FortiGate 400F firewall cluster across three data centers; security policy design, operational support, and change/incident management.
  • Enterprise campus & network access control – manufacturing company in Germany: introduction of Aruba ClearPass NAC, setup of a VSX-based switching architecture, secure WLAN access with MPSK, and integration into existing networks.
  • EU client (Germany & Poland) – Sophos firewalls: operations, incident and change management of Sophos firewalls including IPsec VPN; troubleshooting and ongoing optimization of security configurations.
  • Network modernization – pharmacy client in Germany: design and rollout of core and access switching (Mellanox, Aruba Instant On), migration from Sophos to Fortinet firewalls, network segmentation, and security hardening.
Verified expert

Bertram M.

View profile

Lecturer for FEM/Simulation Seminars

Hagen
Bertram M.

Last position:

Art of Engineering GmbH

  • Assembly fixture for a steering gear
  • Design of food filling devices
  • Software: Dassault CATIA V5
Verified expert

Karzan M.

View profile

PhD Researcher – HVAC Fault Diagnosis

Pulheim
Karzan M.

Last position:

PhD Researcher – HVAC Fault Diagnosis at Eindhoven University of Technology

  • Conducting research on HVAC fault detection and diagnosis using Diagnostic Bayesian Networks.
  • Developing diagnostic frameworks that combine expert knowledge with data analytics to improve system reliability.
  • Integrating occupant feedback as a symptom input for enhanced fault diagnosis.
  • Collaborating with industrial partners on real-world system validation.
  • Publishing research in peer-reviewed journals (e.g., Energy and Buildings) and presenting at international conferences.
Verified expert

Ahmed S.

View profile

Electrical Hardware Designer

Dortmund
Ahmed S.

Last position:

Electrical Hardware Designer at Dematic GmbH

  • Planning and design of hardware components for automated storage and retrieval machines
  • Creation of design drawings and filing of bills of materials in SAP
  • Maintenance and modification of old and new circuit diagrams in EPLAN P8
  • Maintenance of master data through to the creation of macros for components and assemblies
  • Technical coordination with suppliers, customers and other departments
  • Support in preparing quotations and quotation calculations
Verified expert

Dane C.

View profile

Mechanical Design Engineer

Sprockhövel
Dane C.

Last position:

Mechanical Design Engineer at SUSS MicroTec

  • Independent work as a mechanical design engineer.
  • Design work in SolidWorks 2022.
  • Creation of drawings for assemblies and individual parts, taking surface finish, machining, and material into account.
  • 3D design and new development of modules for manufacturing computer chips.
  • 3D design and implementation of concepts in close coordination with the design team.
  • Design of an extraction system for solvents (acids and alkalis), focusing on cost reduction and automatic retention.
  • Use of 3D sketches to design hose routing.
  • Reading pneumatic diagrams and implementing them in CAD.
  • Development of a gas component plate for supplying four lines, including the integration of filters and design simplification.
  • Prototype construction and new development.
  • Import and further processing of STEP files.
  • 3D design of E-cabinet equipment based on templates.
  • Use of the SAP and ECTR PLM systems for storing, copying, linking, attaching data, changing statuses, and versioning.
  • Creation of work lists, maintenance of material master data, and change numbers.
  • Structure maintenance and BOM export.
  • Work with transactions for changes, documents, and material masters.
  • Creation of layouts for complete systems and individual modules for internal coordination.
Verified expert

Rolf P.

View profile

IT Consultant and Interim Manager

Unna
Rolf P.

Last position:

IT Consultant and Interim Manager at Self-employed

  • Interim CIO at companies in the printing industry (2020/2021)
  • Interim CIO and project manager at an automotive components plant (2018/2019/2020)
  • Interim CIO at a mechanical engineering company (2016/2017)
  • Interim CIO/ERP project manager at a mechanical engineering company (2015/2016)
  • Project management of an international SAP-SCM implementation at a pharmaceutical wholesaler and retailer (2014/2015)
  • Establishing efficient SAP project management at a large German machine manufacturer (2013)
  • Supporting a large building materials manufacturer in setting up an international IT organization/governance (2013)
  • Optimizing Microsoft contract frameworks for a ThyssenKrupp subsidiary (2013)
  • Redesigning the IT infrastructure of a mid-sized automotive supplier (2012)
  • Advising a large Austrian machine manufacturer on setting up an IT shared service center in India (2012)
  • Redesigning the IT environment and process optimization at a large law firm in Dortmund (2012)

Discover over 15,000 top freelancers

Statistics of experts using AutoCAD

Aggregated from the professional profiles of matched freelancers.

Experience

18 years (Germany: 22 years)

AutoCAD experts in Dortmund have 18 years of professional experience on average. It is 4 years less than in Germany, where the average stands at 22 years.

Position duration

3.8 years (Germany: 5.5 years)

AutoCAD experts in Dortmund stay in a single position for 3.8 years on average. It is 1.7 years less than in Germany, where the average stands at 5.5 years.

Positions per freelancer

9 (Germany: 12)

AutoCAD experts in Dortmund have completed 9 positions on average over the course of their careers. It is 3 fewer than in Germany, where the average stands at 12.

Top business areas

Product Development, Operations, Procurement

AutoCAD experts in Dortmund have gathered most of their hands-on project experience in Product Development, Operations, and Procurement.

Top industries

Energy, Manufacturing, Automotive

AutoCAD experts in Dortmund are most in demand in Energy, Manufacturing, and Automotive.

Certification focus areas

Logistics, Product Development, Quality Assurance

AutoCAD experts in Dortmund earn their certifications most often in Logistics, Product Development, and Quality Assurance.

Bachelor's degree or higher

100% (Germany: 84%)

100% of AutoCAD experts in Dortmund hold at least a Bachelor's degree. It is 16% higher than in Germany, where the rate stands at 84%.

Master's degree or higher

67% (Germany: 58%)

67% of AutoCAD experts in Dortmund hold at least a Master's degree. It is 9% higher than in Germany, where the rate stands at 58%.

Doctorate

17% (Germany: 5%)

17% of AutoCAD experts in Dortmund have a doctorate (PhD). It is 12% higher than in Germany, where the rate stands at 5%.

Certifications per freelancer

3

AutoCAD experts in Dortmund hold 3 professional certifications on average.

Most common languages

English, German, Arabic

AutoCAD experts in Dortmund most often speak English, German, and Arabic.

Speak two or more languages

86% (Germany: 96%)

86% of AutoCAD experts in Dortmund speak two or more languages. It is 10% lower than in Germany, where the rate stands at 96%.

Based on our profile pool as of 18 Nov 2026.

Daily rate distribution

0% 25% 50% 75% 100%
40% of AutoCAD experts in Dortmund charge less than €640 per day.
20% of AutoCAD experts in Dortmund charge between €640 and €680 per day.
20% of AutoCAD experts in Dortmund charge between €680 and €720 per day.
20% of AutoCAD experts in Dortmund charge €760 or more per day.
<€640 €640-​680 €680-​720 €760+

The chart shows how the daily rates of experts in this technology in Dortmund are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.

Discover detailed AutoCAD rate benchmarks:

Explore rate insights

Average rates of experts in Dortmund using AutoCAD

Rates are based on recent contracts and do not include FRATCH margin.

800
600
400
200
Rate comparison chart
Daily rate avg. 641 €
Germany avg. 708 €

The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.

800
600
400
200
Rate comparison chart
Median rate 640 €
Germany median 720 €

The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.

Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.

AutoCAD experts industry focus

See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.

  • Energy (71%)
  • Manufacturing (71%)
  • Automotive (57%)
  • Construction (57%)
  • Transportation (57%)
  • Food and Beverage (43%)
  • Professional Services (43%)
  • Information Technology (29%)

Please note that freelancers can work across multiple industries, so percentages overlap.

About the technology

What AutoCAD does

AutoCAD is Autodesk’s computer-aided design software for creating precise two-dimensional drawings and three-dimensional models. Companies use it to document layouts, components, buildings, infrastructure and production details. DWG is its central drawing format, supported by a broad CAD ecosystem.

Typical deliverables

AutoCAD specialists turn specifications, surveys and sketches into clear files that teams can review, revise and issue for construction or production.

  • Floor plans, elevations and sections
  • Mechanical parts, assemblies and fabrication drawings
  • Electrical, piping and HVAC layouts
  • Site plans, utility maps and as-built documentation

Tools and adjacent skills

Strong work with AutoCAD includes more than drawing commands. Professionals understand layers, blocks, external references, annotations, plotting standards and reusable templates. Depending on the assignment, they also work with Autodesk products such as Revit, Civil 3D, Inventor or Fusion, plus PDF markups, GIS data and document-control systems.

When companies hire specialists

Freelance expertise helps when internal teams face a drawing backlog, a plant or building survey, a new production line, or a demanding revision cycle. It is also useful for migrating legacy DWG files, standardising templates and preparing documentation for handover.

  • Existing drawings need cleaning or conversion
  • Design changes must be reflected across linked files
  • A project requires consistent CAD standards
  • Capacity is needed for a defined delivery phase

What quality looks like

A reliable AutoCAD professional starts by clarifying units, coordinate systems, tolerances, naming rules and the expected output. They keep layers and references organised, use meaningful file structures and check dimensions before issuing drawings. Clean plots, accurate metadata and controlled revisions matter as much as visual detail.

For Dortmund-based projects, teams can combine remote production with on-site surveys, coordination meetings or reviews where physical conditions matter. German documentation standards and clear technical communication may also be important for local construction, manufacturing and infrastructure work.

Choosing the right fit

Review comparable drawing sets rather than relying only on software labels. Ask how the specialist handles redlines, version control, missing source data and review comments. A short sample task can reveal precision, layout discipline and how well the person follows an existing company standard.

Clarify the required AutoCAD release, file formats, reference files, plot styles and approval process before work begins. The best match combines relevant domain knowledge with dependable communication and the ability to deliver files that others can edit, inspect and reuse.

Published on:
FRATCH GPT

FRATCH GPT delivers freelancer proposals with clear reasoning and transparent pricing in minutes, helping your hiring department quickly and compliantly find the best talent.

Give it a try:

Try FRATCH GPT

Frequently asked questions

What clients ask us most about AutoCAD — answered in short.

AutoCAD is used to create, edit and document precise technical drawings and models. Common work includes architectural plans, mechanical details, electrical layouts, civil site plans and as-built documentation.

AutoCAD is a flexible general-purpose CAD tool, while Revit focuses on building information modelling, Civil 3D on civil infrastructure and Inventor on mechanical product design. The right choice depends on whether the project needs open-ended drafting, discipline-specific models or parametric design data.

A strong AutoCAD specialist may also understand BIM coordination, surveying, manufacturing documentation, GIS data or construction standards. Useful supporting skills include DWG management, PDF review, layer standards, plotting, 3D visualisation and document control.

The required AutoCAD experience depends on the deliverable and the cost of errors. Simple updates may suit a drafting-focused professional, while complex plant layouts, fabrication details or coordinated building documentation call for proven domain knowledge and independent quality checks.

AutoCAD work is often suitable for remote collaboration when source files, standards and review procedures are organised. On-site visits may still be needed for measurements, existing-condition surveys or coordination with teams in Dortmund and nearby facilities.

For AutoCAD work, provide reference drawings, required units, layer and naming standards, plot styles, title blocks and a clear revision process. Explain the intended output, approval criteria and any links to Revit, Civil 3D, Inventor or other systems.

Ask an AutoCAD professional to show relevant, anonymised drawing samples and explain how they manage references, revisions and checks. A small review task can expose problems with scale, layers, dimensions, plotting and adherence to your standards.

Autodesk AutoCAD remains widely used for drafting and documentation, but many specialists combine it with discipline-specific Autodesk products or other CAD systems. Confirm the required release, file compatibility and exchange process before assigning the project.

The average hourly rate of freelancers in Dortmund, Germany who have used AutoCAD in their recent projects is 80 €, which corresponds to a daily rate of about 641 € based on an 8-hour working day.

Of the freelancers in Dortmund, Germany who have used AutoCAD in their recent projects, 100% hold at least a Bachelor's degree, 67% hold at least a Master's degree, and 17% hold a doctorate.

On average, freelancers in Dortmund, Germany who have used AutoCAD in their recent projects have 18 years of professional experience, with a single engagement typically lasting around 3.8 years.

The most common languages among freelancers in Dortmund, Germany who have used AutoCAD in their recent projects are English (100%), German (86%), and Arabic (29%).

The most common industries among freelancers in Dortmund, Germany who have used AutoCAD in their recent projects are Energy (71%), Manufacturing (71%), and Automotive (57%).

The most common business areas among freelancers in Dortmund, Germany who have used AutoCAD in their recent projects are Product Development (86%), Operations (71%), and Procurement (57%).

Main locations of FRATCH Experts, who have recently used AutoCAD

Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.

Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg

Request a free demo

Get in touch with the FRATCH team and we will get back to you within 4 hours.

Contact form

Would you rather directly get in touch?
We always have the time for a call or email!

FRATCH CEO avatar

Philipp Thomaschewski

FRATCH CEO

LinkedInFRATCH