3D Printing Experts in Germany
matched in minutes from over 15,000 CVsHire experts who turn digital models into functional prototypes, tooling and end-use parts across polymers, resins and metals. Get precise AI matching with vetted, available freelancers for design, production and process improvement.
Meet FRATCH Experts in Germany, who have recently used 3D Printing
Gregor P.
Last position:
Engineering Data Management Project Manager
Technical and commercial risk assessment for an investment project in the hardware sector (scaling potential, liability risks, operational processes) Process consulting for two SMEs in the engineering environment, with a focus on workflow digitization and PLM
Thomas P.
Last position:
Lifting Device Designer at TP-Produktdesign
- Design of a 3-point quick coupling for tractor lifting attachment
- Development of a holder for a drawbar flange device
Simon K.
Last position:
Transaction Lead buy-side (interim) – time-critical distressed due diligence at Corporate acquirer (confidential), via SkyBridge Solutions GmbH
Project lead for a corporate acquirer in a time-critical buy-side distress situation (target out of insolvency).
- Led the client's internal and external due diligence teams across 10 workstreams; overall coordination and negotiation support for the client's Head of M&A
- AI-supported delivery: VDR preparation, report drafting for selected DD teams, Q&A management, support for target management
- Due diligence completed in under three weeks and within the confidential DD budget
- Delivered the decision basis for the board: the transaction was stopped – the client considered the process a success
Philipp S.
Last position:
Self-employed consultant at Schlegtendal solutions
- Business analyst/ project manager/ trainer/ entrepreneur
- Consulting companies in the areas of business analysis, process management, agile project management and organizational development.
- Management of digitalization and transformation projects (LichtBlick SE, E.ON, Co.met, Stromnetz Hamburg)
- Introduction of agile ways of working and development of efficient process and PMO structures
- Successful implementation of a product launch (Idea-to-Market, > 100 Epics over 3 years)
- Creation of requirements specifications, process models and IT concepts
- Coaching and training of specialists and managers (Jira/Confluence, purchasing)
- Development of my own product “TriggaBuddy” – concept, CAD design, 3D printing, utility model
- Consulting assignments: E.ON, LichtBlick SE, Co.Met, Stromnetz Hamburg GmbH
Roland S.
Last position:
Aerosol Generator Technology – Industrialization Partnerships
Aerosol Generator Technology – Industrialization Partnerships
Engaged by a former technology partner to identify and approach potential partners for further industrialization and commercialization of its vibrating membrane nebulizer aerosol generator technology.
Tamás E.
Last position:
Senior Software Developer / Tech Lead at NDA (defense / OSINT)
- Designing the audit logging framework
- Implementing APIs for developers to integrate in their codebase
- Implementing ingestion pipeline, database query layer and UI for browsing the audit events
- Improving stability and reliability of the backend system
Maximilian H.
Last position:
Project Management - Formation & Aging at Cellforce Group GmbH
- Development and optimization of formation & aging processes for lithium-ion cells
- Coordination of technical requirements with production, quality, planning and suppliers
- Preparation of project plans and coordination of technical milestones
- Analysis of process and trend data to derive improvement measures
- Management of international machine suppliers including FAT/SAT
- Technical reporting to internal stakeholders and management
- Preparation of technical specifications & support of tender processes
Richard H.
Last position:
Interim Manager AI Strategy and Business Development at Max-Planck-Innovation GmbH
Assignment:
Supporting the AI startup MachOptima during its spin-off phase in the area of industrial process optimization. Strategic development of business development, acquisition of initial pilot customers, and development of market positioning.
Responsibilities:
- Evaluating and refining the service offering for industrial customers.
- Developing and implementing an acquisition strategy for pilot projects.
- Managing key accounts, supporting customer discussions, and shaping the strategic roadmap.
- Establishing sales processes and CRM structures.
Results:
- Successful placement with initial pilot customers.
- Establishment of a structured sales architecture and support for several customer projects.
- Clearer market positioning through a refined value proposition.
- Sustainable strengthening of the founding team’s internal understanding of strategy and sales.
Domenic V.
Last position:
Founder at VOS Ventures Tech UG
Working as independent / interim / fractional CTO / engineering director, technical leader, builder, coach. Select achievements:
- Fractional CTO for a music-tech startup. Helped unlock further funding by providing the technical strategy and plan behind their vision and pitch deck, then executed it: vision to a working beta, 0 to 1, on time and on budget against that plan.
- AI automation for a compliance business. An annual research process — days of a person working through spreadsheets and checking websites by hand, so costly it had been abandoned for years — now runs automatically every month and takes about an hour to review. Stale or missing data became current data, twelve times a year.
- An AI development autopilot. Agents take an approved ticket, implement test-first, verify against a running system and open a pull request. An AI committee reviews on various categories and provides risk assessments based on my specs. Nothing merges without a human.
- Coaching and sparring for engineering leaders. Developing engineering managers was most of my job as a director; I now do it one to one.
Florian W.
Last position:
Managing Director and Independent Engineering Service Provider at Wirth Engineering GmbH
- Engineering and consulting in the areas of simulation, manufacturing technology, and machine and plant engineering
Philipp L.
Last position:
Lead Strategy & Concept at Siemens via Experience One
Concept development of an ML-/AI-supported contact solution for the central handling of all digital and global customer inquiries.
- Strategic development of an ML-/AI-supported contact solution to qualify, prioritize, and automate all digital and global inquiries at Siemens.
- Structuring an end-to-end process from inquiry intake to operational handling.
- Automation of level 0/1 inquiries, resulting in a reduction of 85% of all contact requests to be handled.
- Technical coordination for the iterative rollout and sustainable scalability of the solution.
- Consulting and alignment of key stakeholders across business units and regions.
- Conceptual development of additional measures to relieve support and enable more efficient handling.
Björn K.
Last position:
Development Engineer Control Concepts at TU Chemnitz
- Development and validation of control concepts for grid stabilization with MATLAB/Simulink.
- Modeling of converters (VISMA), grids, and loads to study frequency and phase behavior during load steps.
- Analysis of the influence of inertia, damping, and controller parameters on stability, power output, and ROCOF.
- Development of adaptive control strategies to improve synchronization and dynamic grid support.
- Creation of automated simulation and evaluation tools to assess different scenarios and parameters.
Diana Z.
Last position:
Graphic, product & industrial design at Selene Studio
Projects and client work from first enquiry to handover · Munich, Berlin, Rome.
- 2025 Olympia Equestrian Centre Munich-Riem: site map, brochure and signage.
- SELENE own hairpin label: product design, brand, packaging, shop.
- 2026 Fantasy Farm: self-published children's colouring book.
Mendel H.
Last position:
Lecturer in 3D Animation, Graphic Design and Storyboarding at Macromedia Hochschule Berlin
- Semesters 1 to 3: 3D modelling, rendering and animation with Cinema4D, Blender, After Effects
- Semesters 1 to 3: Design and graphic design fundamentals, layout, typography, Adobe Suite
- Semesters 6 to 8: Storyboarding and prototyping, cross-media project work
- Workshops on 3D printing, including theory and practice, for the Communication Design and Fashion degree programs
Reuf K.
Last position:
Self-employed Mechanical Engineering Development Engineer, Head of Design and Development of the Pipedeck at Herrenknecht Vertikal GmbH
- Development and design of a new oil drilling machine for the Beatrice oil drilling platform, Scotland
- Concept development of the Pipe-Overdeck work platform with crane, total load 200 tonnes
- Static FEM calculation and CFD flow calculation for the safe drainage of oil-contaminated wastewater
- Planning, calculation and design of the concept
- Management of 5 designers
- CAD: CREO, Model Manager, SAP
- FKM, VDI 2230 and Euro Code 3
Discover over 15,000 top freelancers
Statistics of experts using 3D Printing
Aggregated from the professional profiles of matched freelancers.
Experience
20 years
Position duration
2.5 years
Positions per freelancer
13
Top business areas
Product Development, Information Technology, Research and Development
Top industries
Manufacturing, Automotive, Information Technology
Certification focus areas
Quality Assurance, Product Development, Operations
Bachelor's degree or higher
85%
Master's degree or higher
71%
Doctorate
18%
Certifications per freelancer
2
Most common languages
German, English, French
Speak two or more languages
96%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using 3D Printing
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
3D Printing experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (91%)
- Automotive (55%)
- Information Technology (51%)
- Professional Services (39%)
- Education (38%)
- Energy (34%)
- Healthcare (34%)
- Aerospace and Defense (20%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
What 3D Printing Does
3D printing, also called additive manufacturing or AM, creates physical objects layer by layer from a digital model. It supports rapid prototyping, custom components, replacement parts, tooling and small-series production. The right process depends on material, geometry, surface requirements and expected production volume.
Processes and Materials
The ecosystem includes FDM and FFF for accessible thermoplastic parts, SLA and DLP for detailed resin models, SLS for durable polymer components, and selective laser melting for metal production. Strong specialists understand build orientation, supports, shrinkage, warping, curing, sintering and post-processing. They select materials such as PLA, ABS, nylon, resin and metal alloys for the intended use.
Typical Deliverables
- Parametric CAD models prepared for additive manufacturing
- Functional prototypes and fit-check parts
- Lightweight lattices, jigs and custom fixtures
- Print-ready files with validated supports and orientation
- Production documentation and post-processing plans
These deliverables appear in industrial design, automotive, aerospace, medical products, consumer goods and research. Specialists can connect product requirements with printer capabilities and measurable quality criteria.
When Companies Need Help
Companies often bring in freelance expertise when an internal team needs to validate a new process, reduce material use or move from prototype to repeatable production. Germany’s manufacturing, industrial design and research environments make local context valuable for workshops, machine access and on-site testing. Remote collaboration works well for CAD, slicing and documentation; physical trials may require coordinated local access.
Skills Around the Process
Effective 3D printing work combines mechanical design, CAD, materials knowledge, slicing software and production planning. Useful adjacent skills include reverse engineering, topology optimization, tolerancing, metrology, CNC or injection-molding awareness, and quality documentation. Experience with tools such as Fusion 360, SolidWorks, Blender, Cura, PrusaSlicer and specialized metal-printing software can support different project needs.
Choosing a Strong Specialist
Look for professionals who explain trade-offs instead of recommending one printer or material for every part. Review examples that show the original requirement, chosen process, iterations and final inspection. Ask how they manage dimensional accuracy, surface finish, failed prints, file security and handover. For Germany-based work, clarify language expectations, on-site testing needs and coordination with production or design teams.
Frequently asked questions
Curious about 3D Printing? Here are the answers that come up again and again.
3D printing is used for prototypes, custom parts, production aids, replacement components and small production runs. It is especially useful when geometry is complex, customization matters or conventional tooling would slow down development.
Additive manufacturing builds parts layer by layer, which enables internal channels, lattices and shapes that can be difficult to machine. CNC machining often delivers stronger surface finishes and predictable material properties, so the choice depends on geometry, material, tolerance and production needs.
A strong 3D printing specialist may also work with CAD, reverse engineering, materials selection, slicing, metrology and mechanical design. Knowledge of CNC processes, injection molding or product validation can help when a part moves toward serial production.
The required experience depends on the outcome. Basic prototypes may need solid CAD and slicing knowledge, while metal parts, certified applications or repeatable production require deeper process control, material expertise and inspection practice.
3D printing work such as CAD preparation, design review, slicing and documentation can often be completed remotely. Printer setup, material trials, scanning and production validation may require access to equipment on site in Germany or close coordination with a local facility.
Ask for relevant examples covering the same material, process or part constraints. A capable 3D printing specialist should explain orientation, supports, tolerances, post-processing, inspection and how failed iterations are handled.
3D printing may be unsuitable when a part requires very high production volume, exceptionally smooth surfaces, strict anisotropy control or a material unavailable for the selected process. A specialist should compare it openly with machining, molding or other fabrication methods.
Common 3D printing workflows use CAD tools such as Fusion 360 and SolidWorks, mesh tools such as Blender, and slicers such as Cura or PrusaSlicer. STEP is common for solid models, while STL and 3MF are widely used for mesh-based print preparation.
The average hourly rate of freelancers in Germany who have used 3D Printing in their recent projects is 99 €, which corresponds to a daily rate of about 792 € based on an 8-hour working day.
Of the freelancers in Germany who have used 3D Printing in their recent projects, 85% hold at least a Bachelor's degree, 71% hold at least a Master's degree, and 18% hold a doctorate.
On average, freelancers in Germany who have used 3D Printing in their recent projects have 20 years of professional experience, with a single engagement typically lasting around 2.5 years.
The most common languages among freelancers in Germany who have used 3D Printing in their recent projects are German (96%), English (95%), and French (23%).
The most common industries among freelancers in Germany who have used 3D Printing in their recent projects are Manufacturing (91%), Automotive (55%), and Information Technology (51%).
The most common business areas among freelancers in Germany who have used 3D Printing in their recent projects are Product Development (92%), Information Technology (65%), and Research and Development (62%).
Main locations of FRATCH Experts, who have recently used 3D Printing
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin 
Munich Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
