Zebra Experts in Germany
in minutes from 15,000 CVs with vetted specialists and fast AI matching.Hire experts who configure Zebra printers, scan workflows, and mobile device setups, and who handle ZPL label output, RFID, and warehouse integration. Get precise matching with vetted, available freelancers.
Meet FRATCH Experts in Germany, who have recently used Zebra
Gabriele Caracausi
Last position:
Startup Mentor and Technical Advisor (Volunteer) at Faros Accelerator
- Mentoring startups about technology trends and solutions, business models, market and competition research.
David Bleyer
Last position:
Acting Partner at Bliestal Consulting UG
- Redesigning cablewise infrastructure with CAT 8.1 keystones, measuring the speed and quality of the new installation with Pockethernet, documentation at a local saddlery
- CAT 8.1 installation and building a data center, site linking, VPN and VLAN configuration for a local car dealership, implementation of IT-Security standards like virus protection (G Data) and firewalling (OPNSense)
- Relocation of a tax office with redesign of the IT infrastructure, virus protection (G Data) and backup solutions (QNAP)
- Planning, conception and implementation of an inhouse data center, BSI-compliant for commercial laundry (including Proxmox-based virtualization of existing infrastructures, QNAP, G Data, OPNSense, APC)
- Implementation and conception of security solutions in the SME sector
- Collaboration on the IT-security concept for the Bremen network of authorities (in the dLAN network)
- Creation of IT-security concept VOIS (modules MESO, KFZ/iKFZ) including audit preparation for KBA
- Expansion of the IT-security concept for the online service for electronic residence registration (eWA) to include use as an eFA (one-for-all) service (nationwide)
- Expansion of the IT-security concept to include modules wos & wvp
- Concept development for the implementation of DIN SPEC 27076 at MSEs and SMEs
- Creation and evaluation of emergency concepts
- Creation and evaluation of response actions and BCM plans
- Assessment of existing business continuity management (ISO 22301)
- Development of BCM strategy options
- Conducting awareness training
Georg Danebrock
Last position:
Senior Project Manager at Apleona GmbH
- Project review, restructuring, and PM for the migration of a total of 12,000 Windows workplace systems (650 applications) from SCCM and Empirum/Matrix42 to MS-Intune after a merger.
- Took over a heavily delayed / not ideally managed project in the role of the "firefighter".
- Completely revised and adjusted/updated the planning of the customer and the involved service provider.
- Introduced planning baselining as well as tracking/mitigation of current risks.
- Introduced an efficient, partially automated planning/reporting interface between MS Project Planning (service provider) and Jira (customer).
- Restructured meetings to increase efficiency and remove redundant appointments.
- Completed the analysis and design phase and created base data for migrations from heterogeneous systems of the two merged companies.
- Started the User Acceptance Test (UAT).
- Technologies: MS Autopilot, Zero Touch.
Dieter Bomblat
Last position:
Logistics Project Manager at VetLogOne GmbH
- Planning and construction of an AutoStore to increase space efficiency and avoid new logistics space. Acquisition, costing, and integration for national and international clients in the pharmaceutical sector.
- AutoStore implementation (30,000 bins, 30 robots) – +50% space efficiency, -15% throughput. Reduced staffing needs by 12% through automation.
Zouhair Hamama
Last position:
SAP S/4 HANA Developer at BGZ Essen
- Explorer phase: document preparations for development
- Getting started with the BTP documentation
- Documentation of WRICEFs
- Programming guidelines with consideration of Clean Core
- Analysis of customer programs to be migrated
- ABAP call monitoring (SCMON, SUSG)
- Creation of concept documents for the project
Marvin Manzatto-Bakalorz
Last position:
Field Service Coordinator (Freelance) at Elis Group
- Supported national site migration & the software team
- Installed printers, scanners, network cabinets, antennas, etc.
- Prepared and assigned hardware
- End-user support, administrative & production migrations, stakeholder management
- Ensured workstations were operational
- Configured printers and phased out outdated devices
Mathias Vogler
Last position:
Senior Android Developer / Freelancer at Adevinta
- Further development of the classifieds app
- Android
- Kotlin
- Coroutines
- Jetpack Compose
Gurpreet Dhami
Last position:
Anonym – German building materials manufacturer
- Creation of the profit center report and statistical key figures report
- Gathering and analyzing requirements regarding the forecast for revenue and costs
- Implementation of various time series analyses and optimization of predictions
- SAP process knowledge, SQL, Python
- Python with various libraries for time series analysis and machine learning
Andrey Sedelnikov
Last position:
Almando GmbH
- Fully ported an iOS app for controlling a range of audio devices over Bluetooth to Android in a short time.
- Seamlessly took over support and further development of the iOS app (Swift).
- Supported quality assurance of the overall solution.
- Developed a UI prototype and implemented integration of the new Wireless Audio Standard (WISA) for both platforms within the defined time frame.
Andreas Buchin
Last position:
First and 2nd Level Support at Louis
- Support for branches nationwide via RDP
Dmytro Grekov
Last position:
Retraining (IT Specialist System Integration) at Comcave
Discover over 15,000 top freelancers
Statistics of experts using Zebra
Aggregated from the professional profiles of matched freelancers.
Experience
22 years
Position duration
2.1 years
Positions per freelancer
12
Top business areas
Information Technology, Operations, Product Development
Top industries
Information Technology, Automotive, Manufacturing
Certification focus areas
Information Technology, Business Intelligence, Product Development
Bachelor's degree or higher
80%
Master's degree or higher
30%
Certifications per freelancer
3
Most common languages
German, English, French
Speak two or more languages
82%
Based on our profile pool as of 30 Aug 2026.
Daily rate distribution
The chart shows how the daily rates of freelancers in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows how many freelancers charge within that range.
Average rates of experts in Germany using Zebra
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 30 Aug 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
About the technology
Zebra in practice
Zebra is used for business printing and scanning in operations that need clear labels, reliable device capture, and traceable workflows. It appears in warehousing, logistics, retail, healthcare, and production lines where printers, scanners, and mobile devices must work together without friction.
Core tasks
- Set up Zebra printers and label templates
- Write and adjust ZPL label output
- Integrate scanners and handheld devices
- Connect print flows to ERP, WMS, or POS systems
- Support RFID and asset tracking projects
Ecosystem skills
Strong professionals know Zebra setup tools, driver management, firmware updates, and print queues. They also understand ZPL, device provisioning, network settings, and how to test labels on real hardware before rollout.
When to bring in help
Companies usually need freelance Zebra expertise when a print process breaks, a rollout moves to new sites, or old label logic has to be replaced. In Germany, this often involves coordination with local operations teams, while technical work can still be done remotely if the hardware setup is stable.
What strong experts deliver
Good specialists do more than fix a printer. They review label logic, reduce scan errors, align devices with business systems, and document the setup so support stays simple after handover.
Choosing the right specialist
Look for practical work with Zebra printers, scanners, and device management, not just general IT knowledge. The best experts can explain why a label fails, how they test changes, and how they keep printing reliable in daily operations.
Frequently asked questions
Curious about Zebra? Here are the answers that come up again and again.
Zebra is used for label printing, barcode scanning, handheld data capture, and device-based workflows in operations that need accuracy and traceability. It is common in warehouses, retail back rooms, healthcare, and manufacturing lines where labels and scans must stay consistent.
Zebra covers much more than printers. Many projects also involve barcode scanners, mobile devices, RFID, print servers, firmware, and device management tools. A strong specialist can connect all of those parts into one working setup.
Zebra is more specialized than a standard office print setup because it is built for labels, barcodes, tags, and operational workflows. Compared with generic printing, it usually needs tighter control over templates, fonts, code pages, and scanner behavior.
Zebra work often goes hand in hand with ZPL, network printing, driver setup, barcode formats, RFID basics, and integration with ERP, WMS, or POS systems. In larger environments, device provisioning and rollout planning matter just as much as the print logic itself.
Zebra projects can be simple or complex, but even small issues benefit from a specialist who has handled real hardware before. If the work touches label logic, multiple sites, or production-critical printing, you want someone who has already solved similar problems.
Zebra work is often remote when the specialist can access the print templates, device settings, and test files. On-site support helps when hardware needs physical setup, barcode scanners are misreading, or a warehouse needs local rollout coordination in Germany.
Zebra quality shows up in stable labels, clean scan results, and setups that are easy to maintain. Ask for examples of ZPL work, device rollouts, and how they test on real printers and scanners before handing over the solution.
Zebra freelancers should be ready to work with operations teams, support ticket flows, and hardware constraints. Clear communication matters because small changes in label size, fonts, or printer settings can affect the whole process.
The average hourly rate of freelancers in Germany who have used Zebra in their recent projects is 91 €, which corresponds to a daily rate of about 725 € based on an 8-hour working day.
Of the freelancers in Germany who have used Zebra in their recent projects, 80% hold at least a Bachelor's degree and 30% hold at least a Master's degree.
On average, freelancers in Germany who have used Zebra in their recent projects have 22 years of professional experience, with a single engagement typically lasting around 2.1 years.
The most common languages among freelancers in Germany who have used Zebra in their recent projects are German (100%), English (82%), and French (36%).
The most common industries among freelancers in Germany who have used Zebra in their recent projects are Information Technology (82%), Automotive (73%), and Manufacturing (73%).
The most common business areas among freelancers in Germany who have used Zebra in their recent projects are Information Technology (91%), Operations (64%), and Product Development (55%).
Main locations of FRATCH Experts, who have recently used Zebra
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
