Siemens NX Experts in Stuttgart
matched in minutes from over 15,000 CVs with the power of AIHire experts who create parametric models, assemblies and manufacturing data in Siemens NX, with experience across Teamcenter workflows, CAD migration and product lifecycle processes. FRATCH matches you quickly and precisely with vetted, available freelancers.
Meet FRATCH Experts in Stuttgart, who have recently used Siemens NX
Konrad M.
Last position:
Managing Director/Entrepreneur at M-CAD Müller & Partner GbR
- External engineering services and project support for automobile manufacturers and their suppliers according to their standards and specifications (e.g. Alfa-Romeo, Audi, Daimler AG, BMW, Ford, Fiat, General Motors, Hyundai, Land-Rover, Mahindra, Mercedes-AMG GmbH, Nissan, Iveco, MAN, PSA, Porsche, Proton, Renault, Smart, Suzuki, Tata Motors, Volvo, VW)
- Cooperation with MHG Fahrzeugtechnik GmbH, BorgWarner Turbo Systems GmbH, Eberspächer Exhaust Technology GmbH & Co. KG, BorgWarner Emission Systems GmbH, BIN Boysen Innovationszentrum Nagold GmbH & Co. KG, Miccavonics GmbH, Bizerba GmbH & Co. KG
- 3D modeling and development taking into account:
- Costs: short, targeted, efficient, scientific, innovative and competitive planning with little rework
- CFD (flow distribution, pressure loss, flow around and speeds in steady-state, unsteady, laminar, turbulent and multiphase flows)
- FEM/FEA (strength, modal, thermomechanical, fatigue and operational analyses, linear, nonlinear as well as static and dynamic structural assessments)
- Acoustics (flow-induced noise and vibrations)
- Manufacturing requirements (simplification of common-part concepts, material selection, integration of existing processes)
- Packaging compliance with suggestions for cost reduction and efficiency improvement
- Projects included:
- Exhaust manifolds for gasoline and diesel engines (3, 4, 6, 8 cylinders)
- Close-coupled and underfloor catalyst systems with SCR, urea injection and mixing chambers
- Compact commercial vehicle catalyst systems (one-box design) with fuel processor
- Catalyst systems in muffler systems for passenger cars
- Active Noise Cancelling (patented design and arrangement, prototype development and acoustic analysis)
- Development of test fixtures, prototypes and SCR distribution scanners
Vladimir G.
Last position:
Design Engineer (freelance) at BITZER Kühlmaschinenbau GmbH
- As part of the development of a new series of screw compressors, with a special focus on the design of a new electrical terminal box:
- Taking over the analysis of the design requirements and the relevant documents as well as CAD data
- Developing a well-thought-out concept for the design of the electrical terminal box
- Considering technical, economic, and safety-related requirements
- Compliance with safety regulations and IP protection requirements
- Taking into account design guidelines as well as assembly and user-friendliness
- Considering UL certification, plastic injection-mold-friendly design with Siemens NX, supplier requirements, cost-effectiveness, and scalability for the entire series
- Subsequent precise and targeted implementation of the design based on the developed concept
Jens S.
Last position:
Development, Engineering and Design at Jens Schrader
Jiesheng Z.
Last position:
Freelancer at Freelancer
- Design and optimization of LPG mounting bracket housing for commercial vehicle Daimler Truck using CATIA and Abaqus software
- Design, series support for plastic tank and steel tank systems including mounting concept on the body-in-white of various passenger car series from Daimler using Siemens NX Modeling and Sheet Metal software package
- Design of SCR tank system including mounting concept on the body-in-white of various passenger car series from Daimler using Siemens NX Modeling and Sheet Metal software package, produced with injection molding technology
- Design and series support for a conveying unit MFA2 Daimler using Siemens NX
- Design and simulation of body-in-white optimization for Great Wall Motor GWM pickup using CAITA and Abaqus Modeling and Sheet Metal software package
- Design of FTIV shut-off valve Padmini VNA Mechatronics Limited using Siemens NX Modeling and Sheet Metal software package, produced with injection molding technology, laser welded
- Design of wheel arch lining exterior for Mercedes GLC using Siemens NX, produced with injection molding technology
- Design of water injection system including mounting concept on the body-in-white of various passenger car series from Daimler AMG using Siemens NX Modeling and Sheet Metal software package, produced with injection molding technology
- Design and packaging study of hydrogen storage system including pressure cylinder (700 bar), mounting system, hydrogen line, manifold, pressure regulator, filler neck, etc. on the body-in-white of various passenger cars from Daimler using Siemens NX
- Design and integration of hydrogen storage system including pressure cylinder (700 bar), mounting system, hydrogen line, manifold, pressure regulator, filler neck, etc. on the body-in-white of various trucks from Voith using Siemens NX
- Design of body-in-white cover for Mercedes EQE SUV interior
Harry F.
Last position:
Freelance Designer at Felger Engineering
- Freelance design office in the field of design and engineering
- Consulting and sales of CAD software
- Software used: SolidWorks (3D), Inventor (3D), Creo Dynamics, Creo Elements, Siemens NX, Solid Edge (3D), AutoCAD (2D), Vellum / Draftboard (2D), Microsoft Office, SISTEMA
- Software training: SolidWorks (3D), Inventor (3D), AutoCAD (2D), Solid Edge (3D), Siemens NX, PTC Creo Dynamics and Creo Elements
Bernd M.
Last position:
Design Engineer at ReitlingerEngineering GmbH & Co. KG
- Worked on projects for Putzmeister – construction machinery and industrial pumps using Creo V17 with Workmanager and, since 2019, Siemens NX and Teamcenter
- Developed tooling and storage systems for KTC Handhabungstechnik using SolidEdge
- Designed machines for tunnel construction at Sänger GmbH with Solid Edge
- Engineered special low-loaders for heavy transport at Scheuerle TII Group using SolidWorks with MaxxDB
- Created test fixtures, predominantly for plastic parts, at Geiger und Schrage using SolidEdge and Creo
Wito J.
Last position:
Freelance Design Engineer at ENGGESA Maschinenbau GmbH
- Sheet metal design
- Design of various individual test fixtures for the automotive industry
- Test fixture for connectors
- CAD systems: SolidWorks
Discover over 15,000 top freelancers
Statistics of experts using Siemens NX
Aggregated from the professional profiles of matched freelancers.
Experience
29 years
Position duration
6.3 years
Positions per freelancer
6
Top business areas
Product Development, Production, Project Management
Top industries
Manufacturing, Automotive, Construction
Certification focus areas
Quality Assurance, Product Development, Human Resources
Bachelor's degree or higher
71%
Master's degree or higher
14%
Certifications per freelancer
2
Most common languages
German, English, Afrikaans
Speak two or more languages
86%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Stuttgart are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Stuttgart using Siemens NX
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Siemens NX experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (86%)
- Automotive (71%)
- Construction (43%)
- Professional Services (29%)
- Aerospace and Defense (14%)
- Education (14%)
- Energy (14%)
- Food and Beverage (14%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Product design with NX
Siemens NX is an integrated CAD, CAM and CAE environment for designing, validating and manufacturing complex products. Teams use it for parametric parts, assemblies, sheet metal, tooling and production-ready documentation. Its connected workflows help carry design intent from concept through engineering and manufacturing.
Core ecosystem
NX works across mechanical design, simulation and computer-aided manufacturing. Strong specialists understand synchronous and parametric modeling, assembly architecture, drafting, tolerancing and design reuse. They may also connect NX with Teamcenter, ERP systems, manufacturing equipment and customer data standards.
- Build robust part and assembly models
- Prepare drawings, tolerances and product structures
- Create CAM operations, toolpaths and postprocessor outputs
- Support Teamcenter-managed engineering processes
Where companies use it
Siemens NX appears in automotive, aerospace, industrial machinery, medical technology and consumer product programs. It supports everything from detailed component design to complex assembly planning and machining. In Stuttgart, specialists often contribute to mobility, manufacturing and supplier projects, while remote work can cover modeling, documentation and process setup.
When freelance expertise helps
Companies bring in freelance NX professionals during product launches, engineering capacity gaps, CAD migrations and manufacturing transitions. External support is also useful when a team must standardize templates, repair legacy models, automate repetitive tasks or prepare data for suppliers. The right specialist can contribute without disrupting established design controls.
What strong specialists deliver
A capable professional does more than operate the interface. They translate requirements into stable feature trees, practical assemblies and clear production documentation. They understand how modeling choices affect downstream simulation, tooling, machining and change management.
- Clarify design intent before modeling
- Keep large assemblies efficient and maintainable
- Apply naming, revision and release standards consistently
- Communicate clearly with design, manufacturing and quality teams
Selecting the right professional
Review comparable NX deliverables, not only software labels. Ask how the specialist handles imported geometry, complex surfacing, tolerance requirements, Teamcenter collaboration and manufacturing handover. For Stuttgart-based work, clarify the balance of on-site and remote collaboration as well as the language needed for workshops, documentation and supplier communication.
Frequently asked questions
Everything clients usually want to know about Siemens NX, in one place.
Siemens NX is used for product design, engineering validation and manufacturing preparation. Companies use it to create parts, assemblies, drawings, tooling, simulations and CNC toolpaths within connected workflows.
NX is often assessed alongside CATIA and SOLIDWORKS for mechanical design and product development. The best choice depends on surface complexity, assembly scale, manufacturing integration, data management and the systems already used by suppliers and internal teams.
A strong Siemens NX specialist may also bring Teamcenter knowledge, GD&T, tolerance analysis, sheet metal, advanced surfacing, CAM or CAE experience. Familiarity with ERP integration, CAD migration and engineering release processes can be important for larger programs.
The need depends on the deliverable rather than the software name alone. A focused modeling task may suit a specialist with a narrow skill set, while complex assemblies, surfacing, automation or Teamcenter processes require proven work on comparable products and data structures.
Siemens NX work can often be completed remotely when secure data access, clear file exchange and defined review routines are available. On-site collaboration in Stuttgart may be valuable for workshops, production trials, supplier coordination or access to restricted engineering systems.
NX specialists are most useful on site when design decisions depend on physical prototypes, shop-floor feedback, tooling checks or close coordination with manufacturing teams. Remote delivery remains practical for modeling, drawing updates, template work and structured CAD cleanup.
Ask for relevant examples of NX models, assemblies, drawings or manufacturing outputs, with confidential details removed. Review feature-tree logic, naming discipline, tolerances, revision handling and the specialist’s ability to explain trade-offs and downstream effects.
Siemens NX may appear as NX, Siemens PLM NX or Unigraphics, its former product name. Confirm the exact release, modules, data standards and Teamcenter setup before assessing whether previous project experience matches the current requirement.
The average hourly rate of freelancers in Stuttgart, Germany who have used Siemens NX in their recent projects is 70 €, which corresponds to a daily rate of about 561 € based on an 8-hour working day.
Of the freelancers in Stuttgart, Germany who have used Siemens NX in their recent projects, 71% hold at least a Bachelor's degree and 14% hold at least a Master's degree.
On average, freelancers in Stuttgart, Germany who have used Siemens NX in their recent projects have 29 years of professional experience, with a single engagement typically lasting around 6.3 years.
The most common languages among freelancers in Stuttgart, Germany who have used Siemens NX in their recent projects are German (100%), English (86%), and Afrikaans (14%).
The most common industries among freelancers in Stuttgart, Germany who have used Siemens NX in their recent projects are Manufacturing (86%), Automotive (71%), and Construction (43%).
The most common business areas among freelancers in Stuttgart, Germany who have used Siemens NX in their recent projects are Product Development (100%), Production (43%), and Project Management (43%).
Main locations of FRATCH Experts, who have recently used Siemens NX
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Countries:
Berlin Hamburg Munich Cologne Frankfurt 
Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
