Code Composer Studio Experts in Germany
matched in minutes from over 15,000 CVsHire experts who configure TI development environments, write and debug embedded C and C++ firmware, and optimize applications for Texas Instruments processors and microcontrollers. FRATCH matches you quickly with vetted, available freelancers who fit your technical needs.
Meet FRATCH Experts in Germany, who have recently used Code Composer Studio
Uwe S.
Last position:
Software Developer Embedded Systems at Self-employed
Viktor H.
Last position:
Freelance Software Developer at Thomas Magnete GmbH
- Development of embedded software for a valve prototype with LIN interface.
- Extension of the software architecture in Rhapsody.
- Implementation of the valve control as a state machine in Rhapsody.
- Implementation of a LIN stack for communication with the PLIN-LDF test environment.
- Integration & commissioning of the built-in bootstrap loader.
- MCU: Infineon TLE9867.
- IDE: Keil µVision5.
- Project management: GitLab.
- Architecture: Rhapsody Architect.
- CAN adapter: PEAK PLIN-USB.
Reshmi S.
Last position:
Software Engineer at Aumovio Engineering Services (formerly Continental Engineering Services)
- Programming: C/C++, Python, Embedded C, MATLAB
- Feature Owner for SecOC and FvM, leading development, integration, and validation
- Strong ECU hardware understanding for debugging
- Integrated AUTOSAR security modules: CSM, Crypto, CryIf, and HSM
- Hands-on experience with AUTOSAR BSW and MCAL configuration
- Implemented Secure Boot with DMA on Chorus MCU, improving boot performance
- Designed HSM key management and UDS-based key verification features
- Developed Python automation scripts to improve validation efficiency
- Performed ISO 26262 and ASPICE compliant development and testing
- Implemented diagnostics (DIDs, DTCs) for fault detection and reliability
- Strong knowledge of 32-bit MCU architectures and real-time systems
- Proficient in embedded C, compiler/debugger tools, and CANoe
- Experience with TLS, IPsec, key management, and Ethernet switch configuration
- Created architecture and system documentation for cross-team alignment
- Supported production ECU flashing and large-scale deployments
- Conducted functional safety-related tests to ensure system reliability
Mostafa S.
Last position:
Embedded Firmware Engineer at Esko-Graphics Imaging GmbH
- FPGA code conversion from AHDL to Verilog and SystemVerilog (Altera Cyclone)
- IDE: Intel Quartus Prime (Altera)
- Code simulation: QuestaSim
- Timing analysis
Suleman H.
Last position:
Software Developer at Smiths Detection Germany
- Software development in C++ with FreeRTOS as a real-time OS for controlling an x-ray scanner
- Hardware schematic review
- Define software architecture in the team
- Write test scripts in Bash and Python to check the interaction between the IO controller (NXP ARM-based MCU) and the system controller (Intel MCU)
- Use lightweight IP libraries to configure the Ethernet interface and create UDP and TCP sockets on the IO controller
- Use Wireshark and tcpdump for debugging
Christian P.
Last position:
Freelance Electrical Engineer at Self-employed
- Software development for microcontrollers and PCs
- Design of architecture and modular structures based on requirements
- Implementation in programming languages (preferably C, C#)
- Documentation in source code (e.g., Doxygen) and additional documents
- Use of version control and backup systems (e.g., SVN, GitLab)
- Developer testing
- Hardware development of microcontroller-based, digital and analog circuits including power electronics
- Circuit concepts (digital and controller circuits, analog, power electronics)
- Calculation of relevant parts
- Compliance with EMC and safety guidelines
- Simulations and component selection
- PCB implementation: layout, manufacturing data, EMC and safety guidelines
- Support of prototype manufacturing and series ramp-up
- Commissioning of prototypes
- Test development: manual and automated tests, test specifications, test stand conception and equipment selection
- Requirements management and maintenance (requirements specification)
- Support of certifications and series introductions
Discover over 15,000 top freelancers
Statistics of experts using Code Composer Studio
Aggregated from the professional profiles of matched freelancers.
Experience
25 years
Position duration
4 years
Positions per freelancer
10
Top business areas
Information Technology, Product Development, Quality Assurance
Top industries
Manufacturing, Automotive, Education
Certification focus areas
Information Technology, Product Development, Logistics
Bachelor's degree or higher
100%
Master's degree or higher
83%
Certifications per freelancer
5
Most common languages
German, English, Arabic
Speak two or more languages
100%
Based on our profile pool as of 29 Oct 2026.
Daily rate distribution
The chart shows how the daily rates of experts in this technology in Germany are distributed, based on recent contracts on our platform. Each bar covers a rate range — its height shows the share of experts charging within that range.
Average rates of experts in Germany using Code Composer Studio
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 29 Oct 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Code Composer Studio experts industry focus
See which industries our matched freelancers work in most often — every figure is calculated live from the freelancers on FRATCH.
- Manufacturing (83%)
- Automotive (67%)
- Education (67%)
- Information Technology (50%)
- Professional Services (50%)
- Aerospace and Defense (33%)
- Healthcare (33%)
- Energy (17%)
Please note that freelancers can work across multiple industries, so percentages overlap.
About the technology
Embedded development
Code Composer Studio, often called CCS, is Texas Instruments’ integrated development environment for embedded software. It combines source editing, compilation, debugging, profiling and device configuration for TI microcontrollers, digital signal processors and application processors. Companies use it to create firmware for industrial controls, automotive electronics, robotics, energy systems and connected devices.
TI ecosystem
CCS connects closely with Texas Instruments hardware, software development kits and processor families. Strong specialists work with TI compiler toolchains, Code Composer Studio projects, board support packages, device drivers and real-time operating systems such as TI-RTOS and FreeRTOS. They also understand JTAG probes, launch configurations, linker command files and peripheral configuration tools.
Typical deliverables
Projects vary from a small firmware change to a complete embedded product. Experienced professionals can contribute to:
- Device initialization and peripheral drivers
- Embedded C and C++ firmware for TI chips
- Real-time control loops and signal-processing applications
- Hardware bring-up, debugging and performance profiling
- Build, test and release workflows for embedded products
When to bring in help
Companies often need freelance expertise when a new TI board must be brought up, existing firmware needs modernization or a product team faces a difficult timing and memory issue. Specialists can shorten investigations into compiler warnings, interrupt behavior, peripheral failures and linker problems. In Germany, they may work remotely with hardware teams or join on-site laboratory sessions when physical equipment and measurement tools are central to the project.
Skills that matter
Good CCS specialists read schematics, data sheets and reference manuals as confidently as source code. They understand memory maps, interrupts, DMA, clock configuration, boot sequences and hardware debugging. Useful adjacent skills include Git, continuous integration, unit testing, serial protocols, CAN, Ethernet, oscilloscopes and logic analyzers. Familiarity with safety-oriented development practices is valuable in regulated embedded environments.
Judging technical quality
Look for professionals who can explain a complete path from board configuration to tested firmware, not just experience with the IDE. Ask how they isolate hardware and software faults, manage compiler and linker settings, review generated code and protect real-time behavior during changes. A strong specialist documents assumptions, reproduces defects, leaves a maintainable project structure and communicates clearly with electronics, firmware and product teams.
Frequently asked questions
Quick answers to the questions that come up most around Code Composer Studio.
Code Composer Studio is used to develop, compile, flash and debug embedded software for Texas Instruments processors and microcontrollers. It supports firmware work ranging from peripheral control and motor applications to digital signal processing and real-time industrial systems.
Code Composer Studio is tailored to Texas Instruments devices and their compiler, debugger and development kits. Generic environments such as Eclipse-based tools, Visual Studio Code or vendor-neutral build systems can offer broader flexibility, but they may require more manual setup for TI-specific debugging and device configuration.
A strong Code Composer Studio specialist usually brings embedded C or C++, hardware bring-up and JTAG debugging skills. Knowledge of TI processors, linker command files, RTOS concepts, Git, automated testing and interfaces such as SPI, I2C, UART or CAN is also useful.
A Code Composer Studio freelancer should have relevant experience with the TI device family, board design and firmware goals involved in the project. Ask for examples of debugging on real hardware, managing memory and timing constraints, and delivering documented, testable code rather than relying only on IDE familiarity.
Much Code Composer Studio work can be completed remotely when the specialist has access to the required boards, probes and build environment. On-site collaboration in Germany can still help with laboratory testing, hardware faults and close coordination between electronics and firmware teams.
A TI Code Composer Studio specialist is particularly useful during board bring-up, difficult peripheral integration, real-time performance issues or migration between TI device families. They can also stabilize inherited projects where build settings, linker behavior or debugging workflows are poorly documented.
Many teams simply call Code Composer Studio CCS, while others use the shorter name Code Composer or refer to it as the TI development environment. These names usually describe the same Texas Instruments tool, so project discussions should still clarify the exact release, device family and compiler setup.
A capable Code Composer Studio freelancer can explain how they separate hardware, firmware, compiler and configuration faults. Review their approach to version control, reproducible builds, test coverage, memory analysis, debugging evidence and documentation, then use a focused technical discussion to confirm that their experience matches the target TI hardware.
The average hourly rate of freelancers in Germany who have used Code Composer Studio in their recent projects is 91 €, which corresponds to a daily rate of about 729 € based on an 8-hour working day.
Of the freelancers in Germany who have used Code Composer Studio in their recent projects, 100% hold at least a Bachelor's degree and 83% hold at least a Master's degree.
On average, freelancers in Germany who have used Code Composer Studio in their recent projects have 25 years of professional experience, with a single engagement typically lasting around 4 years.
The most common languages among freelancers in Germany who have used Code Composer Studio in their recent projects are German (100%), English (100%), and Arabic (33%).
The most common industries among freelancers in Germany who have used Code Composer Studio in their recent projects are Manufacturing (83%), Automotive (67%), and Education (67%).
The most common business areas among freelancers in Germany who have used Code Composer Studio in their recent projects are Information Technology (100%), Product Development (100%), and Quality Assurance (83%).
Main locations of FRATCH Experts, who have recently used Code Composer Studio
Our freelancers and interim experts are at home across the DACH region — available on-site in the major business hubs or fully remote. Choose a location to discover matched specialists, local market insights and up-to-date availability.
Berlin Hamburg Munich Cologne Frankfurt Stuttgart Dusseldorf Leipzig Dortmund Essen Bremen Dresden Hanover Nuremberg Request a free demo
Get in touch with the FRATCH team and we will get back to you within 4 hours.
Would you rather directly get in touch?
We always have the time for a call or email!
Philipp Thomaschewski
FRATCH CEO
