Experience
Self-Schooling
- PLC Programmable Logic Controller / SPS Programmable Logic Controller
- LD Ladder Diagram / Ladder Logic
- ST Structured Text
- CodeSys
Risk Management / Standards Compliance / Requirements Engineer
Teiimo GmbH
- Risk management and standards compliance to develop and bring to market a medical device
- Elicit requirements and copy into a database from common medical device industry standards such as ISO 13485, IEC 62304, ISO 14971, IEC 60601
- Software tools: Greenlight Guru
Requirements / System Engineer
Questax / HELLA GmbH & Co. KGaA
- Requirements and system engineering for battery management system (BMS)
- Work with Doors System and diagnostics databases
- Participate in requirements reviews
- Software tools: Doors Classic, PTC Integrity, Zedis Diagnostics Databank from BMW, ReqPat from Fraunhofer IEM
Requirements Engineer
Seneos / Hitachi Astemo
- Requirements engineering for an inverter for VW electric automobile according to ASPICE SYS.1 and SYS.2
- Contributed to writing the Systems Engineering Management Plan (SEMP)
BBLeap
- Implemented a network socket for inter-process data communication between a Python program and a PLC in Structured Text
- Software tools: Python, PLC Structured Text, CodeSys V3.5, Docker, Linux Ubuntu in Oracle VirtualBox, Slack, EPEC 6200 Remote Access Unit running Linux
Requirements Engineer
APTIV Services Deutschland GmbH
- Created and maintained diagnostic software requirements specification (ASPICE SWE.1)
- Led SRS requirements review and participated in Diagnostic Product Definition Document (ASPICE SYS.2) review
- Software tools: Doors, Jira, Confluence, BMW ZEDIS, Excel
Brusa Electronics
- Prepared in Sennwald, Switzerland and provided on-site training and consulting in automotive diagnostics for Inosa (Shenzhen Inovance Technology) in Shenzhen, China
Preh GmbH
- Entered diagnostics requirements into product specification in Doors
- Maintained CAN database DBC file
Küster Automotive
- Developed and tested UDS diagnostics for Autosar shift-by-wire gear shift
- Set up measurement diagnostics (DCM) and diagnostic events (DEM) in Tresos
- Programmed freeze frames to be stored in NvM with device errors
- Developed capability to store and automatically update a table of program variables in NvM according to software version
- Software tools: CANoe, Elektrobit Tresos, Tortoise Subversion, Siemens Polarion ALM
Behr-Hella Thermocontrol GmbH
- Developed and tested UDS diagnostics for Autosar automobile air conditioner
- Executed development and maintenance tasks in an IBM Rational Change database
- Programmed measurement diagnostics, actuator tests, and routine control diagnostics
- Tested diagnostics with VW Odis Test Program
- Programmed and tested functions for Subbus diagnostics on LIN subbus
ZF Friedrichshafen AG
- Performed various development and test tasks for inverter power electronics using an Infineon Aurix multicore processor
- Software tools: ClearCase version control, ClearQuest change management, Lint static code analyzer, Lauterbach Debugger, iSYSTEM Debugger, Vector Informatik CANape
Behr-Hella Thermocontrol GmbH
- Developed and tested UDS diagnostics for Autosar automobile air conditioner
- Software tools: Telelogic Doors, MKS version control, IBM Rational Change, Lint, Vector Informatik CANoe, Elektrobit Tresos Studio
Continental AG
- Worked on blind spot detection radar sensor including customization of UDS diagnostic services and Autosar Diagnostics Event Manager (DEM)
- Performed tasks for flash bootloader for driver assistance systems (ADAS)
- Software tools: Telelogic Doors, IBM Rational Rhapsody, Eclipse, Vector Informatik CANoe, Vector Informatik GENy, Lauterbach JTAG Debugger, MKS Source Integrity, QAC Static Analyzer
ZF Friedrichshafen AG
- Integrated a standardized error diagnostics system into a transmission control program
- Added CAN and SAE J1587 communications capabilities to a transmission control program
- Analyzed a transmission control program using an in-circuit emulator
- Performed comparative measurement of internal function runtimes using a self-developed Monte Carlo algorithm
- Software tools: Microsoft Visual Studio, ClearCase, ClearQuest, Doors, Lint static code analyzer
Industry experience
See where this freelancer has spent most of their professional time.
Experienced in Automotive, Manufacturing, and Healthcare.
Business area experience
See which departments and functions this freelancer has contributed to most.
Experienced in Product Development, Quality Assurance, and Information Technology.
Frequently asked questions
Have questions? Find more information here.
Ralph is based in Mülheim an der Ruhr, Germany and prefers 100% remote projects.
Ralph speaks the following languages: English (Native), German (Advanced).
Ralph has at least 17 years of experience. During this time, Ralph has worked in at least 3 different roles and for 12 different companies. The average length of individual experience is 1 year and 3 months. Note that Ralph may not have shared all experience and actually has more experience.
Based on recent experience, Ralph would be well-suited for roles such as: Risk Management / Standards Compliance / Requirements Engineer, Requirements / System Engineer, Requirements Engineer.
In recent years, Ralph has worked for Self-Schooling, Teiimo GmbH, Questax / HELLA GmbH & Co. KGaA, and Seneos / Hitachi Astemo.
Ralph is most experienced in industries like Automotive, Manufacturing, and Healthcare.
Ralph is most experienced in business areas like Product Development, Quality Assurance, and Information Technology. Ralph also has some experience in Customer Service.
Ralph has recently worked in industries like Manufacturing, Automotive, and Healthcare.
Ralph has recently worked in business areas like Product Development, Information Technology, and Quality Assurance.
Ralph holds a Master in Business Administration from University of Texas at Dallas and a Bachelor in Electrical Engineering from University of Colorado at Boulder.
The availability of Ralph needs to be confirmed.
Daily rate distribution
The rates shown represent the typical market range for freelancers in this position based on recent contracts on our platform.
Average rates for similar positions
Rates are based on recent contracts and do not include FRATCH margin.
The average daily rate is the mean of all daily rates from recent contracts of comparable freelancers on our platform.
The median daily rate is the middle value of all daily rates — half of comparable freelancers charge less, half charge more. Unlike the average, it is barely affected by outliers.
Calculated based on our freelancers’ daily rates as of 18 Nov 2026. Actual rates may vary depending on seniority level, experience, skill specialization, project complexity, and engagement length.
Similar freelancers
Discover other experts with similar qualifications and experience
Johannes F.
Last position:
Project Management Conveyor Technology at Amazon Deutschland Transport GmbH
Retrofit of 10 existing distribution centers with ASML (automated scan manual labelling)
Automation of conveyor technology at the induct with the goals of improving ergonomics, reducing costs, and increasing throughput
Adaptation of existing MHE (material handling equipment)
Supplier management (internal and external)
Construction site coordination
Detailed planning and execution of the implementation concept
Acceptance tests for machine safety, Machinery Directive
Planning and execution of IOQ, SWEH, SAT, Launch
Ensuring compliance with costs, deadlines, and scope
Risk management
PM coaching of the project team and suppliers
Leading multiple international teams
International communication/coordination of sites (Delivery Stations AMZL, suppliers), RME, Ops, Safety, PMO, and Quality
Methods and tools: Interim project management, project management (classic, agile, hybrid), change management, V-model, Scrum, Ozark, Chime, PtW, RightCrowd, stakeholder management, scheduling, cost planning, resource planning, controlling, conveyor technology, logistics, mechanical engineering, construction site coordination, claim management, requirements management, specifications, functional specification, supply chain management, risk management, FMEA, lessons learned, supplier management, team leadership, communication (international)
Basel J.
Last position:
Senior Application Engineer / Product Manager at Altran Magnetics LLC
- Oversee development and optimization of key products, including DP contactors, EMI filters, and circuit breakers.
- Lead certification processes ensuring compliance with UL, TÜV, and VDE standards.
- Act as technical liaison between customers, sales teams, and manufacturing to deliver customized solutions.
Frank B.
Last position:
Subproject Lead Control Technology at Aumann Beelen GmbH
- Concept creation and detailed design for a battery module assembly line
- Commissioning coordination at a large Bavarian automotive manufacturer
Uwe K.
Last position:
Software Architect / Developer at Manufacturer of packaging and filling machines in the pharmaceutical industry
- Migration of an Excel-based parameterization software into a .NET application based on .NET 8 and WPF.
- Use of MS SQL Server as the primary database with generic access to SQLite for portability.
- Reengineering of complex macros and database-like structures in Excel sheets for input dialogs and validations.
- Integration and optimization of the solution to ensure easy-to-use operation.
- System environment: Windows 10 (x64), MS SQL Server, SQLite, Visual Studio Pro. 2022 with .NET 8.0, C# with WPF, VBA scripting with Excel, GIT.
Sven R.
Last position:
Software Developer - Building Automation
- Test controller unit
- Implement test environment
- Implement virtual nodes
- Commission CANopen network
- Define and automate test cases
- Design and implement LSS state machine
- Implement data exchange between tools
- Port requirements to vTestStudio in XML format
- Products: CANoe, vTestStudio, Playwright, Cypress, Robot, .NET
- Knowledge: CAPL, C++, CANopen, concept development, Python, JavaScript, XML, C#
Rick O.
Last position:
Interim Operation Manager at Element Materials Technology Holding Germany GmbH
- Operation manager, plant and project manager
- Project and change management
- Restructuring & crisis management
- Process optimization
- Establishment of shopfloor management
- Implementation of lean management
- Technology integration and automation
Experts recently working on similar projects
Freelancers with hands-on experience in comparable project as a
Nearby freelancers
Professionals working in or nearby Mülheim an der Ruhr, Germany
